EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
In the Linux kernel, the following vulnerability has been resolved:
EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned
long, but the target field (poll_msec) is unsigned int. On 64-bit systems,
a value > UINT_MAX is silently truncated when stored.
Fix the mismatch by using kstrtouint() instead. This rejects values larger
than UINT_MAX at parse time, making truncation impossible. Also add a check
for value < 1 to reject the 0-delay case, which would cause the poll work to
spin without delay and consume 100% CPU.
drm/virtio: use the DMA API for resource backing on Xen
In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use the DMA API for resource backing on Xen
On a Xen PV domain page addresses bear no relation to the real machine
addresses the host would have to use to reach it.
virtio_ring.c handles this correctly, vring_use_map_api() returns true
for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM.
virtio-gpu makes the same decision independently, but its copy
looks only at the feature bit:
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
QEMU does not set iommu_platform on virtio-vga by default, so
VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api
accel/qaic: Address potential out-of-bounds read in resp_worker()
In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Address potential out-of-bounds read in resp_worker()
Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the
owner went away")' fixes the scenario it was intended for by walking the
message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it
skipped over the bounds checking code that is included in decode_message().
This could lead to issues such as reading past the slab allocation's end,
infinite loops or kernel panics. For those issues to happen, a malformed
wire message is needed to be sent from the device.
Instead of duplica
In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: fix -EIO cleanup order in queue_rq
On -EIO, the RDMA queue_rq path reports a host path error and then
still cleans up the command and unmaps the SQE DMA. The path error
helper completes the request, so that is double cleanup and DMA unmap
after the request is already complete.
Unmap the SQE first, then report the host path error. Skip the outer
command cleanup on that path.
In the Linux kernel, the following vulnerability has been resolved:
nvme: fix racy access to FDP placement id array
nvme_query_fdp_info() is called per-path and therefore prone to races.
It populates head->nr_plids/head->plids for fdp registration.
But nothing protects that pair from concurrent access - two paths scanning
the same namespace can race to populate it.
Avoid the race by moving this initialization work to nvme_alloc_ns_head()
which is called once per shared namespace.
nvmet-rdma: fix queue leak when connect backlog is exceeded
In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix queue leak when connect backlog is exceeded
When pending disconnecting queues exceed the backlog limit, the
connect path only drops the device reference and leaks the newly
allocated queue and its IB resources.
bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic
Take the following unprivileged program as an example:
r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */
...
14: r0 += r1 /* r1 is a bounded scalar */
15: r9 = r0
Loading it triggers a verifier warning from reg_bounds_sanity_check():
verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out
of sync with range bounds r64={.base=0x0, .size=0x0}
r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0)
What happens:
1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(),
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix BPF_F_CPU validation for sparse CPU IDs
BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map
operation flags. bpf_map_check_op_flags() currently compares that ID
with num_possible_cpus(), which is the number of possible CPUs rather
than a bound on CPU IDs.
On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU
mask was 0,2-3. A userspace program using raw bpf() syscalls creates
a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations
for each CPU by setting BPF_F_CPU and the CPU ID in the flags.
With the old check, CPU 1 i
bpf: Fix percpu map update indexing with sparse CPU IDs
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix percpu map update indexing with sparse CPU IDs
Per-CPU array, hash, and cgroup storage map updates without BPF_F_CPU
or BPF_F_ALL_CPUS use a value buffer whose per-CPU slots are packed in
possible-CPU order. The buffer is sized as:
round_up(value_size, 8) * num_possible_cpus()
The update paths iterate over possible CPUs, but use the logical CPU ID
to calculate the source offset:
value + size * cpu
This only works when possible CPU IDs are contiguous starting at zero.
For example, with a possible CPU mask of 0,2-3, the buffer contains
three slots correspond
drm/gud: validate GUD_ROTATION_0 is present in supported rotations
In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate GUD_ROTATION_0 is present in supported rotations
The rotation argument to drm_plane_create_rotation_property() is set to
DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as
the supported_rotations argument. The driver never validates that
GUD_ROTATION_0 is present, so a device that omits it from its
GUD_PROPERTY_ROTATION triggers the
WARN_ON(rotation & ~supported_rotations) in
drm_plane_create_rotation_property()
Fix this by skipping the creation of rotation property if the device
doesn't have the GUD_ROTATION_0 bit
In the Linux kernel, the following vulnerability has been resolved:
printk: Don't WARN on kthread_run failure.
Since __kthread_create_on_node() returns -EINTR upon SIGKILL,
we should not use WARN_ON() in order to catch kthread_run() failure.
accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain
In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain
struct amdxdna_cmd_chain contains a flexible array annotated with
__counted_by(command_count). Since the structure is stored in shared
AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently.
If command_count is changed to zero, the bounds check generated from
__counted_by may fail and trigger a kernel panic.
Remove __counted_by to avoid relying on the userspace-controlled
command_count for the flexible array bounds check.
accel: ethosu: Don't read the U65 rounding mode as a storage mode
In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Don't read the U65 rounding mode as a storage mode
Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage
mode on U85 only. On U65 the same field holds the rounding mode, and the
command stream parser has read it as a storage mode since the driver was
added.
That went unnoticed while unknown values fell through the switch, but
now that they are rejected, every U65 command stream that asks for
natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits
it for average pooling, concatenation, split, unpack, strided slice, LUT
and ar
In the Linux kernel, the following vulnerability has been resolved:
drm/cirrus-qemu: Validate BAR0 size during probe
The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate
framebuffer sizes. However, during PCI probe, the driver mapped BAR0
without verifying that its size matches `CIRRUS_VRAM_SIZE`.
If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the
mapped VRAM will be smaller than expected. Because validation checks assume
4 MB VRAM, framebuffers larger than the mapped memory can be created.
When the display plane is updated (e.g. during release),
`cirrus_primary_plane_helper_atomic_update()` copi
bpf: check_cond_jmp_op(): properly infer if register is null
In the Linux kernel, the following vulnerability has been resolved:
bpf: check_cond_jmp_op(): properly infer if register is null
Nicholas Carlini reported a bug when verifier can incorrectly infer
that a pointer is non-null. The bug occurs when two pointers are
compared and one of them has a type w/o PTR_MAYBE_NULL flag,
but which allows a value to be NULL at runtime.
Here is an example:
// `a` is PTR_TO_MEM | MEM_RDONLY | PTR_UNTRUSTED
// `a` is 0 at runtime.
// `b` is PTR_TO_MAP_VALUE | PTR_MAYBE_NULL
void *a = bpf_rdonly_cast(0, 0);
int *b = bpf_map_lookup_elem(...);
if (a == b)
*b = 42; // verifier does not catch nul
net: stmmac: fix dma mapping leak in stmmac_tso_xmit()
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix dma mapping leak in stmmac_tso_xmit()
In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the
frame is dropped but the DMA mappings already created for the linear
part and for the fragments mapped before the failure are never
unmapped, leaking DMA mappings.
Fix the leak by walking back over the descriptors used by the frame and
releasing each of them with stmmac_free_tx_buffer(). Moreover, release
the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers.
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START
The SCTP_CMD_TIMER_START handler checks timer_pending() before calling
timer_reduce(). The timer can expire and detach between these operations,
causing timer_reduce() to rearm the timer without taking the association
reference required for the newly armed timer.
The timer callback later unconditionally drops its association reference,
which can leave the association reference count unbalanced and result in
use-after-free during association teardown.
Use the return value of timer_reduce() to determine whether the timer was
a
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
sas_port_alloc_num() can return NULL on memory allocation failure. The
return value is passed directly to sas_port_add() without a NULL check,
which causes a NULL pointer dereference.
Additionally, if sas_port_add() fails, the allocated port is not freed
before jumping to out_fail, leaking the sas_port structure. Call
sas_port_free() to properly release it.
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error case
In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for insert range
smb3_insert_range() does not check if the new file size
(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass
RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t
range.
Use check_add_overflow() to calculate the new EOF. Validate it with
inode_newsize_ok() before modifying the file.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB
# A regular write is stopped at 3 MiB.
dd if=/dev/zero of="$FILE" bs=1M c