KVM: arm64: Don't WARN on an unknown VM ioctl in protected mode
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Don't WARN on an unknown VM ioctl in protected mode
kvm_pkvm_ioctl_allowed() WARNs when kvm_get_cap_for_kvm_ioctl() doesn't
find the ioctl number in vm_ioctl_caps[], and kvm_arch_vm_ioctl() calls
it for every number the generic code doesn't handle, so
ioctl(vm_fd, 0xdeadbeef) from userspace taints a pKVM host and panics it
under panic_on_warn. The lookup is fed userspace input: return false,
and userspace gets the -EINVAL kvm_arch_vm_ioctl() returns for that
number on a host without pKVM.
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix AArch32 DBGBXVR<n> handling
The consolidation of the breakpoint and watchpoint register accessors
switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter
selects backing storage with demux_wb_reg(), which only handles Op2 values
4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits
KVM_BUG_ON() and marks the VM dead.
DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor
already selects the upper half. Map Op2 1 to dbg_bvr[] alongside Op2 4,
restoring the pre-regression behavior.
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix spurious warning for benign stage 2 teardown race
kvmtool was used to establish an L1 guest with 8 CPUs and 8 GiB of RAM, an
L2 guest with 4 CPUs and 4 GiB of RAM and an L3 guest with 2 CPUs and 2 GiB
of RAM, all of which was then exited.
Under memory pressure in the L0 host warnings were observed due to
migration triggered by compaction:
WARNING: arch/arm64/kvm/mmu.c:336 at __unmap_stage2_range+0x64/0x80,
CPU#5: kcompactd0/66
Which was, in turn, triggered by an MMU notifier for the host invalidation:
mmu_notifier_invalidate_range_start()
-> ... -> kvm
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix null ptr deref on nested wp/unmap, teardown race
Commit 7270cc9157f4 ("KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU
notifiers") introduced VNCR_EL2 invalidation in both kvm_nested_s2_unmap()
and kvm_nested_s2_wp().
However at the point of this being performed concurrent stage 2 teardown of
a nested guest can cause kvm->arch.mmu.pgt to be set to NULL.
This happens in kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() ->
kvm_free_stage2_pgd() and is performed under the kvm->mmu_lock.
Commit ec14c272408a ("KVM: arm64: nv: Unmap/flush shadow s
KVM: arm64: Transfer the hyp stack pages out of the host stage-2
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Transfer the hyp stack pages out of the host stage-2
fix_host_ownership() walks only the linear-map alias of each memblock
region, and the per-CPU hyp stack, mapped in the private VA range for
its guard page, has none.
Walk each stack's VA range with the same walker.
RISC-V: KVM: Serialize IMSIC attributes with vCPU migration
In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Serialize IMSIC attributes with vCPU migration
KVM device ioctls are not serialized against KVM_RUN. As a result,
kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of
an IMSIC VS-file before a concurrent vCPU migration releases it.
The HGEI can then be allocated to another vCPU before imsic_vsfile_rw()
uses the stale tuple. A GET or SET attribute may consequently access the
new owner's interrupt file.
Serialize the entire IMSIC attribute operation with the target vCPU
mutex. This prevents the VS-file from being migrated and recycled until
t
RISC-V: KVM: Synchronize hrtimer callback during teardown
In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Synchronize hrtimer callback during teardown
The non-Sstc hrtimer callback clears next_set before its final uses of
the enclosing vCPU. If teardown observes next_set as false while the
callback is still running, kvm_riscv_vcpu_timer_cancel() skips
hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the
callback enters kvm_riscv_vcpu_set_interrupt().
A guest can arm the timer with SBI TIME and request shutdown with SBI
legacy shutdown or SRST. A VMM that honors KVM_EXIT_SYSTEM_EVENT and
destroys the VM supplies the teardown side of the race; no
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags
schedule_deferred_locked() skips scheduling a deferred action while
SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows
a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged
enqueue flags, which include the flags stashed for a remote activation.
move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the
destination rq when the moved task was woken up, although no
task_woken_scx() follows that activation.
An IMMED insert into a busy destination requests a lo
Bluetooth: hci_conn: fix CIS hold ownership on reuse
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix CIS hold ownership on reuse
Commit 69997d50ec57 ("Bluetooth: ISO: handle bound CIS cleanup via
hci_conn") made hci_bind_cis() and hci_connect_cis() return a
connection with one hold for the ISO layer. hci_bind_cis() currently
takes that hold only after configuring a CIS, so its BT_CONNECTED and
matching BT_BOUND paths return a bare lookup result. Its configuration
failure path can likewise call hci_conn_drop() before taking a hold.
Take the hold before any state-dependent return or configuration error
so every successful return follows the docume
Bluetooth: hci_sock: validate event length before filtering
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: validate event length before filtering
is_filtered_packet() reads the event code from skb->data[0] without first
checking that the skb is nonempty. When an opcode filter is configured,
it also reads the command opcode at offsets 3 or 4 without checking that
a Command Complete or Command Status event is long enough.
hci_send_to_sock() invokes the filter before hci_event_packet() validates
the event header. A malformed event supplied by a controller or a vhci
device can therefore cause an out-of-bounds read.
Keep the unmasked event code for the opcode c
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: reject out-of-range OCF values
The raw HCI socket security filter has 128 OCF bits per supported OGF,
but masks the 10-bit OCF with 127 before looking up the command. An
unprivileged socket can therefore submit a reserved OCF that aliases an
allowlisted command modulo 128.
A conforming controller should reject reserved opcodes. Nevertheless,
the security decision must apply to the opcode that will actually be
sent, especially since controller-specific behavior is outside the host
stack's control.
Reject OCF values that cannot be represented by the sec
Bluetooth: ISO: balance the parent hold in hci_bind_bis()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: balance the parent hold in hci_bind_bis()
hci_conn_link() takes a lifetime reference to its parent with
hci_conn_get(), but only takes an operational hold on the child.
hci_conn_unlink() later balances both a hold and a reference on the
parent.
The SCO and CIS paths pass a parent acquired from a connect helper, so
it already has a hold. For an additional BIS, hci_bind_bis() obtains the
parent from hci_conn_hash_lookup_big(), which returns a bare pointer.
Unlinking the child then drops the parent's existing hold and can
schedule it for disconnection while it
Bluetooth: ISO: release unused CIS holds after channel attach
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: release unused CIS holds after channel attach
hci_bind_cis() and hci_connect_cis() return one hci_conn hold for the
ISO layer. A new channel association consumes that hold, which is
eventually released by iso_conn_free().
There are two cases where iso_chan_add() does not create an association:
it returns success when the socket is already attached to the same
iso_conn, and it returns -EBUSY when another socket is attached. The
hold returned for the current call is unused in both cases. This occurs
when deferred setup calls iso_connect_cis() again for its
Bluetooth: L2CAP: validate frame length before control and FCS access
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate frame length before control and FCS access
l2cap_data_rcv() unpacks either a two-byte or four-byte control field
without first ensuring that it is present. A short ERTM or streaming-mode
frame can therefore cause an out-of-bounds read.
There is a second short-frame case when CRC16 is enabled. After the
control field is pulled, l2cap_check_fcs() subtracts two from skb->len
without checking it. If fewer than two bytes remain, the subtraction
wraps; skb_trim() leaves the buffer unchanged and the subsequent FCS
load reads past the logical end of the
Bluetooth: mgmt: fix race in read_unconf_index_list()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix race in read_unconf_index_list()
read_unconf_index_list() counts unconfigured controllers before allocating
its response, then checks the device flags again while filling it.
hci_dev_list_lock stabilizes list membership, but it does not serialize the
per-device flags. During asynchronous controller setup, the worker can set
HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller
omitted from the allocation count can then become eligible for the fill
pass, causing an out-of-bounds write to rp->index[].
Allocate space for every device
Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO
The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not
connected as long as deferred setup is enabled:
if (sk->sk_state != BT_CONNECTED &&
!rfcomm_pi(sk)->dlc->defer_setup) {
err = -ENOTCONN;
break;
}
l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk;
dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind()
creates a child socket for an incoming connection on a listening socket
that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The
session, howeve
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix create context out-of-bounds reads
smb2_parse_contexts() validates the complete create-context area but
does not limit each record to its Next field before dispatching it. A
malformed chain can therefore expose bytes beyond the current context to
a handler. The QFid handler also used a full response-structure cast
although it only reads DiskFileId.
The SMB2/SMB3 lease parsers made the same layout assumption: they read
LeaseState and LeaseFlags at canonical offsets rather than at
DataOffset. A valid non-canonical DataOffset could therefore yield
unrelate
smb: client: close handle after create-context parsing failure
In the Linux kernel, the following vulnerability has been resolved:
smb: client: close handle after create-context parsing failure
SMB2_open() accounts a successful CREATE response as a remote open before
parsing its create contexts. If smb2_parse_contexts() rejects malformed
context data, SMB2_open() returns without closing the handle, leaving the
server-side handle open and num_remote_opens elevated.
Close the handle after a post-CREATE context parsing failure so the error
path releases the remote resource and balances the open count.
smb: client: clean up failed cached directory opens
In the Linux kernel, the following vulnerability has been resolved:
smb: client: clean up failed cached directory opens
open_cached_dir() sends CREATE and QUERY_INFO as a compound request. If
the CREATE succeeds but a later command returns an error, the function
must retain the CREATE FID so common cleanup can issue SMB2_close(). It
also must not treat a response error as a valid CREATE.
Validate the CREATE response before using its fields, record the FIDs, and
mark the handle open before handling errors from later compound commands.
Move the -EREMCHG reconnect handling before response validation so a
missing response does not hide the rec
smb: client: use finish_no_open() for non-regular inodes
In the Linux kernel, the following vulnerability has been resolved:
smb: client: use finish_no_open() for non-regular inodes
An O_CREAT open can find an existing symlink or another non-regular
inode. cifs_atomic_open() calls finish_open() on it and attaches a
cifsFileInfo. Symlink inodes have no CIFS release operation, so the
dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also
prevents the VFS from following the symlink.
Track whether cifs_do_create() returned an open server handle. For
non-regular inodes, close the handle if present, remove the pending
open, and call finish_no_open() so the VFS can continue the lookup.
Do n