Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
bpf: reject BPF_PSEUDO_FUNC reference to the main program
In the Linux kernel, the following vulnerability has been resolved:
bpf: reject BPF_PSEUDO_FUNC reference to the main program
fixups.c:jit_subprogs() rewrites BPF_PSEUDO_FUNC loads to contain real
function addresses. This function is invoked from bpf_jit_subprogs()
only when env->subprog_cnt > 1. Meaning that for any program like
below:
int main(void *ctx) {
void *ptr = main;
...
bpf_timer_set_callback(..., ptr);
...
}
The 'ptr' won't be ever converted to contain an address.
In combination with e.g. bpf_timer_set_callback() this would lead to a
function call at a bogus address.
Instead of complicating the implementati
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
bonding: do not clear curr_active_slave prematurely when releasing all slaves
In the Linux kernel, the following vulnerability has been resolved:
bonding: do not clear curr_active_slave prematurely when releasing all slaves
When releasing all slaves during bond destruction (all == true),
__bond_release_one() unconditionally clears bond->curr_active_slave to
NULL in every iteration.
If a backup slave is released before the active slave,
bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(),
which increments the active slave dev promiscuity counter and sets
bond_info->primary_is_promisc = 1.
Because bond->curr_active_slave was prematurely cleared to NULL when
releasing the backup slave, the subsequent
net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().
In the Linux kernel, the following vulnerability has been resolved:
net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().
syzbot reported the warning in cfg80211_pernet_exit(). [0]
The repro does the following:
1. create two device in root netns and non-root netns
2. assign the same altname for the two devices
3. remove the non-root netns
Since commit 7663d522099e ("net: check for altname conflicts
when changing netdev's netns"), cfg80211_switch_netns() and
cfg802154_switch_netns() fail if init_net has a device with the
conflicting altname.
default_device_exit_net() had the same issue and commit d09486a
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
net/rds: use wq_has_sleeper() in release_in_xmit()
In the Linux kernel, the following vulnerability has been resolved:
net/rds: use wq_has_sleeper() in release_in_xmit()
release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then
checks waitqueue_active() to decide whether anyone needs waking.
clear_bit_unlock() is only a release operation: it orders the
critical section before the bit clear, but does not order the
subsequent plain load of the wait queue head after it. The waiter
side does the mirror image - it adds itself to the wait queue and
then tests the bit. That is the classic store-buffering pattern: the
releasing CPU can read the wait queue as empty while the waiting CP
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
net/rds: clear cp_flags bits individually in rds_conn_path_reset()
In the Linux kernel, the following vulnerability has been resolved:
net/rds: clear cp_flags bits individually in rds_conn_path_reset()
rds_conn_path_reset() wipes the whole flag word with a plain
cp->cp_flags = 0 store. Every other accessor of that word uses
atomic bitops, and some of them can run concurrently with the reset:
RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the
transport completion paths, neither of which holds anything that
excludes the shutdown worker. A plain store racing an atomic
read-modify-write on the same word is a data race, and whichever
side loses has its update silently discarded.
Clear the two
net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks()
In the Linux kernel, the following vulnerability has been resolved:
net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks()
rds_tcp_reset_callbacks() quiesces the transmit path by setting the
path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to
be sampled clear before swapping the underlying socket and calling
rds_send_path_reset().
Sampling the bit clear is not the same as owning it: rds_send_xmit()
can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its
state recheck after taking the lock is a store-buffering pattern (the
resetter writes the state and reads the bit, the sender writes the
bit and reads the
net/rds: acquire the fastpath locks in rds_conn_shutdown()
In the Linux kernel, the following vulnerability has been resolved:
net/rds: acquire the fastpath locks in rds_conn_shutdown()
rds_conn_shutdown() quiesces the transmit and receive-refill paths by
waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and
then runs the transport shutdown and rds_conn_path_reset(). Sampling
the bits clear is not the same as owning them: the moment after the
wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or
rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run
concurrently with the teardown.
The sender does recheck the connection state after taking the lock,
but that rech
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
net/rds: don't let rds_conn_shutdown() consume a concurrent drop
In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let rds_conn_shutdown() consume a concurrent drop
rds_conn_shutdown() finishes by moving the path from
RDS_CONN_DISCONNECTING to RDS_CONN_DOWN, and also accepts
RDS_CONN_ERROR as the starting state of that final transition, so that
a FIN processed in softirq context during the teardown does not derail
the shutdown into a noisy error path.
But consuming that RDS_CONN_ERROR also consumes the shutdown pass that
came with it: rds_conn_path_drop() sets RDS_CONN_ERROR and then queues
cp_down_w, and a pass that starts on a path already in RDS_CONN_DOWN
is a no-op.
In the Linux kernel, the following vulnerability has been resolved:
erofs: disable LZ4 rolling decompression for now
LZ4 rolling decompression [1] was introduced to reduce the memory
footprint of temporary pages:
For many cases, it is needed for users to read small data within
a compressed extent (pcluster), either due to random small read, or
since uptodate folios (typically order-0) cannot be reused for
decompression again since decompression algorithm refills
already-uptodate folios.
Rolling decompression works because LZ4 is LZ77-based and only refers
to the most recent 64 KiB of decompressed data, so in theory only a
bounded rol
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
bpf: Fix NULL-ptr-deref when showing a void BTF type
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref when showing a void BTF type
btf_modifier_show() resolves the modifier and then calls
btf_type_ops(t)->show() unconditionally. For the void type (type_id 0,
BTF_KIND_UNKN) kind_ops[] has no entry, so ->show is NULL.
A "const void" (a modifier resolving to void) cannot be a map key or
value - map_check_btf() rejects it because void has no size - so the map
dump path does not reach it. But bpf_snprintf_btf() takes a type_id
straight from the BPF program, and passing such a "const void" from the
vmlinux BTF NULL-derefs:
KASAN: null-ptr-deref in range
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
bpf: Fix NULL-ptr-deref in btf_var_show()
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref in btf_var_show()
btf_var_show() calls btf_type_id_resolve() unconditionally, which
dereferences btf->resolved_ids. That is NULL for a base BTF - e.g. the
vmlinux BTF that bpf_snprintf_btf() renders against - since base BTF is
not resolved during parsing. btf_modifier_show() guards this with
'if (btf->resolved_ids)', but btf_var_show() does not.
A BPF program that passes the type_id of a BTF_KIND_VAR from the vmlinux
BTF to bpf_snprintf_btf() thus NULL-derefs:
KASAN: probably user-memory-access in range [0x46638-0x4663f]
RIP: 0010:btf_var_show (ker
bpf: Mark signal tracepoint siginfo arguments as scalar
In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark signal tracepoint siginfo arguments as scalar
The signal_generate and signal_deliver tracepoints declare their info
argument as a struct kernel_siginfo pointer. btf_ctx_access() therefore
treats it as a trusted pointer for tp_btf programs.
Signal delivery also uses SEND_SIG_NOINFO and SEND_SIG_PRIV as special
values for this argument. Those values are zero and one respectively,
and are not pointers. A tp_btf program can currently dereference either
value and fault the kernel. In particular, signal_generate can run from
timer interrupt context, turning the fault i
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
bpf: Reject resilient lock operations in rbtree callbacks
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject resilient lock operations in rbtree callbacks
__bpf_rbtree_add() keeps parent and link pointers live across calls to the
program-supplied comparison callback. The verifier therefore requires the
root's lock to remain held throughout the callback.
The helper path enforces this rule for bpf_spin_lock() and
bpf_spin_unlock(), but the resilient lock kfunc argument path does not.
Since resilient locks may protect BPF rbtree roots, a callback can release
the root lock and let another CPU remove and free the node referenced by
the in-progress tree walk. The walk then
In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark sched_process_wait argument as nullable
do_wait() passes wo->wo_pid to the sched_process_wait tracepoint.
kernel_wait4() leaves wo_pid NULL for wait4(-1), and
kernel_waitid_prepare() does likewise for waitid(P_ALL).
btf_ctx_access() currently types argument 0 as PTR_TO_BTF_ID |
PTR_TRUSTED. Without PTR_MAYBE_NULL, the verifier accepts an unchecked
dereference. Trusted pointer loads have no fault protection, so a wait for
any child can then cause a NULL pointer dereference in JITed BPF code.
Add sched_process_wait to raw_tp_null_args[] with argument 0 marked
null
In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark syscall helpers as sleepable
bpf_sys_bpf() executes the bpf(2) syscall body, which can take mutexes,
allocate with GFP_KERNEL, and wait for an RCU grace period.
bpf_sys_close() reaches close_fd() and filp_close(), which can sleep as
well.
Both helpers are limited to BPF_PROG_TYPE_SYSCALL, whose main program is
sleepable. That does not make every callback sleepable: a syscall program
can register a bpf_timer callback, and the verifier checks that callback
in a non-sleepable context while retaining the syscall helper set.
Without .might_sleep on the prototypes, su
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
ring-buffer: Add checking nr_subbufs to persistent ring buffer validation
In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Add checking nr_subbufs to persistent ring buffer validation
Sashiko reported that the code was using meta->nr_subbufs without making
sure that it matched the nr_pages + 1 on data that was assuming the two
were the same.
Add a check to the persistent ring buffer validation code to make sure
that the saved nr_subbufs matches what we expect.
nvme: remove stale namespaces by NSID range during scan
In the Linux kernel, the following vulnerability has been resolved:
nvme: remove stale namespaces by NSID range during scan
nvme_scan_ns_list() drops the stale namespaces in each gap in the
reported NSID list one NSID at a time. Every iteration calls
nvme_find_get_ns() to look the namespace up and removes it if it is
present. The loop runs once per NSID in the gap rather than once per
namespace actually present.
NSIDs are 32-bit, so a target with a sparse NSID space can make a
single gap spin the loop billions of times with nothing to remove.
watchdog: BUG: soft lockup - CPU#4 stuck for 26s!
Workqueue: nvme-wq nvme_scan_work [nvme_cor
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
ASoC: Intel: avs: Clean up the bus when fetching ML caps fails
In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Clean up the bus when fetching ML caps fails
snd_hdac_ext_bus_get_ml_capabilities() may fail and its return code
shall be checked and accounted for. Address the issue by updating the
error-path for avs_pci_probe().
At the same time, if the function in question succeeds but the next part
of avs_pci_probe() fails, the hlink list shall be cleaned up before
leaving the scope.
In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix unbalanced module reference count
strace_open() invokes try_module_get() which on success takes
the module reference. If any follow up operation causes
strace_open() to fail, the refcount shall be put down.
ASoC: Intel: avs: Refactor and fix init_config access
In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Refactor and fix init_config access
Existing code accesses enties found in ->init_configs array through
indexes that are part of ->config_ids array. Those two are limited by:
->num_init_configs and ->num_config_ids respectively. Using ID larger
or equal to ->num_init_configs leads to out-of-bounds access:
avs_path_module_send_init_configs()
loop:
(...) &acomp->tplg->init_configs[ids[i]]
^ out-of-bounds candidate
Rather than adding another if-statement, refactor the code. There is no
need to store the IDs, have a list of pointers to actual config