p PatchFirst

PatchFirst · Aktuelle Sicherheitslücken

Sicherheitslücken in linux-raspi · Seite 45

In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux-raspi: 755. Davon im KEV-Katalog: 0.

RSS ↗ JSON ↗
Sicherheitslücken filtern
Filter zurücksetzen

Sicherheitslücken: 10250

  1. CVE-2026-97994

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    vhost/vdpa: reject VRING_NUM larger than device max

    In the Linux kernel, the following vulnerability has been resolved: vhost/vdpa: reject VRING_NUM larger than device max vhost_vring_set_num() accepts any non-zero power-of-two queue size that fits in 16 bits. vhost-vdpa then passes that value to set_vq_num() without comparing it with get_vq_num_max(). A process with access to /dev/vhost-vdpa-* can therefore configure a queue larger than the device advertises. With vdpa_sim, the worker can walk descriptors beyond the mapped descriptor ring. KASAN reports a 16-byte out-of-bounds read, corresponding to one vring_desc, in the vringh IOTLB path: BUG: KASAN: out-of-bounds in _copy_from_iter

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  2. CVE-2026-97993

    Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht

    vhost-vdpa: don't install the eventfd_ctx_fdget() error in config_ctx

    In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: don't install the eventfd_ctx_fdget() error in config_ctx vhost_vdpa_set_config_call() swaps the eventfd_ctx_fdget() return value into v->config_ctx before checking it, so on failure the field briefly holds an ERR_PTR: ctx = fd == VHOST_FILE_UNBIND ? NULL : eventfd_ctx_fdget(fd); swap(ctx, v->config_ctx); if (!IS_ERR_OR_NULL(ctx)) eventfd_ctx_put(ctx); if (IS_ERR(v->config_ctx)) { long ret = PTR_ERR(v->config_ctx); v->config_ctx = NULL; return ret; } Commit 0bde59c1723a ("vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails") adde

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  3. CVE-2026-97992

    Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht

    vhost-vdpa: protect config_ctx from being freed under the config callback

    In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: protect config_ctx from being freed under the config callback vhost_vdpa_config_cb() loads v->config_ctx and signals it without taking a reference and without holding any lock: struct eventfd_ctx *config_ctx = v->config_ctx; if (config_ctx) eventfd_signal(config_ctx); VHOST_VDPA_SET_CONFIG_CALL replaces that field and drops what is normally the last reference to the old context: swap(ctx, v->config_ctx); if (ctx) eventfd_ctx_put(ctx); eventfd_ctx_put() drops the last kref and frees the context immediately, with no RCU grace period, so a callback th

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  4. CVE-2026-97991

    Hoch · CVSS 7.8EPSS 0,12%Keine Korrektur veröffentlicht

    vdpa_sim_blk: reject out-of-range sector starts

    In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_blk: reject out-of-range sector starts vdpasim_blk_check_range() logs an invalid start sector but continues validating the request. The subsequent unsigned capacity subtraction can underflow and let an out-of-range buffer offset reach the data path. The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT copies guest data to blk->buffer + offset through vringh_iov_pull_iotlb(), causing an out-of-bounds write in _copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from blk->buffer + offset to the guest through vringh_iov_push_iotlb(), causing an out

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  5. CVE-2026-97990

    Hoch · CVSS 7.5EPSS 0,12%Keine Korrektur veröffentlicht

    vdpa_sim_net: check TX pull result before RX copy

    In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_net: check TX pull result before RX copy vringh_iov_pull_iotlb() returns a signed byte count. A failed TX pull is currently added to the unsigned byte counter and then passed as a size_t length to receive_filter() and vringh_iov_push_iotlb(). A negative error can therefore become a large length in the RX path. Handle non-positive pull results before every length use. Count the TX error and complete the consumed TX descriptor with zero bytes. I found this bug myself, though the patch was written with AI assistance.

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  6. CVE-2026-97989

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    vduse: validate virtqueue alignment

    In the Linux kernel, the following vulnerability has been resolved: vduse: validate virtqueue alignment vduse_validate_config() only checks the upper bound of vq_align. Invalid values can therefore reach vring_create_virtqueue_map(). The split-ring helpers use align - 1 as a bit mask, so the alignment must be a non-zero power of two. A zero value makes vring_size() drop the descriptor and available-ring part and vring_init() leave the used ring pointer NULL. The VIRTIO spec requires the used ring to start at an address aligned to at least 4 bytes. Reject values below VRING_USED_ALIGN_SIZE as well as non-power-of-two values before they reac

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  7. CVE-2026-97988

    Hoch · CVSS 8.4EPSS 0,17%Keine Korrektur veröffentlicht

    vhost: invalidate vring access on IOTLB transitions

    In the Linux kernel, the following vulnerability has been resolved: vhost: invalidate vring access on IOTLB transitions When VIRTIO_F_ACCESS_PLATFORM changes, cached vring pointers and IOTLB metadata are interpreted in a different address space. Keeping them across the transition can leave stale ring mappings in use. Clearing d->iotlb before taking the VQ locks also lets a worker observe a transient NULL d->iotlb and fall back to d->umem while translating a descriptor. Add a common vhost_clear_device_iotlb() helper for vhost-net and vhost-vsock. Take all VQ mutexes in index order before dropping the device-wide IOTLB, invalidate each VQ's

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  8. CVE-2026-97987

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    virtio_input: reset device if input_register_device() fails

    In the Linux kernel, the following vulnerability has been resolved: virtio_input: reset device if input_register_device() fails Probe marks the device DRIVER_OK with virtio_device_ready() before calling input_register_device(). If registration fails, the error path cleared vi->ready and called del_vqs() while the device was still live, so the device could keep DMA to queues that were already torn down. Match remove/freeze: call virtio_reset_device() on that path before tearing down the virtqueues.

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  9. CVE-2026-97986

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    virtio_input: stop callbacks before unregistering input device

    In the Linux kernel, the following vulnerability has been resolved: virtio_input: stop callbacks before unregistering input device virtinput_remove() unregisters the input device before resetting the virtio device. virtinput_recv_events() drops vi->lock around input_event(), so clearing vi->ready does not stop a callback that passed the entry check. It can still use vi->idev, requeue buffers and kick the queue. Reset first, as virtinput_freeze() already does. With the preceding core change, reset waits for callbacks before input_unregister_device() can free vi->idev. Recheck vi->ready after taking the lock again: keep draining completed ev

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  10. CVE-2026-97985

    Mittel · CVSS 6.8EPSS 0,17%Keine Korrektur veröffentlicht

    af_unix: Update last skb marker in manage_oob().

    In the Linux kernel, the following vulnerability has been resolved: af_unix: Update last skb marker in manage_oob(). Fahad Alharbi reported that blocking recv(MSG_PEEK) could hog CPU due to OOB skb. In the following cases, manage_oob() skips OOB skb(s) and returns NULL for the last recv(MSG_PEEK): socketpair(AF_UNIX, SOCK_STREAM, 0, sk); 1) skb -> OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 2) skb -> consumed OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 1, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 3) consumed OOB skb -> OOB skb -> NULL send(sk[0],

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  11. CVE-2026-97984

    Mittel · CVSS 4.8EPSS 0,17%Keine Korrektur veröffentlicht

    net: ipv6: Fix UDP length overflow with PMTU discover and big MTU

    In the Linux kernel, the following vulnerability has been resolved: net: ipv6: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP6_MAX_MTU for UDP sockets to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IPV6_MTU_DISCOVER is set to IPV6_PMTUDISC_DO or IPV6_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce (included in the new selftest): 1. Set device MTU bigger than IP6_MAX_MTU. cork->base.fragsize will be set to that MTU in ip6_setup_cork. 2. Set IPV6_MTU_DISCOVER to IPV6_PMTUDISC_

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  12. CVE-2026-97982

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    net: ethernet: cortina: Fix budget accounting

    In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Fix budget accounting The gmac_rx() function returns the remaining NAPI budget, but its caller treats the return value as the number of packets received. An idle poll therefore reports a full budget and remains scheduled. Return the number of received packets instead. Preserve the existing free queue refill accounting by adding that count directly; continuing to subtract it from the budget would invert the refill behavior.

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  13. CVE-2026-97981

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    net: ethernet: cortina: Count dropped frames as NAPI work

    In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Count dropped frames as NAPI work The RX loop only consumes budget when it successfully delivers a frame. Error paths keep consuming descriptors without reducing the budget, so a stream of bad frames can process the entire receive ring in one poll. Move the budget accounting to a common end-of-frame path. This counts each completed frame as NAPI work whether it was delivered or dropped, matching the behavior of the vendor driver.

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  14. CVE-2026-97979

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    ice: add missing xa_destroy for sched_node_ids

    In the Linux kernel, the following vulnerability has been resolved: ice: add missing xa_destroy for sched_node_ids Commit 16dfa49406bc ("ice: Introduce new parameters in ice_sched_node") added a sched_node_ids xarray to the port info structure, but never called xa_destroy on it. Since xarrays can allocate internal memory, this can result in a memory leak even if every element in the xarray has been removed. The xarray is currently embedded in the port_info structure. This appears to have been done because its use is within functions that take the port_info as a primary argument. However, this complicates managing the lifecycle of the fie

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  15. CVE-2026-97978

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    eth: ice: don't dereference pointers from TP_printk()

    In the Linux kernel, the following vulnerability has been resolved: eth: ice: don't dereference pointers from TP_printk() After forwarding net-next during the v7.3 merge window we started seeing: TRACE EVENT ERROR: Event ice_tx_dim_work has double dereference in TP_printk: REC->q_vector->tx.tx_ring->q_index WARNING: kernel/trace/trace_events.c:420 at test_double_dereference.cold+0x39/0x4b this is due to extra checks added in tracing subsystem in commit b5cc230af5e5 ("tracing: Warn when an event dereferences a pointer in TP_printk()"). Printing happens long after the event was recorded, by which point the pointers may be invalid (the

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  16. CVE-2026-97977

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    Bluetooth: btusb: Fix UAF of btusb_data by rx_work

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix UAF of btusb_data by rx_work btusb_close() and btusb_flush() cancel data->rx_work with the asynchronous cancel_delayed_work(), so if btusb_rx_work() is already running on another CPU it keeps running after the cancel returns. btusb_disconnect() calls hci_unregister_dev(), which invokes btusb_close(), and then frees the btusb_data. A still running btusb_rx_work() then dereferences the freed data: while ((skb = skb_dequeue(&data->acl_q))) data->recv_acl(data->hdev, skb); Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also has t

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  17. CVE-2026-97975

    Mittel · CVSS 5.6EPSS 0,17%Keine Korrektur veröffentlicht

    Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del()

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del() A NULL pointer dereference in klist_put() occurs when a child device (such as a BNEP network device in bnep_session) is concurrently being unregistered while hci_conn_del_sysfs() reparents child devices. This is caused by a race condition between hci_conn_del_sysfs() and concurrent child device unregistration (e.g. bnep_session calling unregister_netdev()). During device unregistration, device_del() snapshots a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the child device using device_f

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  18. CVE-2026-97973

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    net: macb: destroy the phylink instance on the probe error path

    In the Linux kernel, the following vulnerability has been resolved: net: macb: destroy the phylink instance on the probe error path macb_mii_init() creates a phylink instance on both of its success paths, but the probe unwind frees the netdev without destroying it, so a failing macb_alloc_tieoff() or register_netdev() leaks the instance. Destroy it at err_out_unregister_mdio, which is only reachable once macb_mii_init() has succeeded, so bp->phylink is valid there.

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  20. CVE-2026-97969

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    watchdog: msc313e: Fix clock leak and spurious timer in settimeout()

    In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix clock leak and spurious timer in settimeout() msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which introduces two severe bugs: 1. If the watchdog is already active, calling start() again will increase the reference count of the clock again. However stop() is only called once, the reference count is unbalance. 2. If the watchdog is stopped, calling settimeout() will start the hardware timer accidentally. Factor out the register-writing logic into a helper function. Only call it in settimeout() if the watchdog is running

    linux-raspiBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

Prüfen Sie Ihren Server

Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.

Prüfen Sie Ihren Server →