Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
iio: buffer: serialize buffer teardown with mode claims
In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: serialize buffer teardown with mode claims
Buffer-mode claims hold mlock to guarantee that the device remains in
buffer mode until the claim is released. Normal buffer updates take
info_exist_lock followed by mlock in iio_update_buffers().
However, iio_device_unregister() disables and deactivates all buffers
without taking mlock. This can invalidate buffer state, including
active_scan_mask, while a buffer-mode claim is held.
Take mlock in iio_disable_all_buffers() so that unregister honors the
mode-claim lifetime guarantee. The info_exist_lock -> mlock orderi
In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: adis16136: fix unprotected debugfs reads
The serial_number file operations are open coded and never call
debugfs_file_get(), which debugfs_create_file_unsafe() requires.
debugfs_remove_recursive() therefore does not wait for a read in
progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
iio: health: max30102: fix NULL dereference in interrupt handler
In the Linux kernel, the following vulnerability has been resolved:
iio: health: max30102: fix NULL dereference in interrupt handler
The interrupt is requested in max30102_probe() and stays enabled
for the lifetime of the device, but indio_dev->active_scan_mask is only
valid while a buffer is enabled. When an interrupt arrives while no
buffer is enabled, the handler dereferences the NULL active_scan_mask:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
__bitmap_weight+0x64/0x98 (P)
max30102_interrupt_handler+0x48/0x160 [max30102]
Call max30102_fifo_count() at the top of the handle
In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16400: fix unprotected debugfs reads
adis16400_serial_number_fops is open coded and never calls
debugfs_file_get(), so debugfs_remove_recursive() does not wait for a
read in progress and unbind frees the iio_dev underneath it.
Commit ae1d37a9bb4b ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE
instead of DEFINE_SIMPLE_ATTRIBUTE") converted product_id and
flash_count to DEFINE_DEBUGFS_ATTRIBUTE, which protects itself, but
moved all three files to debugfs_create_file_unsafe().
serial_number prints three registers as "%.4x-%.4x-%.4x" and
DEFINE_DEBUGFS_ATTR
In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16480: fix unprotected debugfs reads
The firmware_revision and firmware_date file operations are open coded
and never call debugfs_file_get(), which debugfs_create_file_unsafe()
requires. debugfs_remove_recursive() therefore does not wait for a read
in progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
iio: light: gp2ap020a00f: drain irq_work after free_irq
In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap020a00f: drain irq_work after free_irq
The threaded IRQ handler queues data->work through irq_work_queue() so
the trigger is polled from a per-CPU context. free_irq() does not flush
an irq_work the handler already queued, so after gp2ap020a00f_remove()
returns that work may still run and call iio_trigger_poll() on data->trig,
which the devm cleanup has already freed, causing a use-after-free.
Add irq_work_sync(&data->work) after free_irq() in remove() and in the
probe error path, mirroring commit 78601726d4a5 ("iio: trigger: sysfs:
fix use-after-free on r
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure
In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure
pm_runtime_set_active() failing in probe() jumps to error_unreg_buffer,
which only calls iio_triggered_buffer_cleanup() -- it does not undo the
iio_device_register() that already succeeded a few lines above. probe()
then returns the error, the devm-managed indio_dev is freed, but the
iio core still has it registered: the sysfs/chardev nodes stay live and
point at freed memory.
Add an error_unreg_dev label that unregisters the iio device before
falling through to the existing buffer cleanup, mir
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
iio: trigger: cancel reenable_work before freeing trigger
In the Linux kernel, the following vulnerability has been resolved:
iio: trigger: cancel reenable_work before freeing trigger
iio_trigger_notify_done_atomic() defers ->reenable() into
trig->reenable_work on the system workqueue, and the worker dereferences
the owning trigger through container_of(). Nothing cancels this work
before iio_trig_release() frees the trigger, so a worker armed by the
last in-flight IRQ can outlive the free and touch freed memory.
Cancel it at the top of iio_trig_release(), which every free path
reaches through the device core's final put_device().
Found by an in-house static analysis tool.
In the Linux kernel, the following vulnerability has been resolved:
perf: Require kernel access for text poke events
Perf events with exclude_kernel=1 can be opened without kernel perf
access. However, exclude_kernel does not suppress text-poke sideband
records. Every PERF_RECORD_TEXT_POKE is marked PERF_RECORD_MISC_KERNEL
and contains a raw kernel instruction address.
An unprivileged task can therefore open and mmap a task-local software
event with text_poke=1. Both opening a count-only tracepoint event and
configuring UDP GRO for ESP-in-UDP cause updates to inline static calls;
the observer receives the relocated addresses of the modifie
KVM: s390: Add missing srcu in kvm_s390_set_irq_state()
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Add missing srcu in kvm_s390_set_irq_state()
Like kvm_s390_inject_vcpu(), kvm_s390_set_irq_state() also needs the
kvm->srcu or the slots lock when performing the Store status operation.
Fix by taking kvm->srcu in kvm_s390_set_irq_state().
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
bpf: Fix divide-by-zero in btf_struct_walk()
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix divide-by-zero in btf_struct_walk()
When an access goes past the struct and the last member is a flexible
array, btf_struct_walk() folds the offset back into a single element with
(off - moff) % t->size, but never checks that the element type has a size.
BTF takes an empty struct, so this in program BTF
/* event could be empty */
struct event {
#ifdef HAVE_TIMESTAMP
__u64 ts;
#endif
};
struct batch {
int nr;
struct event events[];
};
divides by zero at prog load time. Getting there needs a PTR_TO_BTF_ID that
is not MEM_ALLOC, e.g. a plain read of a
bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch()
In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch()
__htab_map_lookup_and_delete_batch() has no rescheduling point. The
batch count bounds how many entries are copied out, not how many
buckets are visited, so one BPF_MAP_LOOKUP_BATCH call can walk the
map end to end. The empty-bucket fast path is worse: it stays inside
a single rcu_read_lock() / bpf_disable_instrumentation() section for
any run of consecutive empty buckets.
That holds up on small maps, but it falls apart at scale. On a
144-CPU arm64 host running a CONFIG_PREEMPT_NONE kernel, periodic
BPF_MAP_LOO
bpf: Fix out-of-bounds read of rtt_min in sock_ops
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix out-of-bounds read of rtt_min in sock_ops
A sockops prog reading skops->rtt_min never checks the sk type: on the
tcp_conn_request() path sock_ops->sk is a request_sock (non-full), and the
ctx rewrite casts it to a tcp_sock (full) and reads rtt_min past the end of
the request_sock, returning dirty adjacent memory.
SEC("sockops")
int prog(struct bpf_sock_ops *skops)
{
switch (skops->op) {
case BPF_SOCK_OPS_RWND_INIT:
leak = skops->rtt_min; /* reads the request_sock OOB */
...
}
}
For instance one such read returned rtt_min=0xffff8881, the high half
HID: amd_sfh: Validate PCI BAR size before mapping
In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: Validate PCI BAR size before mapping
The amd_sfh driver maps PCI BAR 2 using pcim_iomap_regions() and
subsequently accesses MMIO registers at offsets up to 0x10958 (e.g.,
AMD_P2C_MSG3 at 0x1068C). However, the driver never validates that the BAR
size is large enough to cover these accesses. If the driver is bound to a
device with a smaller BAR 2, this leads to an out-of-bounds memory access
and a page fault during the probe function.
For example, a page fault can occur when reading from privdata->mmio +
AMD_P2C_MSG3 in mp2_select_ops():
BUG: unable to hand
squashfs: Add dictionary size range check to prevent shift-out-of-bounds
In the Linux kernel, the following vulnerability has been resolved:
squashfs: Add dictionary size range check to prevent shift-out-of-bounds
When an abnormal SquashFS image (COMP_OPTS flag is 1 but dictionary size
is 0) is mounted, and performs shift operations using dictionarysize, the
shift exponent is -1, causing a shift-out-of-bounds.
Detail as below:
squashfs_comp_opts(msblk, buffer, length)
squashfs_xz_comp_opts()
if (comp_opts)
n = ffs(opts->dict_size) - 1;<----opts->dict_size=0, n=-1
if (opts->dict_size != (1 << n) && opts->dict_size !=
(1 << n) + (1 << (n + 1))) <----shift-out-of-bounds
Fix it by adding a di
In the Linux kernel, the following vulnerability has been resolved:
scsi: sd_zbc: Reject disks with too many zones
sd_zbc_read_zones() computes the number of zones with 64-bit arithmetic and
stores the result in the unsigned int nr_zones field of struct
zoned_disk_info, silently truncating counts that exceed 32 bits. The
truncated count is later used to size per-zone resources, while the device
may still report more zones than fit.
Moreover, sd_zbc_report_zones() counts the reported zones with a signed int
zone_idx, which overflows past INT_MAX. Reject devices reporting more than
INT_MAX zones at scan time; such a device is not realistic f
In the Linux kernel, the following vulnerability has been resolved:
xsk: Use a 32-bit compare in xsk_map_gen_lookup
xsk_map_gen_lookup() loads a u32 key and compares it with max_entries
using BPF_JMP_IMM. BPF immediates are sign-extended to 64 bits, so a
max_entries value of 0x80000000 or higher becomes a threshold larger
than every zero-extended 32-bit key. An out-of-range index then skips
the bounds check and the generated lookup reads past xsk_map[].
Compare with BPF_JMP32_IMM so the check stays in 32-bit unsigned range.
bpf: Make post-verification instruction rewrites killable
In the Linux kernel, the following vulnerability has been resolved:
bpf: Make post-verification instruction rewrites killable
After do_check() returns, the verifier runs several instruction rewrite
passes. Some of them patch or remove one instruction at a time. Each
operation moves the remaining instruction and auxiliary-data arrays and
adjusts all branch offsets, making the overall work quadratic in the
program length.
A privileged loader can submit 131072 unconditional jumps by zero followed
by a valid return. Verification finishes quickly, but bpf_opt_remove_nops()
then spends a long time removing each jump separately. Since this
post-v
bpf: Restrict CO-RE poisoning to relocatable instructions
In the Linux kernel, the following vulnerability has been resolved:
bpf: Restrict CO-RE poisoning to relocatable instructions
CO-RE relocation records can name any instruction offset. When a
relocation cannot be resolved, bpf_core_patch_insn() currently poisons its
target before checking whether that instruction is a valid relocation
target. Malformed metadata can therefore replace jumps, calls, exits,
register-source arithmetic, or non-immediate loads instead of failing at
the relocation step.
Handle poisoning only after the instruction has passed the same class and
operand-form checks used for a resolved relocation. Route invalid forms
t
netfilter: flowtable: publish HW_DEAD after worker is done
In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: publish HW_DEAD after worker is done
flow_offload_work_del() sets NF_FLOW_HW_DEAD before the work handler
clears NF_FLOW_HW_PENDING. Once a flow is both HW_DYING and HW_DEAD, a
concurrent garbage collection pass can remove it and schedule it for RCU
freeing.
The offload worker holds neither an RCU read lock nor a reference to the
flow. If it is preempted after publishing HW_DEAD, the RCU callback can
free the flow before the worker resumes and clears HW_PENDING, resulting
in a use-after-free.
Move HW_DEAD publication to the common worker epilogue aft