ACPI: processor_idle: Mark LPI enter functions as __cpuidle
In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
When function tracing or Kprobes is enabled, entering an ACPI Low
Power Idle (LPI) state triggers the following RCU splat:
RCU not on for: acpi_idle_lpi_enter+0x4/0xd8
WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228
The acpi_idle_lpi_enter() function is invoked within the cpuidle
path after RCU has already been disabled for the current local CPU.
Consequently, ftrace's function_trace_call() expects RCU to be
actively watching before recording trace data, emitting
net: enetc: fix potential divide-by-zero when num_vsi is zero
In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix potential divide-by-zero when num_vsi is zero
For i.MX94 series, all the standalone ENETCs do not support SR-IOV, so
pf->caps.num_vsi is zero. This leads to a divide-by-zero in
enetc4_default_rings_allocation() when distributing rings among PF and
VFs.
Division by zero is undefined behavior in C. On ARM64, the UDIV/SDIV
instructions silently return zero rather than raising an exception, so
the issue does not cause a visible crash. However, relying on this
behavior is incorrect and poses a cross-platform compatibility risk.
Add an explicit check for num_vsi
In the Linux kernel, the following vulnerability has been resolved:
qede: fix out-of-bounds check for cqe->len_list[]
Move index check before element access.
accel/amdxdna: Fix iommu domain lifetime race during device removal
In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix iommu domain lifetime race during device removal
When force_iova mode is enabled, amdxdna_remove() frees xdna->domain. If
amdxdna_gem_obj_free() is called after device removal, it may attempt to
access xdna->domain, resulting in a use-after-free.
Fix the race by adding freeing xdna->domain as a managed release action,
so its lifetime is managed by DRM and remains valid until all managed
resources are released.
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
Sashiko found that user can cause this WARN_ON_ONCE() easily
with adding a kprobe event based on a raw address with BTF
parameter.
Since this is not an unexpected condition, remove the
WARN_ON_ONCE().
drm/xe/userptr: Hold notifier_lock for write on inject test path
In the Linux kernel, the following vulnerability has been resolved:
drm/xe/userptr: Hold notifier_lock for write on inject test path
When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit()
runs vma_check_userptr() with the svm notifier_lock taken for read. The
test injection causes vma_check_userptr() to call
xe_vma_userptr_force_invalidate(), which feeds into
xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That
flag tells drm_gpusvm_unmap_pages() the caller already holds
notifier_lock for write and only asserts the mode. Because the caller
actually holds it for read, the assertion fires:
WARNING: driver
HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait()
In the Linux kernel, the following vulnerability has been resolved:
HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait()
In picolcd_send_and_wait(), an integer overflow of the signed loop counter
'k' can theoretically lead to a NULL pointer dereference of 'raw_data'.
If the loop executes more than INT_MAX times, 'k' becomes negative,
making the condition 'k < size' true even when 'size' is 0.
Change the type of 'k' to 'unsigned int' to prevent the overflow and
eliminate the out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
[[email protected]: extended hash
HID: core: Fix OOB read in hid_get_report for numbered reports
In the Linux kernel, the following vulnerability has been resolved:
HID: core: Fix OOB read in hid_get_report for numbered reports
When a caller passes a size of 0 to hid_report_raw_event() for a
numbered report, the function originally called hid_get_report() before
performing any size validation.
Inside hid_get_report(), if the report is numbered (report_enum->numbered
is true), it unconditionally dereferences data[0] to extract the report ID.
With a size of 0, this results in an out-of-bounds read or kernel panic.
Fix this by moving the numbered report size validation check before the
call to hid_get_report(), ensuring that size is at
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read
parse_dcc() treats data_end as an inclusive end pointer, but its only
caller passes data_limit = ib_ptr + datalen, which points one past the
last valid byte.
The newline search loop iterates while tmp <= data_end, so when no
newline is present, *tmp is read at tmp == data_end, one byte beyond
the region filled by skb_header_pointer().
irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is
capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte
is uninitialized or stale; if it cont
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/lbr: Fix kernel address leakage
A user-only branch stack can contain branches that originate from
the kernel. As a result, kernel addresses are exposed to user space
even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors
supporting X86_FEATURE_AMD_LBR_V2, perf can still report SYSRET/ERET
entries for which the branch-from addresses are in the kernel.
E.g.
$ perf record -e cycles -o - -j any,save_type,u -- \
perf bench syscall basic --loop 1000 | \
perf script -i - -F brstack|tr ' ' '\n'| \
grep -E '0x[89a-f][0-9a-f]{15}'
batman-adv: gw: acquire ethernet header only after skb realloc
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: gw: acquire ethernet header only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
batman-adv: dat: acquire ARP hw source only after skb realloc
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: acquire ARP hw source only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
batman-adv: dat: ensure accessible eth_hdr proto field
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: ensure accessible eth_hdr proto field
When batadv_get_vid() accesses the proto field of the ethernet header, it
is not checking if the data itself is accessible. The caller is responsible
for it. But in contrast to other call sites, batadv_dat_get_vid() and its
caller didn't make sure this is true. This could have caused an
out-of-bounds access.
In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix out-of-bounds read in decompress_lznt
decompress_lznt() does not validate array index bounds before accessing
the decompression table. A corrupted NTFS3 image with invalid compressed
data can trigger an out-of-bounds read.
Add index bounds checking to prevent the OOB access.
mtd: maps: vmu-flash: fix NULL pointer dereference in initialization
In the Linux kernel, the following vulnerability has been resolved:
mtd: maps: vmu-flash: fix NULL pointer dereference in initialization
The mtd_info contains a struct device, which must be linked to its
parent. Without this, the initialization of the MTD fails with a NULL
pointer dereference.
Input: ims-pcu - only expose sysfs attributes on control interface
In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - only expose sysfs attributes on control interface
When the driver was converted to use the driver core to instantiate device
attributes (via .dev_groups in the usb_driver structure), the attributes
started appearing on all interfaces bound to the driver. Since the ims-pcu
driver manually claims the secondary data interface during probe, the
driver core automatically creates the sysfs attributes for that interface
as well.
However, the driver only supports these attributes on the primary control
interface. Data interfaces lack the necessary descriptors and
In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - add response length checks
The driver processes response data from device buffers without verifying
that the device actually sent enough data. This can lead to
out-of-bounds reads or processing stale data.
Add checks for the expected response length before accessing the
buffers.
Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing
In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing
The driver parses CDC union descriptors in ims_pcu_get_cdc_union_desc()
by iterating through the extra descriptor data. However, it does not
verify that the bLength of each descriptor is at least 2. A malicious
device could provide a descriptor with bLength = 0, leading to an
infinite loop in the driver.
Add a check to ensure bLength is at least 2 before proceeding with
parsing.
hwmon: (asus_atk0110) Check package count before accessing element
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (asus_atk0110) Check package count before accessing element
atk_ec_present() walks the management group package returned by the GGRP
ACPI method and, for each sub-package, reads its first element:
id = &obj->package.elements[0];
if (id->type != ACPI_TYPE_INTEGER)
without checking that the sub-package is non-empty. ACPICA allocates the
element array with exactly package.count entries, so for a sub-package
with a zero count this reads past the allocation.
The sibling function atk_debugfs_ggrp_open() performs the same access but
skips empty packages with a package
samples/damon/mtier: fail early if address range parameters are invalid
In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: fail early if address range parameters are invalid
The comment on top of `struct damon_region` clearly says that
For any use case, @ar should be non-zero positive size.
which is now verified in damon_verify_new_region() if the kernel is built
with DAMON_DEBUG_SANITY.
The WARN_ONCE() can be triggered if the mtier sample module is enabled
before node{0,1}_{start,end}_addr have been properly initialized, which is
obviously not good.
------------[ cut here ]------------
start 0 >= end 0
WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118,