In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: flush works in dependency order
virtio_vsock_remove() stops the virtqueues and then flushes each work
item before freeing the enclosing virtio_vsock. The current order does
not account for dependencies between those items: tx_work may queue
send_pkt_work, and send_pkt_work may queue rx_work.
In particular, send_pkt_work can set restart_rx and release tx_lock.
The remove path can then stop the queues and flush rx_work before
send_pkt_work queues it. Although the later send_pkt_work flush waits
for that producer to finish, nothing waits for the newly queued r
w1: ds28e17: reject an oversize length on an I2C block read
In the Linux kernel, the following vulnerability has been resolved:
w1: ds28e17: reject an oversize length on an I2C block read
w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire
to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the
device. The downstream slave puts a length byte in buf[0]. The driver
then reads that many bytes into buf[1] with w1_f19_i2c_read().
buf[0] is controlled by the device and can be 0 to 255.
w1_f19_i2c_read() only rejects a zero count. The caller buffer is
I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read
run past it, up to about 222 bytes out of bounds.
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
tpm: tpm_i2c_nuvoton: disable IRQ on wait timeout
In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_i2c_nuvoton: disable IRQ on wait timeout
i2c_nuvoton_wait_for_stat() enables the IRQ before waiting for the
interrupt handler to report a status change. If the wait times out, or is
interrupted before the handler runs, the function returns without
balancing the enable_irq() call.
Disable the IRQ before leaving the failed wait path. Also preserve an
interrupted wait's original error code instead of converting it to
-ETIMEDOUT inside the helper.
sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[]
In the Linux kernel, the following vulnerability has been resolved:
sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[]
cad_pid is global, and kill_cad_pid() is only used in the root namespace.
However, due to pid_table_root_permissions(), a non-root user can unshare
pid/user namespaces and modify it from the child namespace. This makes no
sense and is simply wrong.
Move it to kern_reboot_table[] where it logically belongs; this ensures
that only GLOBAL_ROOT_UID can read/modify this sysctl.
Note that this patch doesn't preserve "#ifdef CONFIG_PROC_SYSCTL" around
the "cad_pid"; CONFIG_PROC_SYSCTL selects CONFIG_SYSCTL
smack: fix cred UAF in smack_file_send_sigiotask()
In the Linux kernel, the following vulnerability has been resolved:
smack: fix cred UAF in smack_file_send_sigiotask()
When inspecting the credentials of another task, objective credentials
(->real_cred, accessed with __task_cred()) must always be used.
Accessing ->cred on a non-current task is forbidden unless that task is
being created or destroyed; a task is allowed to change its own ->cred
pointer with no synchronization, and changing ->cred should only affect the
current syscall.
smack_file_send_sigiotask() was accessing both sets of credentials: First
tsk->cred, then __task_cred(tsk).
Fix it, always access the objective credentials
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
timekeeping: Check the return value of tk_get_aux_ts64 in __do_adjtimex()
In the Linux kernel, the following vulnerability has been resolved:
timekeeping: Check the return value of tk_get_aux_ts64 in __do_adjtimex()
If the auxiliary clock is disabled during tk_get_aux_ts64() but is enabled
before tks->clock_valid is checked, then uninitialized stackdata will be
used in the calculations and indirectly leaked to userspace.
The same race window also exists after this change and also for the core
timekeeper. But in these cases the only effect would be incorrect
adjustments and this is userspace's responsibility to avoid this.
ksmbd: fix use-after-free in oplock break notification
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in oplock break notification
smb2_oplock_break_noti() reads opinfo->conn without any lock and
dereferences it after two allocations which may sleep. When the
durable handle owning the oplock is disconnected, session_fd_check()
clears opinfo->conn and drops its conn reference under ci->m_lock, and
the last ksmbd_conn_put() frees the connection. A break triggered by
another connection that races with the teardown can then resurrect the
freed connection: ksmbd_conn_get() is a plain atomic_inc, and the
queued break work later dereferences the stale c
vlan: fix skb_under_panic and races when toggling HW VLAN offload
In the Linux kernel, the following vulnerability has been resolved:
vlan: fix skb_under_panic and races when toggling HW VLAN offload
Toggling hardware VLAN TX offload (NETIF_F_HW_VLAN_CTAG_TX or
NETIF_F_HW_VLAN_STAG_TX) on a lower device invokes vlan_transfer_features(),
which dynamically changed vlandev->hard_header_len.
This causes two issues:
1. Lockless TX paths (e.g. packet_snd in af_packet.c, ip6_finish_output2)
read dev->hard_header_len without holding RTNL lock. Mutating
hard_header_len dynamically under RTNL creates a data race where upper
layers reserve insufficient headroom based on a stale hard_header_len,
resultin
crypto: krb5 - use kfree_sensitive() for derived key buffers
In the Linux kernel, the following vulnerability has been resolved:
crypto: krb5 - use kfree_sensitive() for derived key buffers
crypto_krb5_prepare_encryption() and crypto_krb5_prepare_checksum()
free the buffer holding the freshly derived keys with plain kfree(),
leaving the key material behind in the freed slab object.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
xhci: dbgtty: Fix unregister on tty_register_driver() failure
In the Linux kernel, the following vulnerability has been resolved:
xhci: dbgtty: Fix unregister on tty_register_driver() failure
If tty_register_driver() fails, it drops the reference, but fails to set
the global dbc_tty_driver to NULL, causing the unregister to be called
again when module exits.
On module unload dbc_tty_exit() only gates its cleanup on the driver
pointer being non-NULL, so it operates on the already-freed driver:
module_init(xhci_hcd_init)
xhci_hcd_init()
xhci_dbc_init() [return value ignored]
dbc_tty_init()
tty_register_driver() fails
tty_drive
Nicht bewertetEPSS 0,16%Keine Korrektur veröffentlicht
crypto: qcom-rng - Allow zero as a random number
In the Linux kernel, the following vulnerability has been resolved:
crypto: qcom-rng - Allow zero as a random number
Zero is a valid random number and needs to be allowed. Otherwise the
output is distinguishable from random.
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: vsie: zero stale crypto bits
When shadowing crypto access bits from a format0 apcb (crycb 0 or 1),
the bits 64..255 are unchanged from whatever is in the vsie page in the
crycb and thus in the apcb. This gives a nested guest potential access
to a device no longer available. Zero out the remaining bits.
io_uring: defer eventfd signaling when queued from a wakeup handler
In the Linux kernel, the following vulnerability has been resolved:
io_uring: defer eventfd signaling when queued from a wakeup handler
io_req_local_work_add() signals the CQ ring eventfd inline when it is the
one to push the first entry onto ->work_list. For DEFER_TASKRUN rings that
add is frequently done from a waitqueue wakeup handler, where an
arbitrary waitqueue lock is held.
eventfd_signal_mask() only refuses to recurse when current->in_eventfd
is set, but that bit is set by eventfd_signal_mask() itself. If the wake
chain starts somewhere else, signal goes out inline and can feed back
into epoll.
Add IOU_F_TWQ_IN_WAKE, set it on the
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
drm/amdgpu: fix recursive ww_mutex acquire in amdgpu_devcoredump_format
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix recursive ww_mutex acquire in amdgpu_devcoredump_format
When dumping IB contents from a hung job, amdgpu_devcoredump_format()
acquired the VM root PD's reservation via amdgpu_vm_lock_by_pasid() and
then, for each IB, called amdgpu_bo_reserve() on the BO backing the IB.
Both reservations are reservation_ww_class_mutex objects and neither
used a ww_acquire_ctx, which trips lockdep:
WARNING: possible recursive locking detected
--------------------------------------------
kworker/u128:0 is trying to acquire lock:
ffff88838b16e1f0 (reservation_ww_class_m
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
HID: core: fix number/pointer type confusion on long items
In the Linux kernel, the following vulnerability has been resolved:
HID: core: fix number/pointer type confusion on long items
When fetch_item() is called by hid_scan_report() on an item with
HID_ITEM_TAG_LONG, it stores a pointer to the item data in
item->data.longdata instead of storing a value directly in
item->data.{u8/u16/u32}.
When item_udata() or item_sdata() encounters such an item, it incorrectly
assumes that the item is in short format, and therefore returns the lower
part of a kernel pointer reinterpreted as a number.
When a HID device is connected whose descriptor contains a
HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long form
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems
In the Linux kernel, the following vulnerability has been resolved:
PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
kcov: fix data corruption and race conditions on PREEMPT_RT
In the Linux kernel, the following vulnerability has been resolved:
kcov: fix data corruption and race conditions on PREEMPT_RT
syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the
temporary storage used for saving/restoring remote KCOV state is currently
allocated as the per-CPU area.
On PREEMPT_RT kernels, softirq handlers run as preemptible task threads
(e.g., ksoftirqd). If a softirq context preempts a task running a remote
KCOV session, it safely saves the task's state into the per-CPU area.
However, if that softirq thread is subsequently preempted by a higher-
priority softirq thread on the same CPU, the second so
Nicht bewertetEPSS 0,16%Keine Korrektur veröffentlicht
drm/xe: Fix DPT allocation paths.
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix DPT allocation paths.
Remove the fallback for VRAM to system memory, I tested it and that
doesn't work at all, only a black screen with pipe fault errors were
observed.
On systems with media GT, extra latency is added when accessing stolen
memory when the GT is in MC6. Since we additionally aren't counting how
much memory is used for stolen and we could in theory fill up the
entire stolen area with DPT's, avoid using stolen and only use the
default memory region.
Using stolen may also result in random system hangs under load.
(cherry picked from commit a19640
Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready
iso_conn_ready() looks up the BIS listener socket with iso_get_sock(),
which takes a reference, and then, without re-checking its state,
creates a child socket from it:
parent = iso_get_sock(hdev, ...);
if (!parent)
return;
lock_sock(parent);
sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...);
...
iso_chan_add(conn, sk, parent);
...
release_sock(parent);
sock_put(parent);
If the listener socket is closed concurrently, between iso_get_sock()
and l
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
selinux: require every boolean value to be defined
In the Linux kernel, the following vulnerability has been resolved:
selinux: require every boolean value to be defined
p_bools.nprim comes from the policy image independently of how many
booleans follow it, and cond_index_bool() fills bool_val_to_struct[] at
value - 1, so a count larger than the values present leaves NULL entries.
Every user of that array then walks it by index and dereferences each
entry: cond_evaluate_expr() on the access-vector path,
security_get_bools() and security_get_bool_value() behind selinuxfs, and
security_set_bools(). A sparse class value is absorbed by
policydb_class_isvalid() and its siblings; booleans have no