Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
acpi/apei/ghes: Use raw_spinlock_t for CXL CPER work locks
In the Linux kernel, the following vulnerability has been resolved:
acpi/apei/ghes: Use raw_spinlock_t for CXL CPER work locks
The CXL CPER work registration and unregistration helpers acquire
cxl_cper_work_lock and cxl_cper_prot_err_work_lock with a spinlock
guard(), which leaves local interrupts enabled. The corresponding post
paths (cxl_cper_post_event(), cxl_cper_post_prot_err()) execute in hard
IRQ context (they are called from the GHES error notification path) and
acquire the same locks with an irqsave guard().
If a CPU is holding one of these locks via a spinlock guard() when a GHES
interrupt arrives on the same CPU, the IRQ handler
ACPI: APEI: GHES: fix ARM section length accounting after header
In the Linux kernel, the following vulnerability has been resolved:
ACPI: APEI: GHES: fix ARM section length accounting after header
In ghes_handle_arm_hw_error(), after skipping the cper_sec_proc_arm
header with (err + 1), the remaining length was reduced by sizeof(err)
(pointer size) instead of sizeof(*err) (structure size).
That overestimates the bytes left for cper_arm_err_info records and can
let the parser read past the CPER section when err_info_num is large
enough relative to error_data_length.
Use sizeof(*err) so the length accounting matches the pointer advance
and the earlier sizeof(*err) size check.
ACPI: pfr_update: fix stack buffer overflow in query_capability()
In the Linux kernel, the following vulnerability has been resolved:
ACPI: pfr_update: fix stack buffer overflow in query_capability()
query_capability() copies four ACPI buffer objects returned by the
firmware _DSM into fixed-size u8[16] fields in struct
pfru_update_cap_info using memcpy with the firmware-supplied length:
memcpy(&cap_hdr->code_type,
elements[CAP_CODE_TYPE_IDX].buffer.pointer,
elements[CAP_CODE_TYPE_IDX].buffer.length);
The same pattern repeats for drv_type, platform_id, and oem_id.
If the firmware returns buffer.length > 16 for any of these fields,
memcpy writes past the destination array.
struct pfru
ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes
In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes
ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the
UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM
descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte
ata_scsi_rbuf staging buffer, and the number of bytes copied is compared
against the logical sector size by the caller:
size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
if (size != len) /* len == sdp->sector_size */
goto invalid_param_len;
ata_format_dsm_trim_descr() clamps
auxdisplay: charlcd: cancel backlight work on registration failure
In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: charlcd: cancel backlight work on registration failure
With CONFIG_CHARLCD_BL_FLASH, charlcd_init() schedules bl_work before
charlcd_register() calls misc_register(). If registration fails, the
caller frees the charlcd object while delayed work still contains its
address.
Add charlcd_deinit() to cancel the delayed work and turn the backlight
off. Use it for both registration rollback and normal unregistration.
block: validate user space vectors during extraction
In the Linux kernel, the following vulnerability has been resolved:
block: validate user space vectors during extraction
The bio-based drivers don't necessarily check the alignment split, and
stacking block drivers don't always handle a misalignment detected after
submitting the bio. Validate user vectors against the device's
dma_alignment as the bio is built from the iov_iter, rejecting
misaligned early with -EINVAL.
Bluetooth: eir: Fix OOB read in eir_get_service_data()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix OOB read in eir_get_service_data()
eir_get_service_data() walks the advertising data for a Service Data
field with a matching UUID. On a mismatch it advances:
eir += dlen;
eir_len -= dlen;
eir_get_data() reports dlen as the field's data length, but the field
spans dlen + 2 bytes once its length and type bytes count, and more
when non-Service-Data fields were skipped to reach it. The pointer
lands correctly on the next field. eir_len does not, and the shortfall
compounds across fields until eir_get_data() reads the length and type
bytes of a
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
bnx2x: fix double free in bnx2x_init_firmware() error path
In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix double free in bnx2x_init_firmware() error path
bnx2x_init_firmware() frees bp->init_ops, bp->init_data and
bp->init_ops_offsets in its error path without setting them to NULL.
The cleanup function bnx2x_release_firmware() frees the same three
pointers unconditionally, so if init_firmware fails and
release_firmware is later called (e.g. from __bnx2x_remove or through
the function state machine), all three are freed a second time.
Set each pointer to NULL after kfree() in the error path so that the
subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-o
bpf, x86: Fix per-CPU address resolution into an extended register
In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: Fix per-CPU address resolution into an extended register
The destination of the per-CPU address MOV is encoded in ModRM.reg,
which is extended by REX.R, but the REX prefix is built with
add_1mod(), which sets REX.B. REX.B extends ModRM.rm and SIB.base, and
this instruction addresses memory as disp32 with no base, so the bit
has no effect at all and the high register bit is simply lost.
Every is_ereg() destination therefore resolves to the wrong register,
picking whichever one shares the low three bits:
R5 -> RAX R7 -> RBP R8 -> RSI R9 -> RDI
With BPF
In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in __bpf_get_stack
get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and
releases its recursion slot via put_callchain_entry() before returning,
so nothing keeps the entry reserved while __bpf_get_stack() consumes
it below.
A preemptible BPF program (e.g. a non-sleepable raw tracepoint program
on a PREEMPT kernel, which runs under migrate_disable() but not
preempt_disable()) can be scheduled out between obtaining the entry
and the copy. Another task scheduled on the same CPU then reuses the
same per-CPU buffer and overwrites trace->
bpf: Harden bloom filter sizing and indexing on 32-bit kernels
In the Linux kernel, the following vulnerability has been resolved:
bpf: Harden bloom filter sizing and indexing on 32-bit kernels
bloom_map_alloc() has two 32-bit-specific problems when the computed
bitmap reaches the U32_MAX fallback case.
First, BITS_TO_BYTES(U32_MAX) is evaluated with 32-bit arithmetic. The
addition performed by DIV_ROUND_UP wraps, so the map allocates only the
fixed-size bloom filter object while keeping bitset_mask == U32_MAX.
Subsequent updates can then write past the allocated object.
Second, fixing only the allocation size is not sufficient. The bloom hash
is a u32, but set_bit() takes a signed long bit number an
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
dm-io: clone the source bio instead of copying its biovec
In the Linux kernel, the following vulnerability has been resolved:
dm-io: clone the source bio instead of copying its biovec
For DM_IO_BIO requests, do_region() built each destination bio by walking
the source bio's biovec and re-adding the pages one at a time, tracking
the remaining transfer in sectors. The vector lengths are byte granular
and need not be sector aligned (e.g. a misaligned O_DIRECT buffer split
across pages), so the sector-based accounting could lose a sub-sector
fragment: to_sector() truncated the remainder and the outer loop spun
forever submitting empty bios, hanging the I/O.
There is no need to rebuild the biovec at a
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
dm-io: report non-retryable errors separatedly
In the Linux kernel, the following vulnerability has been resolved:
dm-io: report non-retryable errors separatedly
The error codes BLK_STS_NOTSUPP and BLK_STS_INVAL should not cause leg
failure on dm-raid1. This patch changes the interface to dm-io, so that
it reports two error bitmaps - error_bits and unsup_bits. The unsup_bit
bitmap tracks BLK_STS_NOTSUPP or BLK_STS_INVAL errors, the error_bits
bitmap tracks all the other errors.
dm-raid1 is changed so that it won't fail a leg if it receives an error
in the unsup_bits bitmap.
This patch (with 62dc37a819a5) fixes misbehavior if the user uses
unaligned bio vectors on dm-raid1.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
dm-era: fix shadowed superblock leak on take-snap failure
In the Linux kernel, the following vulnerability has been resolved:
dm-era: fix shadowed superblock leak on take-snap failure
metadata_take_snap() bumps the live superblock refcount and then
dm_tm_shadow_block() allocates a new block for the metadata snapshot.
If the subsequent dm_sm_inc_block() of writeset_tree_root or
era_array_root fails, the function only unlocks the clone and
returns. The newly allocated shadow block is never returned to the
metadata space map, so each failed take-snap permanently leaks one
metadata block.
Free the clone with dm_sm_dec_block() on those error paths, matching
the final step of metadata_drop_snap().
Nicht bewertetEPSS 0,23%Keine Korrektur veröffentlicht
dm raid1: reserve space for NUL-terminator in build_constructor_string()
In the Linux kernel, the following vulnerability has been resolved:
dm raid1: reserve space for NUL-terminator in build_constructor_string()
Reserve space for the termination NUL after the maximum 20 decimal
digits of a long long value to avoid buffer overflow in sprintf().
In the Linux kernel, the following vulnerability has been resolved:
dm array: validate array block headers on read
array_block_check() validates blocknr and csum and nothing else, while
node_check(), next to it, has bounded the structural fields since both
were written. dm_array_cursor_next() takes its loop bound from the
on-disk nr_entries and element_at() is unguarded pointer arithmetic, so
a count larger than the block holds keeps the cursor in one block while
the index grows past it and the read walks off the dm-bufio buffer --
dm_cache_load_mappings() drives it once per cache block at activation.
Check the header against itself: rejec
dm array: reject an array block whose value size is not the caller's
In the Linux kernel, the following vulnerability has been resolved:
dm array: reject an array block whose value size is not the caller's
array_block_check() can only compare the header against itself, so a block
with value_size 4 and max_entries 1018 is internally consistent and passes.
dm-cache keeps two arrays -- mappings at 8 bytes and hints at 4 -- and the
roots for both live in the superblock. Point the mappings root at a hint
block and __load_mappings() walks it through an info whose value size is 8,
so element_at() strides 8 bytes over 4-byte entries and reaches offset 8160
of a 4096-byte block.
get_ablock() and __shadow_ablock() ar
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
cpufreq: apple-soc: Fix OPP table cleanup
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: apple-soc: Fix OPP table cleanup
apple_soc_cpufreq_init() adds OPP tables from firmware, but
some failure paths do not remove them. The driver also uses
dev_pm_opp_remove_all_dynamic(), which is not the right cleanup
helper for OPP tables loaded from firmware.
Use the cpumask OPP helper after the policy CPU mask has been
populated. Pair it with the matching cpumask remove helper on
failure paths and in apple_soc_cpufreq_exit(). This also removes
the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask
helper loads the DT OPP tables for all CPUs in the polic
cxl/features: bound fwctl command payload to the input buffer
In the Linux kernel, the following vulnerability has been resolved:
cxl/features: bound fwctl command payload to the input buffer
fwctl_cmd_rpc() copies cmd->in_len bytes into inbuf = kvzalloc(cmd->in_len)
and passes inbuf and in_len to ->fw_rpc(). The CXL callback cxlctl_fw_rpc()
ignores in_len and never checks the user-controlled op_size against it.
cxlctl_set_feature() bounds op_size only from below
(op_size <= sizeof(feat_in->hdr)) and then reads op_size - sizeof(hdr)
bytes from feat_in->feat_data via cxl_set_feature(). With a small in_len
and a large op_size the first memcpy() already reads past the
kvzalloc(in_len) buffer; the out-of
In the Linux kernel, the following vulnerability has been resolved:
cxl/mce: Make the MCE notifier per-region
Flavien Solt reported lifetime issues with the CXL MCE notifier, which
can lead to NULL dereferences and use-after-free in the MCE handler.
The notifier was registered per memory device and stored in 'struct
cxl_memdev_state', even though it only needs the region state (the
region's SPA range and its extended linear cache size).
Instead of keeping the memory device and endpoint alive, the correct fix
is to move the notifier into 'struct cxl_region' and register it from
cxl_region_probe() as it should be a per-region notifier. Setup