ieee802154: ca8210: fix cas_ctl leak on spi_async failure
In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: fix cas_ctl leak on spi_async failure
ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC)
and relies entirely on the SPI completion callback
ca8210_spi_transfer_complete() to free it.
The spi_async() API only invokes the completion callback on successful
submission. On failure it returns a negative error code without ever
queuing the callback, which leaves cas_ctl and its embedded spi_message
and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is
inside the completion callback, so there is no other reclamation path.
ca8210_
ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit
In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit
ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange
a kmalloc'd buffer pointer through a struct kfifo, but pass a literal
'4' as the byte count to kfifo_in()/kfifo_out().
This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the
low 4 bytes of the 8-byte pointer are written into the FIFO. The reader
then reads back 4 bytes into an 8-byte local pointer variable, leaving
the upper 4 bytes uninitialized stack data. The first dereference of
the reconstructed pointer (fifo_buffer[1]) a
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's
ipmi: Fix user refcount underflow in event delivery
In the Linux kernel, the following vulnerability has been resolved:
ipmi: Fix user refcount underflow in event delivery
ipmi_alloc_recv_msg(user) takes the temporary user reference owned by the
receive message, and ipmi_free_recv_msg() drops it again. If event delivery
fails after allocating receive messages for earlier users,
handle_read_event_rsp() rolls those messages back with
ipmi_free_recv_msg().
That rollback path still drops user->refcount explicitly after freeing each
message. The extra put can free a user that remains linked on intf->users,
so later event delivery may dereference a freed user or trip refcount_t's
addition-on-zero
espintcp: use sk_msg_free_partial to fix partial send
In the Linux kernel, the following vulnerability has been resolved:
espintcp: use sk_msg_free_partial to fix partial send
sk_msg_free_partial() ensures consistency of the skmsg at every
iteration, without having to manually handle uncharges and offsets.
This simplifies the code, and fixes some bugs in skmsg accounting when
we don't send the full contents.
In the Linux kernel, the following vulnerability has been resolved:
ipmi: fix refcount leak in i_ipmi_request()
When a caller provides a `supplied_recv` message to i_ipmi_request(),
the function increments the user's `nr_msgs` reference count. If an
error occurs later, the out_err cleanup path only frees the recv_msg
if the function allocated it itself (i.e., !supplied_recv). In the
supplied_recv case the cleanup is skipped, leaving the reference count
elevated. The caller ipmi_request_supply_msgs() does not release the
supplied_recv on error, so the reference is permanently leaked.
Fix this by explicitly reverting the reference count oper
bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp()
In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp()
If the allocation of fp[i].tpa_info fails, the error path will not free
the struct bnx2x_fastpath allocated earlier, as it is not linked to the
bp structure yet. Fix that by linking it immediately after allocation.
net: liquidio: fix BAR resource leak on PF number failure
In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: fix BAR resource leak on PF number failure
If cn23xx_get_pf_num() fails, the function returns without
unmapping either BAR. Unmap both BARs before returning from
the error path.
Found by manual code review.
net: lan743x: Initialize eth_syslock spinlock before use
In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: Initialize eth_syslock spinlock before use
lan743x_hardware_init() calls pci11x1x_strap_get_status() during the
PCI11x1x probe sequence. That helper acquires the Ethernet subsystem
hardware lock via lan743x_hs_syslock_acquire(), which relies on
adapter->eth_syslock_spinlock to serialize access.
The spinlock is currently initialized only after the strap status is
read. With CONFIG_DEBUG_SPINLOCK enabled, taking the zeroed initialized
spinlock can trip the spinlock debug check.
Fix by initializing adapter->eth_syslock_spinlock before reading the
strap status s
net/sched: sch_multiq: Replace direct dequeue call with peek and qdisc_dequeue_peeked
In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_multiq: Replace direct dequeue call with peek and qdisc_dequeue_peeked
multiq_dequeue() takes a packet from a band's child with a direct
->dequeue() call after multiq_peek() peeked it. When the child is
non-work-conserving the peek stashes the skb in the child's gso_skb, so
the direct dequeue returns a different skb and orphans the stash,
desyncing the child's qlen/backlog. With a qfq child reached through a
peeking parent (e.g. tbf) this re-enters the child on an emptied list and
dereferences NULL, panicking the kernel from softirq on ordinary egress.
Take
net/sched: sch_taprio: Replace direct dequeue call with peek and qdisc_dequeue_peeked
In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_taprio: Replace direct dequeue call with peek and qdisc_dequeue_peeked
When taprio's software path peeks a non-work-conserving child qdisc, the
child stashes the peeked skb in its gso_skb; taprio_dequeue_from_txq()
then takes the packet with a direct child ->dequeue() call, which ignores
that stash, orphans the peeked skb and desyncs the child's qlen/backlog.
With a qfq child this re-enters the child on an emptied list and
dereferences NULL, panicking the kernel from softirq on ordinary egress.
Take the packet through qdisc_dequeue_peeked(), as sch_red and s
orangefs: keep the readdir entry size 64-bit in fill_from_part()
In the Linux kernel, the following vulnerability has been resolved:
orangefs: keep the readdir entry size 64-bit in fill_from_part()
fill_from_part() computes the size of a directory entry in size_t but
stores it in a __u32. An entry length near U32_MAX wraps it to a small
value, bypasses the bounds check, and is then used to index the entry,
reading far past the directory part -- an out-of-bounds read that oopses
the kernel.
Compute the size as a u64 so it cannot truncate; the bounds check then
rejects the entry. The trailer is supplied by the userspace client.
ata: libata-core: Reject an invalid concurrent positioning ranges count
In the Linux kernel, the following vulnerability has been resolved:
ata: libata-core: Reject an invalid concurrent positioning ranges count
ata_dev_config_cpr() takes the number of range descriptors from buf[0]
of the concurrent positioning ranges log (up to 255), which the device
reports independently of the log size in the GPL directory. The count is
then walked at a fixed 32-byte stride in two places with no bound: the
log read here, and the INQUIRY VPD page B9h emitter, which writes one
descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device
reporting a count larger than its own log overflows the read buffer (up
to 7704 by
net: wwan: iosm: bound device offsets in the MUX downlink decoder
In the Linux kernel, the following vulnerability has been resolved:
net: wwan: iosm: bound device offsets in the MUX downlink decoder
mux_dl_adb_decode() walks a chain of aggregated datagram tables using
offsets and lengths taken from the modem. first_table_index,
next_table_index, table_length, datagram_index and datagram_length are
all device supplied le values. Only first_table_index was checked, and
only for being non zero. The decoder then formed adth = block +
adth_index and read the table header and the datagram entries with no
bound against the received skb. A modem that reports an index or a
length past the downlink buffer makes th
riscv: probes: save original sp in rethook trampoline
In the Linux kernel, the following vulnerability has been resolved:
riscv: probes: save original sp in rethook trampoline
Reading a word from the stack in a kretprobe crashes a risc-v kernel.
$ cd /sys/kernel/tracing/
$ echo 'r n_tty_write $stack0' > dynamic_events
$ echo 1 > events/kprobes/enable
Unable to handle kernel paging request at virtual address 0000000200000128
...
[<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38
[<ffffffff80177196>] process_fetch_insn+0x3ee/0x760
[<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0
[<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58
[<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x
s390/monwriter: Reject buffer reuse with different data length
In the Linux kernel, the following vulnerability has been resolved:
s390/monwriter: Reject buffer reuse with different data length
When data buffers are reused, e.g. for interval sample records, the
first record determines the data length, and the size of the buffer for
user copy. Current monwriter code does not check if the data length was
changed for subsequent records, which also would never happen for valid
user programs.
However, a malicious user could change the data length, resulting in out
of bounds user copy to the kernel buffer, and memory corruption. By
default, the monwriter misc device is created with root-only permissions,
so
mac802154: remove interfaces with RCU list deletion
In the Linux kernel, the following vulnerability has been resolved:
mac802154: remove interfaces with RCU list deletion
Queue wake, stop, and disable paths walk local->interfaces under RCU.
The bulk hardware teardown path removes entries with list_del(), so an
asynchronous transmit completion can follow a poisoned list node in
ieee802154_wake_queue().
Use list_del_rcu() as in the single-interface removal path. The following
unregister_netdevice() waits for in-flight RCU readers before freeing the
netdevice, so no separate grace-period wait is needed.
octeontx2-pf: fix SQB pointer leak on init failure
In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix SQB pointer leak on init failure
otx2_init_hw_resources() initializes SQ aura and pool resources before
several later setup steps. On failure, err_free_sq_ptrs only frees SQB
pages, leaving the per-SQ sqb_ptrs arrays behind.
Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs
even when sq->sqe has not been allocated yet.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual in
In the Linux kernel, the following vulnerability has been resolved:
llc: fix SAP refcount leak in llc_ui_autobind()
llc_ui_autobind() opens a SAP after choosing a dynamic LSAP.
llc_sap_open() returns a reference owned by the caller, and
llc_sap_add_socket() takes a second reference for the socket's
membership in the SAP hash tables.
llc_ui_bind() drops the caller's reference after adding the socket,
but llc_ui_autobind() keeps it. When the socket is closed,
llc_sap_remove_socket() releases only the socket reference, leaving
the SAP on llc_sap_list with sk_count == 0.
This is user-visible because repeated autobind and close cycles can cons
ipvs: use parsed transport offset in SCTP state lookup
In the Linux kernel, the following vulnerability has been resolved:
ipvs: use parsed transport offset in SCTP state lookup
set_sctp_state() reads the SCTP chunk header again in order to drive the
IPVS SCTP state table. For IPv6 it computes the offset with
sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from
ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped
extension headers and found the real transport header.
This makes the state machine read from the wrong offset for IPv6 SCTP
packets that carry extension headers. For example, an INIT packet with an
8-byte destination options header can be scheduled cor