Sicherheitslücken in linux-azure · Seite 169

drm/amdgpu: fix bo->pin leaking in amdgpu_bo_create_reserved

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix bo->pin leaking in amdgpu_bo_create_reserved amdgpu_bo_create_reserved() only allocates a new BO when *bo_ptr (struct amdgpu_bo **bo_ptr as input parameter) is NULL, it simply skips creation when *bo_ptr is non-NULL. But it unconditionally reserves, pins, gart allocates and maps the BO afterwards. When the same non-NULL BO pointer is passed in again, for example firmware buffers that live in adev and are re-loaded on every resume / cp_resume / start under AMDGPU_FW_LOAD_DIRECT, amdgpu_bo_pin() just increases pin_count unconditionally, however the matching t

• Auf 6.8.0-1071.79 aktualisieren

drm/vc4: Shut down BO cache timer before teardown

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Shut down BO cache timer before teardown The BO cache timer callback schedules time_work, and time_work can rearm the timer through vc4_bo_cache_free_old(). vc4_bo_cache_destroy() deletes the timer and then cancels the work, which does not break that cycle: the work being cancelled can rearm the timer, and the timer then queues work again after teardown. Use timer_shutdown_sync() instead, so the timer cannot be rearmed and the cycle ends with cancel_work_sync().

media: airspy: Return queued buffers on start_streaming() failure

In the Linux kernel, the following vulnerability has been resolved: media: airspy: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. airspy_start_streaming() returned -ENODEV early when the USB device had been disconnected (s->udev == NULL) without returning any buffers that buf_queue() had already accepted. Take v4l2_lock first and jump to the existing err_clea

• Auf 6.8.0-1071.79 aktualisieren

media: cedrus: skip invalid H.264 reference list entries

In the Linux kernel, the following vulnerability has been resolved: media: cedrus: skip invalid H.264 reference list entries Cedrus consumes H.264 ref_pic_list0/ref_pic_list1 entries from the stateless slice control and later uses their indices to look up decode->dpb[] in _cedrus_write_ref_list(). Rejecting such controls in cedrus_try_ctrl() would break existing userspace, since stateless H.264 reference lists may legitimately carry out-of-range indices for missing references. Instead, guard the actual DPB lookup in Cedrus and skip entries whose indices do not fit the fixed V4L2_H264_NUM_DPB_ENTRIES array. This keeps the fix local to the

• Auf 6.8.0-1071.79 aktualisieren

media: chips-media: wave5: Move src_buf Removal to finish_encode

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Move src_buf Removal to finish_encode During encoder processing, there is a case where the IRQ response could return the buffer back to userspace via v4l2_m2m_buf_done call. In this time, userspace could queue up this same buffer before start_encode removes the index from the ready queue. This would then lead to a case where the buffer in the ready queue could be a self loop due to the WRITE_ONCE(prev->next, new) call in __list_add. When __list_del is finally called, the loop is already made so nothing points back to ready queue list head and poi

• Auf 6.8.0-1071.79 aktualisieren

media: cx231xx: fix devres lifetime

In the Linux kernel, the following vulnerability has been resolved: media: cx231xx: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the driver state lifetime so that it is released on driver unbind.

• Auf 6.8.0-1071.79 aktualisieren

media: cx23885: add ioremap return check and cleanup

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: add ioremap return check and cleanup Add a check for the return value of pci_ioremap_bar() in cx23885_dev_setup(). If ioremap for BAR0 fails, release the already allocated PCI memory region, decrement the device count, and return -ENODEV. This prevents a potential null pointer dereference and ensures proper cleanup on memory mapping failure.

• Auf 6.8.0-1071.79 aktualisieren

media: i2c: alvium: fix critical pointer access in alvium_ctrl_init

In the Linux kernel, the following vulnerability has been resolved: media: i2c: alvium: fix critical pointer access in alvium_ctrl_init The current implementation of alvium_ctrl_init creates several controls in function alvium_ctrl_init and uses the returned pointer without check. That can cause write access over NULL-pointer for several controls. The reworked code checks the pointers before adding flags.

• Auf 6.8.0-1071.79 aktualisieren

media: meson: vdec: Fix memory leak in error path of vdec_open

In the Linux kernel, the following vulnerability has been resolved: media: meson: vdec: Fix memory leak in error path of vdec_open The vdec_open() function previously jumped directly to err_m2m_release when vdec_init_ctrls() failed, skipping release of the m2m context. This caused a resource leak. Fix it by introducing a proper err_m2m_ctx_release label that calls v4l2_m2m_ctx_release(sess->m2m_ctx) before releasing the m2m device. This was identified via kmemleak: unreferenced object 0xffff0000205d6878 (size 8): comm "v4l_id", pid 5289, jiffies 4294938580 hex dump (first 8 bytes): 40 d2 49 18 00 00 ff ff

• Auf 6.8.0-1071.79 aktualisieren

media: msi2500: Return queued buffers on start_streaming() failure

In the Linux kernel, the following vulnerability has been resolved: media: msi2500: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. msi2500_start_streaming() had five error paths that all hit this trap and were further tangled by ret-overwriting between calls: - -ENODEV when the USB device was already disconnected - -ERESTARTSYS when mutex_lock_interruptib

• Auf 6.8.0-1071.79 aktualisieren

media: nuvoton: npcm-video: fix memory leaks in probe and remove

In the Linux kernel, the following vulnerability has been resolved: media: nuvoton: npcm-video: fix memory leaks in probe and remove npcm_video_probe() allocates the npcm_video structure with kzalloc_obj() but never frees it on any probe error path or in npcm_video_remove(), leaking the allocation on every failed probe and every normal unbind. Additionally, when npcm_video_setup_video() fails, the reserved memory association established by of_reserved_mem_device_init() in npcm_video_init() is not released, leaking the rmem_assigned_device entry on the global list. Fix both by adding kfree(video) to all probe error paths and to npcm_video_

• Auf 6.8.0-1071.79 aktualisieren

media: nxp: imx8-isi: Add missing v4l2_subdev_cleanup() in crossbar and pipe

In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Add missing v4l2_subdev_cleanup() in crossbar and pipe Both mxc_isi_crossbar_init() and mxc_isi_pipe_init() call v4l2_subdev_init_finalize() which allocates the subdev active state, but neither mxc_isi_crossbar_cleanup() nor mxc_isi_pipe_cleanup() calls v4l2_subdev_cleanup() to free it. This causes a memory leak on every rmmod, reported by kmemleak: unreferenced object 0xffff0000d06fc800 (size 192): comm "(udev-worker)", pid 254, jiffies 4294913455 backtrace (crc 36eeae58): kmemleak_alloc+0x34/0x40 __kvmalloc_node_noprof+0x5f8/0

• Auf 6.8.0-1071.79 aktualisieren

media: nxp: imx8-isi: Fix potential out-of-bounds issues

In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix potential out-of-bounds issues The maximum downscaling factor supported by ISI can be up to 16. Add minimum value constraint before applying the setting to hardware. Otherwise, the process will not respond even when Ctrl+C is executed.

• Auf 6.8.0-1071.79 aktualisieren

media: pci: dm1105: Free allocated workqueue

In the Linux kernel, the following vulnerability has been resolved: media: pci: dm1105: Free allocated workqueue Destroy allocated workqueue in remove() callback to free its resources, thus fixing memory leak.

• Auf 6.8.0-1071.79 aktualisieren

media: pwc: Drain fill_buf on start_streaming() failure

In the Linux kernel, the following vulnerability has been resolved: media: pwc: Drain fill_buf on start_streaming() failure pwc_isoc_init() submits its isochronous URBs with usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is submitted, its completion handler pwc_isoc_handler() can run on another CPU before the loop finishes: start_streaming() pwc_isoc_init() usb_submit_urb(urbs[0], GFP_KERNEL) pwc_isoc_handler(urbs[0]) pdev->fill_buf = pwc_get_next_fill_buf(pdev) usb_submit_urb(urbs[i>0], ..) -> fails

• Auf 6.8.0-1071.79 aktualisieren

media: pwc: Return queued buffers on start_streaming() failure

In the Linux kernel, the following vulnerability has been resolved: media: pwc: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. pwc's start_streaming() had two early returns that hit this trap: -ENODEV when the USB device was already disconnected, and -ERESTARTSYS when mutex_lock_interruptible() was interrupted by a signal. Call the existing pwc_cleanup_queued

• Auf 6.8.0-1071.79 aktualisieren

media: radio-si476x: Unregister v4l2_device on probe failure

In the Linux kernel, the following vulnerability has been resolved: media: radio-si476x: Unregister v4l2_device on probe failure si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2 controls and before registering the video device. If any of those later steps fails, probe returns through the exit label after freeing only the control handler. A failed probe does not call si476x_radio_remove(), so the v4l2_device_unregister() there is not reached. This leaves the parent device reference taken by v4l2_device_register() behind on the error path. Unregister the V4L2 device in the probe error path after freeing the controls.

• Auf 6.8.0-1071.79 aktualisieren

media: rtl2832: fix use-after-free in rtl2832_remove()

In the Linux kernel, the following vulnerability has been resolved: media: rtl2832: fix use-after-free in rtl2832_remove() cancel_delayed_work_sync() is called before i2c_mux_del_adapters() in rtl2832_remove(). While the cancel waits for any running instance of i2c_gate_work to finish, it does not prevent the timer from being rescheduled by a concurrent thread. During probe, the r820t_attach() call attempts I2C transfers through the mux adapter. These transfers go through i2c_mux_master_xfer(), which calls rtl2832_deselect() after the transfer completes, rescheduling i2c_gate_work via schedule_delayed_work(). If this transfer is still in f

• Auf 6.8.0-1071.79 aktualisieren

media: rtl2832_sdr: Return queued buffers on start_streaming() failure

In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. rtl2832_sdr_start_streaming() had multiple error paths that hit this trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six `goto err` paths covering subdev s_power, tuner setup, ADC setup, stream-buffer allocation, u

• Auf 6.8.0-1071.79 aktualisieren

media: saa7134: Fix a possible memory leak in saa7134_video_init1

In the Linux kernel, the following vulnerability has been resolved: media: saa7134: Fix a possible memory leak in saa7134_video_init1 In saa7134_video_init1(), the return value of the first saa7134_pgtable_alloc() is not checked. If it fails, the function continues as if successful, leaving the driver with an invalid page table. Additionally, if vb2_queue_init() for the VBI queue fails after the video queue page table has been allocated, the allocated memory is not freed before returning. The second saa7134_pgtable_alloc() also lacks a return value check. Errors occur during device probing before the device is fully registered, the normal c

• Auf 6.8.0-1071.79 aktualisieren