Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
staging: media: ipu7: fix pm_runtime refcount leak in ipu7_resume()
In the Linux kernel, the following vulnerability has been resolved:
staging: media: ipu7: fix pm_runtime refcount leak in ipu7_resume()
ipu7_resume() calls pm_runtime_get_sync() before resuming the device.
If the runtime PM resume fails, the usage count remains incremented, but
the error path returns without dropping the reference.
Use pm_runtime_resume_and_get() instead, which balances the usage count
on failure and avoids the leak. Keep returning 0 on error, as resume
callbacks should not propagate failures to the PM core, matching the
behaviour of the ipu6 driver.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
thermal/drivers/rcar: Fix error checking in probe()
In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/rcar: Fix error checking in probe()
This code accidentally calls thermal_zone_device_enable() before checking
whether thermal_zone_device_register_with_trips() failed. Move the call
until later to avoid an error pointer dereference of "priv->zone".
The driver works differently depending on if we are using OF thermal or
not. We use thermal_add_hwmon_sysfs() if we are using OF thermal and
call thermal_zone_device_enable() if not. We can share same error check
for if either of these fail.
Moving the thermal_zone_device_enable() call is a bit cleaner as wel
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
usb: gadget: r8a66597: avoid double free of ep0_req in probe error path
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: r8a66597: avoid double free of ep0_req in probe error path
If usb_add_gadget_udc() fails, r8a66597_probe() jumps to err_add_udc
and frees ep0_req, then falls through to clean_up2 where ep0_req is
freed again when it is non-NULL.
Remove the redundant free from err_add_udc and keep the cleanup in
clean_up2 so the request is released exactly once.
Issue found using a prototype static analysis tool
and confirmed by code review.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
udf: Mark LVID buffer as uptodate before marking it dirty
In the Linux kernel, the following vulnerability has been resolved:
udf: Mark LVID buffer as uptodate before marking it dirty
When an I/O error occurs while writing the Logical Volume Integrity
Descriptor (LVID) buffer to the block device, the block layer's completion
handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the
buffer. However, the buffer still contains valid LVID data in memory. If
the filesystem is subsequently remounted read-write or synced,
`udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call
`mark_buffer_dirty()`. This triggers a spurious
`WARN_ON_ONCE(!buffer_uptodate(bh))` warning in
bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux
bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the
bpf_verifier_lock, but publishes the result through a plain store
and re-checks it through a plain lockless load. Nothing orders
the stores initializing the struct btf inside btf_parse_vmlinux()
against the store publishing the pointer: On a weakly ordered
arch, a concurrent first-time caller taking the lockless fast
path could in principle observe the pointer before the parsed
contents are visible. The mutex_unlock() does not help such a
reader given it only
bpf: Fix use-after-free on mm_struct in bpf_find_vma()
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix use-after-free on mm_struct in bpf_find_vma()
bpf_find_vma() reads task->mm and calls mmap_read_trylock(mm) without
holding a reference on the mm. On a foreign task, a concurrent exit_mm()
can free the mm_struct between the lockless read and the trylock,
resulting in a use-after-free. mm_struct is not SLAB_TYPESAFE_BY_RCU.
For the current task, task->mm is stable. For a foreign task, pin the mm
under task->alloc_lock and release it with mmput_async(), mirroring commit
d8e27d2d22b6 ("bpf: fix mm lifecycle in open-coded task_vma iterator").
Use spin_trylock() instea
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
bus: mhi: ep: Fix device refcount leak in the error path of MHI device creation
In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: ep: Fix device refcount leak in the error path of MHI device creation
mhi_ep_create_device() takes one device reference for the UL channel and
another for the DL channel after allocating the transfer device. These
references are normally released by mhi_ep_destroy_device() before the
device itself is removed.
If dev_set_name() or device_add() fails, the error path currently drops
only one reference. The remaining channel references keep the device
from being released and leave the channels associated with a device that
was never registered.
Route both failures t
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
bpf: Reject programs with inlined helpers if JIT is not available
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject programs with inlined helpers if JIT is not available
When an architecture (such as LoongArch, ARM64, and RISC-V) implements
bpf_jit_inlines_helper_call(), the verifier skips rewriting the helper
call offset (insn->imm) in bpf_do_misc_fixups(). This is because the
helper is expected to be inlined by the JIT compiler later. Therefore,
insn->imm remains as the raw helper enum ID.
However, if JIT is disabled at runtime (net.core.bpf_jit_enable=0) or
if JIT compilation fails dynamically (e.g., due to OOM), the program
falls back to the BPF interpreter.
When the in
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
printk: Fix possible console use-after-free
In the Linux kernel, the following vulnerability has been resolved:
printk: Fix possible console use-after-free
When emitting a record via legacy printing, it is possible that a handover
to another legacy printing context occurs. When a context has performed a
handover, the console SRCU read lock is released and the pointer to the
console struct might now be invalid. Therefore, after calling
nbcon_legacy_emit_next_record() or console_emit_next_record(), it is
necessary to check if a handover occurred _before_ further @con usage.
Sashiko pointed out that console_flush_one_record() was not doing this.
In console_flush_one_record(), after em
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
ACPI: RISC-V: Check acpi_get_handle() status in riscv_acpi_add_prt_dep()
In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Check acpi_get_handle() status in riscv_acpi_add_prt_dep()
In riscv_acpi_add_prt_dep(), the acpi_get_handle() call can fail which
would leave link_handle uninitialized.
Fix it by checking the acpi_get_handle() return status and skip the entry
if it fails.
In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Fix riscv_acpi_add_prt_dep() loop handling
The loop in riscv_acpi_add_prt_dep() includes error conditions that are
handled in a dubious - if not outright wrong - way, by continuining the
loop (which skips and misses the entry pointer update to point to the next
entry).
Rewrite the loop as a for loop (that handles the continuation correctly)
and wrap the condition and update statements using helper functions to make
it cleaner.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
platform/x86: dell-privacy: Fix race condition
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-privacy: Fix race condition
Accessing priv->features_present needs to happen with the list mutex
being held, otherwise priv can be freed at any moment.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
platform/x86: dell-wmi-base: Fix resource leak on module load failure
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix resource leak on module load failure
We need to properly clean up the SMBIOS request and the privacy driver
when the module load fails.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
platform/x86: dell-wmi-base: Fix handling of ultra performance key
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix handling of ultra performance key
The commit message of commit 5fbd827eb9c2 ("platform/x86: dell-wmi: Recognise or support new switches")
states that the ultra performance key contains additional data
after the type and code fields. The event data passed to
dell_wmi_process_key() is already parsed, so "buffer" already
starts after those two fields.
Use the correct index for accessing the first data field to avoid
a potential buffer overread.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
platform/x86: lg-laptop: Fix LED resource handling
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lg-laptop: Fix LED resource handling
The event notification callback might access kbd_backlight even
when it was not successfully registered with the LED subsystem.
The same happens inside acpi_remove(), where the LED devices are
unregistered unconditionally.
Fix this by tracking the availability of the kbd_backlight LED
device and use devm_led_classdev_register() to let devres take
care of unregistering the LED devices during removal. For this
the parent device of the LED devices is changed to the native
platform device.
bpf: Drop scalar id on sign-extending narrowing stack fills
In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if <zext-reg> == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at ru
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
remoteproc: qcom_q6v5_adsp: Fix reference leak for device node
In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_q6v5_adsp: Fix reference leak for device node
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In adsp_map_carveout, it does not release the reference.
bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max
check_kfunc_args() detects a kfunc argument named rdonly_buf_size or
rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64,
and does not bound it. check_kfunc_call() later copies that value into
the returned register's mem_size field:
meta->r0_size = reg->var_off.value;
...
regs[BPF_REG_0].mem_size = meta.r0_size;
regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set
gets truncated instead of causing a load-time rejection, so the verifier
records a PTR_TO_MEM regis
serial: qcom-geni: do not advance stale DMA completions
In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: do not advance stale DMA completions
The qcom GENI serial DMA TX completion path advances the transmit fifo by
the number of bytes recorded in port->tx_remaining.
If uart_flush_buffer() runs after the hardware has completed a DMA
transfer but before the DMA completion interrupt has been handled, the
serial core resets the transmit fifo while port->tx_remaining still
describes the old DMA transfer.
A previous fix avoided advancing an empty fifo by checking that the fifo
length is at least tx_remaining. That still does not distinguish the old
DMA payload
usb: gadget: uac: validate rate list length before storing
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uac: validate rate list length before storing
UAC1 and UAC2 configfs rate-list attributes parse a comma-separated
list of sampling rates and store each parsed value in fixed-size arrays.
The arrays have UAC_MAX_RATES entries, but the store paths do not check
that the input contains at most that many tokens before writing through
opts->name##s[i++].
Writing more than ten rates therefore writes past the end of the
p_srates[] or c_srates[] array in struct f_uac1_opts or struct
f_uac2_opts.
With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the
UA