smb: client: avoid leaking refcount in cifs_queue_oplock_break()
In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount in cifs_queue_oplock_break()
cifs_queue_oplock_break() unconditionally takes a reference on the
target file before queueing cifs_oplock_break(). Only that work item
decreases the reference counter again.
If another oplock break arrives while that work is still queued,
queue_work() will return false and not queue this second work item. As a
result, we will never reach the point to drop the file reference again
and are leaking this reference. This can be triggered when interacting
with a slow-responding server.
As a result, later unmount
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
smb: client: avoid leaking refcount when cifs_sb_tlink() fails
In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount when cifs_sb_tlink() fails
cifs_oplock_break() takes over the reference that
cifs_queue_oplock_break() acquired when it queued the work, and drops it
with _cifsFileInfo_put() once the break has been processed.
Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which
point cifs_oplock_break() returns without putting the file reference,
mirroring the reference leak we already fixed in the companion patch to
cifs_queue_oplock_break().
This would trigger a crash due to busy inodes on the next unmount:
BUG: Dentry ... still
smb: client: fix heap overflow in DACL owner/group rewrite
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix heap overflow in DACL owner/group rewrite
When id_mode_to_cifs_acl rewrites an existing DACL, it allocates a
buffer sized according to the on-disk DACL length reported by
dacl_ptr->size. However, replace_sids_and_copy_aces may rewrite each
ACE with a new owner/group SID obtained from the cifs.idmap upcall.
Those SIDs can have up to SID_MAX_SUB_AUTHORITIES (15) sub-authorities,
making each ACE up to 76 bytes (sizeof(struct smb_ace)).
If the original DACL contains short SIDs (e.g., 1 sub-authority) while
the replacement SIDs are long, the rewritten ACEs over
smb: client: avoid using uninitialized SIDs in cifs_posix_to_fattr()
In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid using uninitialized SIDs in cifs_posix_to_fattr()
cifs_posix_to_fattr() ignores the return value of posix_info_parse().
When a malformed POSIX directory entry is encountered (e.g. invalid
SID lengths from an untrusted server), posix_info_parse() returns -1
without populating the 'parsed' struct. The uninitialized stack
memory in parsed.owner and parsed.group is then passed to
sid_to_id(), which processes the garbage bytes and passes them to
request_key() to construct a SID string, potentially leaking kernel
stack contents to the userspace idmap daemon.
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
xfs: initialise error in xfs_defer_finish_one()
In the Linux kernel, the following vulnerability has been resolved:
xfs: initialise error in xfs_defer_finish_one()
xfs_defer_finish_one() declares error without an initialiser and only
assigns it inside the loop over dfp->dfp_work. When that list is empty
the loop body never runs, control falls through to the "Done with the
dfp, free it" path, and the function returns an indeterminate value.
An item-less pending item reaches this through xfs_defer_add_barrier(),
which xfs_reap_ag_blocks() uses on any CONFIG_XFS_ONLINE_REPAIR kernel.
xfs_defer_finish_noroll() treats any non-EAGAIN return as fatal, so a
non-zero stack value turns a success
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
xfs: don't leak new_bp if xfs_btree_bload_drop_buf fails
In the Linux kernel, the following vulnerability has been resolved:
xfs: don't leak new_bp if xfs_btree_bload_drop_buf fails
LOLLM observes that in xfs_btree_bload_prep_block,
xfs_btree_bload_drop_buf can hit an IO error if writing the delwri
buffer list to disk fails. In this case, we fail to release new_bp,
which means we lose a locked buffer. Fix that.
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
xfs: bail out on bitmap errors in xrep_agfl_fill
In the Linux kernel, the following vulnerability has been resolved:
xfs: bail out on bitmap errors in xrep_agfl_fill
LOLLM also points out that the xagb_bitmap_set call in xrep_agfl_fill
can fail, but we don't check the result of xagb_bitmap_walk, so we
silently drop the error and proceed with inconsistent incore data.
That shouldn't be allowed.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
wifi: ath9k_htc: don't store usb_device_id
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: don't store usb_device_id
usb_device_id is not guaranteed to live longer than probe due to presence
of dynamic ID. All information apart from driver_data can be easily
retrieved from usb_device, so just store driver_data.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
net: usb: pegasus: don't rely on id table pointer arithmetic
In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. Instead of
keeping a side table for additional information, use driver_info field of
the usb_device_id.
The dynamic ID parsing code needs to be updated for this; convert it to
just write to the reserved entry for dynamic ID and remove the weird loop.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
usb: xusbatm: don't rely on id table pointer arithmetic
In the Linux kernel, the following vulnerability has been resolved:
usb: xusbatm: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. xusbatm
initialize the USB device IDs dynamically so it can just use driver_info
too.
Even with conversion, xusbatm still cannot support dynamic IDs, so also set
no_dynamic_id.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking
qla25xx_free_req_que() and qla25xx_free_rsp_que() have two pre-existing
bugs exposed on the error path of qla25xx_create_{req,rsp}_que():
1. When dma_alloc_coherent() fails during queue creation, the error
path calls the free function with req->ring / rsp->ring still NULL
(from kzalloc). The unconditional dma_free_coherent() with a NULL
cpu_addr is undefined behavior and can panic.
2. The free functions clear req_qid_map / rsp_qid_map under vport_lock,
but the create functions protect th
scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown
The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules
qla_do_work() via queue_work(ha->wq, &qpair->q_work). qla_do_work()
dereferences the qpair (vha, rsp) and takes qpair->qp_lock.
During teardown, qla2xxx_delete_qpair() deletes the response queue, which
calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and
the qpair. free_irq() waits for running hardirq handlers but does not
cancel work already placed on ha->wq. A still-pending q_work then runs
qla_do_work() against the freed q
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size
The VP control IOCB selects its target virtual port by setting one bit
in vp_idx_map, a fixed 16-byte (128-bit) array in both
vp_ctrl_entry_24xx and vp_ctrl_entry_24xx_ext. qla25xx_ctrlvp_iocb()
computes map = (vp_index - 1) / 8 and writes vce->vp_idx_map[map]
without checking that map stays within the array.
max_npiv_vports is taken from firmware and only sanitized to a
MIN_MULTI_ID_FABRIC-aligned boundary, so it can legitimately be 191 or
255, and qla24xx_control_vp() only rejects vp_index >= max_npiv_vports.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
f2fs: accurately adjust free_sections during free_segment_range
In the Linux kernel, the following vulnerability has been resolved:
f2fs: accurately adjust free_sections during free_segment_range
In free_segment_range(), MAIN_SECS(sbi) is temporarily reduced by `secs`
to restrict block allocation to the safe remaining main area while valid
blocks in the truncated range are evacuated by GC.
However, FREE_I(sbi)->free_sections tracks the total number of free
sections across the whole filesystem. If any sections within the
truncated range were already free upon entering free_segment_range(),
failing to deduct them from free_sections causes the filesystem to
overestimate available free sections in the acti
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path
When qla2x00_mem_alloc() fails, qla2x00_probe_one() jumps to
probe_hw_failed and calls qla2x00_mem_free(). Several error labels in
qla2x00_mem_alloc() freed adapter members (elsrej.c, purex_dma_pool,
flt, sfp_data, loop_id_map, async_pd, sf_init_cb, ex_init_cb, npiv_info)
but left the pointers dangling. qla2x00_mem_free() then freed them a
second time. Worse, for the dma_pool members it issued
dma_pool_free(ha->s_dma_pool, ...) after s_dma_pool had already been
destroyed and set to NULL at fail_s_dma_p
scsi: qla2xxx: Skip vport under deletion in report ID acquisition
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Skip vport under deletion in report ID acquisition
qla24xx_report_id_acquisition() format-1 handling walks ha->vp_list under
vport_slock, takes a vref_count on the matching vport and calls
qla_update_host_map() to register its port id.
A vport teardown via qla24xx_vport_delete() sets VPORT_DELETE, then
qla24xx_disable_vp() removes the vport from the host_map btree and zeroes
vha->d_id (RESET_AL_PA). The vport is only unlinked from vp_list later,
in qla24xx_deallocate_vp_id(), which clears vp_map[idx] (RESET_VP_IDX)
but does not touch host_map. In the window
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature
qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll
rsp_q->ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide
whether the next continuation IOCB has arrived, spinning on cpu_relax()
without advancing the ring or decrementing the entry count while it has
not. response_t::signature lives at byte offset 60, but a continuation
IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame
payload at that offset (data[56..59]). A received frame whose payload
bytes happen to equal
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
The FC BSG transport allocates job->request via memdup_user() using the
exact user-supplied request_len. For FC_BSG_HST_VENDOR,
fc_bsg_host_dispatch() only guarantees request_len covers msgcode and
vendor_id; it does not account for the vendor_cmd[] flexible array.
qla2xxx then reads the command selector vendor_cmd[0] and, in several
sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor
command area without verifying request_len. A caller holding
CAP_SYS_RAWIO can submit a short request whos
scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error
qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into
fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked
when the NVMe transport calls back to transmit the LS response. On the
error (out:) path the function frees uctx with kfree() but never removes
it from the list. This leaves a freed node in fcport->unsol_ctx_head: the
next list_add_tail() for that fcport writes through the freed node, and a
subsequent list_del() can corrupt the list or panic.
Unlink uctx with list_del() be
scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock
The fcport->unsol_ctx_head list is modified from several contexts without
a common lock. Entries are added in qla2xxx_process_purls_iocb() from the
response queue ISR (under the qpair qp_lock), while they are removed from
qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp()
(NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB
completion). The qpair qp_lock cannot serialize this per-fcport list since
multiqueue adapters add entries through different qpairs, so a concurrent