netfilter: nf_tables: skip expired catchall elements on insert and delete
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: skip expired catchall elements on insert and delete
nft_setelem_catchall_insert() looks up duplicates with
nft_set_elem_active() only, while nft_set_catchall_lookup() and the
dump path additionally skip expired elements.
Once a catchall element with a timeout expires, this predicate drift
makes it invisible to userspace dumps, yet it still blocks
re-insertion: with NLM_F_EXCL the request fails with -EEXIST, and
without it the request reports success but silently inserts nothing.
The stale entry only goes away when the (user-tunable) gc interval
elapse
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
nfc: fix use-after-free in nfc_get_local_general_bytes
In the Linux kernel, the following vulnerability has been resolved:
nfc: fix use-after-free in nfc_get_local_general_bytes
Commit 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by
nfc_llcp_find_local") attempted to fix a use-after-free (UAF) issue by
invoking nfc_llcp_local_put(local) after accessing local->gb. However,
if the reference count drops to zero, local is freed immediately,
leading to a use-after-free when callers access the returned pointer.
Alternative approaches using dynamic allocation (e.g. kmemdup) introduced
memory leaks because callers consistently treat the returned pointer as
borrowed memory.
Fix this properly by r
nfc: llcp: drop truncated I/RR/RNR PDUs in nfc_llcp_recv_hdlc()
In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: drop truncated I/RR/RNR PDUs in nfc_llcp_recv_hdlc()
nfc_llcp_recv_hdlc() reads the sequence byte skb->data[2], via
nfc_llcp_ns()/nfc_llcp_nr(), before any length check. The receive path
only guarantees the two-byte LLCP header -- __nfc_llcp_recv() checks it
with pskb_may_pull() and nfc_llcp_recv_agf() admits two-byte inner PDUs
-- so a two-byte I, RR or RNR PDU reads one byte of uninitialised skb
tailroom. The byte becomes N(R)/N(S); a peer can already set those with
a well-formed PDU, so this is acting on uninitialised memory, not new
peer control.
Guard the r
nfc: port100: reject frames whose declared length exceeds the received data
In the Linux kernel, the following vulnerability has been resolved:
nfc: port100: reject frames whose declared length exceeds the received data
port100_recv_response() passes the URB transfer buffer to
port100_rx_frame_is_valid(), which checksums le16_to_cpu(frame->datalen)
bytes of frame->data. datalen is a 16-bit field supplied by the device
and is never checked against the number of bytes actually received
(urb->actual_length), so a device reporting a datalen larger than the
received frame makes port100_data_checksum() read out of bounds past the
transfer buffer.
Reject a response whose declared frame size does not fit the received
leng
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
nfc: trf7970a: power down on startup RX gain failure
In the Linux kernel, the following vulnerability has been resolved:
nfc: trf7970a: power down on startup RX gain failure
trf7970a_startup() powers up the device before applying the optional RX
gain reduction. If the register read or write fails, it returns without
undoing that power-up. Probe's unwind only drops the separate regulator
references acquired by probe, leaving the additional VIN enable from
startup unbalanced. The system resume caller also has no power-down on
this error.
Call trf7970a_power_down() before returning the RX gain error to deassert
the enable GPIOs, release the startup VIN reference and restore the
powered-off stat
scsi: libiscsi_tcp: Check the data direction of a Data-In PDU
In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi_tcp: Check the data direction of a Data-In PDU
The Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task
and copies the PDU's data segment into that command's scatterlist without
asking whether the command was reading. iscsi_tcp_r2t_rsp() in the same
file does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE.
A target that answers a WRITE command's ITT with a Data-In therefore has
the initiator write target-supplied bytes into the pages that write was
about to send. Those are the caller's own pinned pages for an O_DIRECT
write,
perf/core: Fix NULL pmu_ctx passed to pmu->sched_task()
In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix NULL pmu_ctx passed to pmu->sched_task()
perf_pmu_sched_task() returns early when cpuctx->task_ctx is set, and
cpc->task_epc is only non-NULL while a task context is scheduled in on
this CPU. __perf_pmu_sched_task() therefore always passes NULL:
Unable to handle kernel NULL pointer dereference at virtual address 00
pc : armv8pmu_sched_task+0x14/0x50
Call trace:
armv8pmu_sched_task+0x14/0x50 (P)
perf_pmu_sched_task+0xac/0x108
__perf_event_task_sched_out+0x6c/0xe0
Pass &cpc->epc instead, the CPU-wide context for this PMU, which the
function alr
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
s390/cio: Fix NULL pointer dereference in ccw_device_get_util_str()
In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix NULL pointer dereference in ccw_device_get_util_str()
The channel path registry entry associated with a CHPID may be removed
while the subchannel's PMCW still references that CHPID. In this case,
chpid_to_chp() can return NULL, leading to a NULL pointer dereference.
Add the missing NULL check before dereferencing the returned pointer.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
s390/cmf: Fix virtual vs physical address confusion
In the Linux kernel, the following vulnerability has been resolved:
s390/cmf: Fix virtual vs physical address confusion
The measurement block address is an absolute address. Define the
associated schib_config and schib fields as dma64_t to enable automatic
detection of incorrect assignments. Also add the missing virt_to_dma64()
translation.
Without this fix, a wrong address will be used by firmware when storing
extended format channel measurement data on kernels built with
CONFIG_RANDOMIZE_IDENTITY_BASE=y.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
s390/pci: Fix missing device lock in zpci_report_status()
In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Fix missing device lock in zpci_report_status()
When pdev is non-NULL, zpci_report_status() accesses the device's driver.
To get a consistent state matching the recovery, the device lock needs to
be held. Do so by expanding the existing device lock critical section.
The lock only needs to be held when the pdev is non-NULL, so extract
the pdev-specific reporting into a helper function which also adds a
lockdep assertion to detect calls without the device lock held.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
s390/vfio-ap: fix KVM GISC and page leak when queue removed from host config
In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix KVM GISC and page leak when queue removed from host config
Three related problems exist in the handling of KVM interrupt and page
resources when a queue is removed from the host's AP configuration
while assigned to a mediated device (mdev).
Problem 1:
~~~~~~~~~
AP_RESPONSE_Q_NOT_AVAIL not handled in vfio_ap_mdev_reset_queue()
When the AP bus removes a queue device whose adapter or domain has
been removed from the host's AP configuration,
vfio_ap_mdev_remove_queue() is called. If the queue is still in the
host's AP configuration at that point, it calls
vf
KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV
In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV
Unconditionally free SEV's "have run CPUs" cpumask in the VM destroy path,
i.e. even for what appear to be non-SEV VMs, as an SEV VM becomes a non-SEV
VM if its state is intra-host migrated. Alternatively, the mask could be
freed in sev_migrate_from() when "converting" the source VM, but that gets
annoying because ideally KVM would nullify the mask to guard against UAF,
and nullifying the mask would need be conditioned on CPUMASK_OFFSTACK=y.
Freeing the mask during sev_migrate_from() is also no
KVM: SEV: Do cache maintenance on the source VM during intra-host migration
In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Do cache maintenance on the source VM during intra-host migration
Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.
Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix AArch32 DBGBXVR<n> handling
The consolidation of the breakpoint and watchpoint register accessors
switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter
selects backing storage with demux_wb_reg(), which only handles Op2 values
4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits
KVM_BUG_ON() and marks the VM dead.
DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor
already selects the upper half. Map Op2 1 to dbg_bvr[] alongside Op2 4,
restoring the pre-regression behavior.
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix spurious warning for benign stage 2 teardown race
kvmtool was used to establish an L1 guest with 8 CPUs and 8 GiB of RAM, an
L2 guest with 4 CPUs and 4 GiB of RAM and an L3 guest with 2 CPUs and 2 GiB
of RAM, all of which was then exited.
Under memory pressure in the L0 host warnings were observed due to
migration triggered by compaction:
WARNING: arch/arm64/kvm/mmu.c:336 at __unmap_stage2_range+0x64/0x80,
CPU#5: kcompactd0/66
Which was, in turn, triggered by an MMU notifier for the host invalidation:
mmu_notifier_invalidate_range_start()
-> ... -> kvm
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix null ptr deref on nested wp/unmap, teardown race
Commit 7270cc9157f4 ("KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU
notifiers") introduced VNCR_EL2 invalidation in both kvm_nested_s2_unmap()
and kvm_nested_s2_wp().
However at the point of this being performed concurrent stage 2 teardown of
a nested guest can cause kvm->arch.mmu.pgt to be set to NULL.
This happens in kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() ->
kvm_free_stage2_pgd() and is performed under the kvm->mmu_lock.
Commit ec14c272408a ("KVM: arm64: nv: Unmap/flush shadow s
KVM: arm64: Transfer the hyp stack pages out of the host stage-2
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Transfer the hyp stack pages out of the host stage-2
fix_host_ownership() walks only the linear-map alias of each memblock
region, and the per-CPU hyp stack, mapped in the private VA range for
its guard page, has none.
Walk each stack's VA range with the same walker.
RISC-V: KVM: Serialize IMSIC attributes with vCPU migration
In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Serialize IMSIC attributes with vCPU migration
KVM device ioctls are not serialized against KVM_RUN. As a result,
kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of
an IMSIC VS-file before a concurrent vCPU migration releases it.
The HGEI can then be allocated to another vCPU before imsic_vsfile_rw()
uses the stale tuple. A GET or SET attribute may consequently access the
new owner's interrupt file.
Serialize the entire IMSIC attribute operation with the target vCPU
mutex. This prevents the VS-file from being migrated and recycled until
t
RISC-V: KVM: Synchronize hrtimer callback during teardown
In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Synchronize hrtimer callback during teardown
The non-Sstc hrtimer callback clears next_set before its final uses of
the enclosing vCPU. If teardown observes next_set as false while the
callback is still running, kvm_riscv_vcpu_timer_cancel() skips
hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the
callback enters kvm_riscv_vcpu_set_interrupt().
A guest can arm the timer with SBI TIME and request shutdown with SBI
legacy shutdown or SRST. A VMM that honors KVM_EXIT_SYSTEM_EVENT and
destroys the VM supplies the teardown side of the race; no
Bluetooth: hci_conn: fix CIS hold ownership on reuse
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix CIS hold ownership on reuse
Commit 69997d50ec57 ("Bluetooth: ISO: handle bound CIS cleanup via
hci_conn") made hci_bind_cis() and hci_connect_cis() return a
connection with one hold for the ISO layer. hci_bind_cis() currently
takes that hold only after configuring a CIS, so its BT_CONNECTED and
matching BT_BOUND paths return a bare lookup result. Its configuration
failure path can likewise call hci_conn_drop() before taking a hold.
Take the hold before any state-dependent return or configuration error
so every successful return follows the docume