p PatchFirst

PatchFirst · Aktuelle Sicherheitslücken

Sicherheitslücken in linux-gkeop · Seite 79

In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux-gkeop: 756. Davon im KEV-Katalog: 0.

Sicherheitslücken filtern
Filter zurücksetzen

Sicherheitslücken: 9375

  1. CVE-2026-90185

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    null_blk: serialize configfs attribute stores with the lock

    In the Linux kernel, the following vulnerability has been resolved: null_blk: serialize configfs attribute stores with the lock The NULLB_DEVICE_ATTR _store takes no lock: apply_fn attributes (submit_queues, poll_queues) get dev->NAME written again after apply_fn returns, outside its lock; APPLY=NULL attributes are entirely lockless. configfs only serializes stores per-open-file, so concurrent stores on separate fds race. For apply_fn attributes, once one store's apply_fn has reconfigured the hardware, a second (losing) store can still overwrite dev->NAME afterwards. This leaves dev->submit_queues out of sync with the live queue count, whi

    Veröffentlicht Aktualisiert
  2. CVE-2026-90184

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    null_blk: serialize configfs attribute updates with device setup

    In the Linux kernel, the following vulnerability has been resolved: null_blk: serialize configfs attribute updates with device setup The attribute store methods generated with NULLB_DEVICE_ATTR() refuse to change the configuration of a live device by testing NULLB_DEV_FL_CONFIGURED, but that flag is only set by nullb_device_power_store() after null_add_dev() has returned, and the store methods take no lock at all. configfs only serializes writes to the same open file (buffer->mutex), so a write to any attribute can run concurrently with null_add_dev() and change the device configuration while it is being used. null_add_dev() reads the conf

    Veröffentlicht Aktualisiert
  3. CVE-2026-90183

    Mittel · CVSS 6.8EPSS 0,21%Keine Korrektur veröffentlicht

    blk-iolatency: clear delay state when freeing policy data

    In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: clear delay state when freeing policy data io.latency can throttle a group which has no latency target of its own. When a sibling misses its target, check_scale_change() scales down its peers, and a peer that reaches queue depth one gets blkcg_use_delay() called on it on every further scale-down, even with min_lat_nsec == 0. iolatency_pd_offline() resets the target through iolatency_set_min_lat_nsec(), which clears the delay only on a nonzero to zero transition, so it never clears such a peer. Freeing the policy data then leaves blkg->use_delay set and blkc

    Veröffentlicht Aktualisiert
  4. CVE-2026-90182

    Niedrig · CVSS 2EPSS 0,21%Keine Korrektur veröffentlicht

    blk-iocost: clear delay state when freeing policy data

    In the Linux kernel, the following vulnerability has been resolved: blk-iocost: clear delay state when freeing policy data iocg_kick_delay() turns sufficiently large debt into an explicit block-cgroup delay with blkcg_set_delay(), setting blkg->use_delay to -1 and incrementing blkcg->congestion_count. Clearing it again depends on iocg_kick_delay() running from the period timer, the waitq timer or the issue path. ioc_pd_free() removes the iocg from active_iocgs and cancels its waitq timer, and no further bios can arrive, so once it has run nothing is left which can reduce the debt and clear the delay. The blkcg stays marked congested for

    Veröffentlicht Aktualisiert
  5. CVE-2026-90180

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    block: mtip32xx: synchronize ioctls with device removal

    In the Linux kernel, the following vulnerability has been resolved: block: mtip32xx: synchronize ioctls with device removal The ioctl handlers only test REMOVE_PENDING before entering mtip_hw_ioctl(). Removal can set that bit immediately afterwards and free dd->port in mtip_hw_exit() while an ioctl still dereferences it. An already open block device can reach the handlers while del_gendisk() is in progress. Serialize both native and compat ioctls with removal. Set REMOVE_PENDING before taking the mutex so new callers fail after an in-flight ioctl has drained, and hold the mutex until the port has been torn down.

    Veröffentlicht Aktualisiert
  6. CVE-2026-90178

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    hwmon: (coretemp) Fix core_data leak on CPUs without PTS

    In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Fix core_data leak on CPUs without PTS pdata->core_data is allocated in init_temp_data() when the first core temp_data of a package is created, but it is only released from destroy_temp_data(), and only in the branch that handles the package temp_data. Package temp_data is created solely when the CPU supports X86_FEATURE_PTS. On a CPU without it, coretemp_cpu_online() never calls coretemp_add_core() with pkg_flag set, so pdata->pkg_data stays NULL. coretemp_cpu_offline() then skips the removal of the package interface, destroy_temp_data() is never called

    Veröffentlicht Aktualisiert
  7. CVE-2026-90176

    Hoch · CVSS 8.1EPSS 0,5%Keine Korrektur veröffentlicht

    ksmbd: Do not skip lock checks for single-byte ranges

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: Do not skip lock checks for single-byte ranges check_lock_range() uses inclusive ranges. Its callers pass the end offset as start + length - 1, so start == end represents a valid single-byte range rather than an empty range. The start == end shortcut therefore skips mandatory byte-range lock checks for one-byte reads, writes, copychunk operations and one-byte truncate ranges. A conflicting lock covering that byte is not checked and the operation is allowed to proceed. Remove the shortcut. The truncate size == inode->i_size case is already handled by only calling ch

    Veröffentlicht Aktualisiert
  8. CVE-2026-90175

    Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht

    smb: server: fix leak of ksmbd_ipc_login_request_ext() returned buffer

    In the Linux kernel, the following vulnerability has been resolved: smb: server: fix leak of ksmbd_ipc_login_request_ext() returned buffer Free it unconditionally after ksmbd_alloc_user() calls. kmemleak splat: unreferenced object 0xffff888103b83540 (size 192): comm "pool-0", pid 16970, jiffies 4377290937 hex dump (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 408ccc66): __kvmalloc_node_noprof+0x730/0x920 handle_generic_event+0xec/0x1a0 [ksmbd] genl_family_rcv_msg_doit+0xe0/0x130

    Veröffentlicht Aktualisiert
  9. CVE-2026-90174

    Hoch · CVSS 7.1EPSS 0,17%Keine Korrektur veröffentlicht

    ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user()

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user() ksmbd_alloc_user() copies resp->hash_sz bytes out of the mountd IPC login response with user->passkey_sz = resp->hash_sz; user->passkey = kmalloc(resp->hash_sz, KSMBD_DEFAULT_GFP); if (user->passkey) memcpy(user->passkey, resp->hash, resp->hash_sz); resp->hash_sz is a __u16 supplied by the response, but resp->hash[] is only KSMBD_REQ_MAX_HASH_SZ bytes. A malformed or malicious login response can set hash_sz well beyond that (up to 65535), so the memcpy() reads past the end of the response object. ipc_validate

    Veröffentlicht Aktualisiert
  10. CVE-2026-90170

    Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht

    ksmbd: validate ipc response length before dereferencing its fields

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate ipc response length before dereferencing its fields ipc_validate_msg() computes the expected message size by reading length fields out of the response buffer supplied by the userspace ksmbd daemon (payload_sz, session_key_len, ngroups, ...). Those fields are read before the buffer is verified to be large enough to contain the struct they belong to, so a short response makes the read land past the end of the allocation. handle_response() sizes entry->response purely from the netlink attribute length (nla_len()) and only guards the leading handle read, so th

    Veröffentlicht Aktualisiert
  11. CVE-2026-90169

    Hoch · CVSS 7.1EPSS 0,25%Keine Korrektur veröffentlicht

    ksmbd: free preauth sessions on connection teardown

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: free preauth sessions on connection teardown SMB3.1.1 multichannel binding preserves the preauthentication hash in a preauth_session between the NTLM negotiate and authenticate requests. The binding NTLM negotiate allocates this object and returns STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends the authenticate request, neither the authenticate nor error cleanup paths free the object. Release any remaining preauthentication sessions when tearing down the connection. Initialize the list when allocating the connection so that this cleanup is

    Veröffentlicht Aktualisiert
  12. CVE-2026-90167

    Hoch · CVSS 7.7EPSS 0,21%Keine Korrektur veröffentlicht

    ksmbd: serialize oplock close with pending break ownership

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: serialize oplock close with pending break ownership close may abort an in-flight oplock break while another breaker already holds an opinfo reference. Releasing pending_break wakes that waiter, but without serializing the close transition with bit acquisition it can become a new break owner through the test_and_set_bit() fast path. It can then overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for a dying opinfo. Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode list. Serialize that transition, pending_break acquisition, and OPLO

    Veröffentlicht Aktualisiert
  13. CVE-2026-90166

    Mittel · CVSS 6EPSS 0,21%Keine Korrektur veröffentlicht

    smb/server: fix null-ptr-deref in ksmbd_ipc_tree_connect_request()

    In the Linux kernel, the following vulnerability has been resolved: smb/server: fix null-ptr-deref in ksmbd_ipc_tree_connect_request() See the procedure below: ksmbd_tree_conn_connect ksmbd_share_config_get share->name = kstrdup() // fail if (!test_share_config_flag(share, KSMBD_SHARE_FLAG_PIPE)) // false // do not check `share->name` ksmbd_ipc_tree_connect_request strlen(share->name) // null-ptr-deref

    Veröffentlicht Aktualisiert
  14. CVE-2026-90162

    Hoch · CVSS 8.8EPSS 0,7%Keine Korrektur veröffentlicht

    ksmbd: defer publishing granted locks to prevent UAF/double-free race

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer publishing granted locks to prevent UAF/double-free race In smb2_lock(), mid-batch granted locks are published to connection-wide (conn->lock_list) and file-wide (fp->lock_list) lists immediately upon vfs_lock_file() success, while also remaining tracked on the stack-local rollback_list. If a subsequent element in the same SMB2_LOCK request array fails validation or execution, the thread jumps to out: and walks rollback_list to undo previously granted locks. However, because the granted lock was already published to conn->lock_list, a concurrent UNLOCK request

    Veröffentlicht Aktualisiert
  15. CVE-2026-90161

    Hoch · CVSS 7.1EPSS 0,18%Keine Korrektur veröffentlicht

    erofs: fix interlaced ztailpacking pclusters

    In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced ztailpacking pclusters On-disk sizes of interlaced pclusters should be block-aligned, and ztailpacking interlaced pclusters should be invalid at all. Currently, mkfs.erofs won't generate any interlaced pcluster with ztailpacking enabled, so this doesn't affect any existing valid filesystems. However, crafted images can contain invalid interlaced ztailpacking pclusters, resulting in an out-of-bounds read from a kmap'd page and copying irrelevant kernel memory into userspace-visible page cache.

    Veröffentlicht Aktualisiert
  16. CVE-2026-90160

    Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht

    lwt_bpf: Restore reserved headroom after xmit program

    In the Linux kernel, the following vulnerability has been resolved: lwt_bpf: Restore reserved headroom after xmit program ip_finish_output2() expands an skb to LL_RESERVED_SPACE(dev) before LWT xmit. An LWT_XMIT BPF program can then modify the skb head and still return BPF_OK, so bpf_xmit() rechecks the remaining headroom before the skb continues to neighbour output. That recheck uses dst->dev->hard_header_len. This is not enough for the neighbour cached-header path: neigh_hh_output() copies the cached hardware header using the aligned hh_cache size, HH_DATA_MOD for short headers or HH_DATA_ALIGN(hh_len) otherwise. On Ethernet, hard_heade

    Veröffentlicht Aktualisiert
  17. CVE-2026-90159

    Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht

    bpf: Disallow bpf_{g,s}etsockopt() in cgroup UNIX getname hooks

    In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow bpf_{g,s}etsockopt() in cgroup UNIX getname hooks _bpf_setsockopt() and _bpf_getsockopt() call sock_owned_by_me() for full sockets, so these helpers expect the socket lock to be held. BPF_CGROUP_UNIX_GETPEERNAME and BPF_CGROUP_UNIX_GETSOCKNAME run BPF programs without acquiring the socket lock. A program attached to either hook can therefore trigger the sock_owned_by_me() warning by calling bpf_setsockopt() or bpf_getsockopt(). Disallow bpf_setsockopt() and bpf_getsockopt() for CGROUP_UNIX_GETPEERNAME and CGROUP_UNIX_GETSOCKNAME.

    Veröffentlicht Aktualisiert
  18. CVE-2026-90158

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    m68k: nfcon: Do not call console_is_registered() in nfcon_device()

    In the Linux kernel, the following vulnerability has been resolved: m68k: nfcon: Do not call console_is_registered() in nfcon_device() Since 7c2af0f634f1 ("tty: tty_io: use console_list_lock for list synchronization") show_cons_active() calls the .device() method under the console_list_lock, but console_is_registered() tries to acquire console_list_lock as well, causing a deadlock. It should not be necessary to check console_is_registered() here since the function should not be called in the fist place when the console is not registered.

    Veröffentlicht Aktualisiert
  19. CVE-2026-90157

    Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht

    bpf: Reject negative optlen in cgroup getsockopt hook

    In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative optlen in cgroup getsockopt hook A cgroup getsockopt BPF program can shrink ctx->optlen after the kernel getsockopt handler has run. The kernel-buffer variant, used by TCP_ZEROCOPY_RECEIVE, only rejects values larger than the original length. If BPF writes a negative optlen, that value is accepted and propagated back to the TCP getsockopt code. It can then be passed to copy_to_sockptr() as a size_t and trigger the hardened usercopy bytes > INT_MAX warning. Reject negative ctx.optlen in __cgroup_bpf_run_filter_getsockopt_kern(), matching the lower-boun

    Veröffentlicht Aktualisiert
  20. CVE-2026-90156

    Mittel · CVSS 6EPSS 0,21%Keine Korrektur veröffentlicht

    ksmbd: safely discard unregistered deferred locks

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper.

    Veröffentlicht Aktualisiert

Prüfen Sie Ihren Server

Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.

Prüfen Sie Ihren Server →