media: saa7164: fix cleanup on resource allocation failure
In the Linux kernel, the following vulnerability has been resolved:
media: saa7164: fix cleanup on resource allocation failure
saa7164_dev_setup() adds the device to the global saa7164_devlist before
requesting the PCI BAR memory regions.
If get_resources() fails, saa7164_dev_setup() decrements the device count
and returns an error, but leaves the device on saa7164_devlist. The probe
error path then frees the device, leaving a dangling entry on the global
list.
Reuse the existing MMIO mapping error path to remove the device from
saa7164_devlist and decrement the device count before returning.
Also release BAR0 if it was successfully requ
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
media: tda18250: fix possible integer overflow
In the Linux kernel, the following vulnerability has been resolved:
media: tda18250: fix possible integer overflow
Integer overflow may occur, when variable exp equals to zero. Result
of shift 1 << (exp - 1) may then leads to undefined behavior.
media: ti: vpe: quiesce overflow recovery before freeing streams
In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: quiesce overflow recovery before freeing streams
The VIP overflow recovery worker is armed from the hardirq handler when a
FIFO overflow is detected, and the list-complete path looks the stream up
through the VPDMA list private pointer. Both keep touching stream, port
and device state; the recovery worker also resets the parser and VPDMA,
repopulates the descriptor list, and re-enables the per-list IRQs.
vip_stop_streaming() masks and clears the per-list IRQs, but it neither
synchronizes the hardirq handler nor disables recovery_work. An overflow
IRQ that h
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
media: v4l2-async: avoid deleting unlinked ASC entry on link error
In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-async: avoid deleting unlinked ASC entry on link error
v4l2_async_match_notify() creates ancillary media links before adding
asc->asc_subdev_entry to sd->asc_list.
If ancillary link creation fails, the function jumps to
err_call_unbind while asc_subdev_entry has not been linked yet. Async
connections are zero-allocated, so the list entry still has NULL next
and prev pointers on this path. Calling list_del() on it can therefore
dereference NULL instead of returning the original link creation error.
Do not delete asc_subdev_entry from err_call_unbind. There is n
In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-ctrls: validate HEVC EXT SPS RPS counts
The HEVC SPS control carries the short-term and long-term RPS counts
that decoder drivers use to walk the matching EXT SPS dynamic arrays.
Reject SPS values that exceed the HEVC limits of 64 short-term sets and
32 long-term references so drivers cannot later index beyond those
controls.
Also reject EXT SPS ST RPS entries whose negative or positive picture
counts exceed the 16-entry arrays, or whose combined delta-POC count
exceeds the HEVC DPB maximum.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
media: v4l2-fwnode: Fix fwnode leak in v4l2_fwnode_parse_link
In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-fwnode: Fix fwnode leak in v4l2_fwnode_parse_link
In v4l2_fwnode_parse_link(), the remote endpoint fwnode reference is
acquired using fwnode_graph_get_remote_endpoint(). This reference is
properly released in the error paths, but it is leaked on the success
path.
Add the missing fwnode_handle_put() before returning 0 to prevent the
reference leak.
[Sakari Ailus: Fix subject prefix and coding style a little.]
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure
In the Linux kernel, the following vulnerability has been resolved:
media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure
kthread_run() returns an ERR_PTR on failure, not NULL.
When start_streaming() fails, data->kthread_vid_cap is left holding
this error pointer instead of being cleared.
This causes two subsequent bugs:
1. A future call to start_streaming() sees a non-NULL kthread_vid_cap
and returns 0 (success) immediately, without actually starting the
capture thread.
2. A call to stop_streaming() checks 'kthread_vid_cap == NULL' which
is false for an error pointer, and proceeds to call kthread_stop()
media: zoran: Avoid freeing a registered video_device twice
In the Linux kernel, the following vulnerability has been resolved:
media: zoran: Avoid freeing a registered video_device twice
zoran_init_video_device() installs zoran_vdev_release() as the
video_device release callback through zoran_template. After
video_register_device() succeeds, video_unregister_device() drops the
registered video_device reference and the V4L2 core eventually invokes
that release callback, which kfree()s the video_device.
zoran_exit_video_devices() called video_unregister_device() and then
kfree(zr->video_dev), so device teardown could free the same
video_device twice.
Remove the direct kfree() and clear the cached p
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
media: qcom: iris: use disable_irq() during power-off
In the Linux kernel, the following vulnerability has been resolved:
media: qcom: iris: use disable_irq() during power-off
The IRQ is registered as a threaded IRQ.
Using disable_irq_nosync() in iris_vpu_power_off() does not wait
for an already queued threaded IRQ handler to complete before
returning.
As a result, a threaded IRQ handler may still run after the VPU has
been powered down and access hardware registers after power-off.
Replace disable_irq_nosync() with disable_irq() so the power-off path
waits for any in-flight threaded IRQ handler to complete before
returning.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
media: chips-media: wave5: Add timeout while stop_streaming
In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Add timeout while stop_streaming
When stop_streaming is called, an infinite loop may occur in some cases.
Add a bounded poll of the queue status: loop until the queues drain,
sleeping briefly between polls, and bail out once VPU_DEC_STOP_TIMEOUT
elapses.
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
media: chips-media: wave5: Defer job_finish() only when a DEC_PIC was queued
In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Defer job_finish() only when a DEC_PIC was queued
Decoder instances sharing a VPU also share one v4l2_m2m job slot, released
when the running context calls v4l2_m2m_job_finish(). While draining,
device_run() defers job_finish() once EOS is sent (sent_eos), expecting a
later finish_decode() (from a DEC_PIC completion IRQ) to release the slot.
But the m2m core checks job_ready() only when a job is queued, not when it
is dispatched. A job queued while draining can run after finish_decode()
has already moved the instance to STOP and sent EOS. device_
media: chips-media: wave5: Resume device before setting EOS flag
In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Resume device before setting EOS flag
Setting the EOS flag talks to the firmware via send_firmware_command(),
which accesses VPU registers. Both the STREAMOFF path
(wave5_vpu_dec_job_abort()) and the V4L2_DEC_CMD_STOP path
(wave5_vpu_dec_stop()) can run while the device is runtime suspended, so
those register accesses hit powered-down hardware and the SoC raises an
asynchronous SError, panicking the kernel:
SError Interrupt on CPU3, code 0x00000000bf000000 -- SError
send_firmware_command+0x2c/0x160 [wave5]
wave5_vpu_dec_set_bitstream_flag
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE
(256-byte) bounce buffer obtained from dma_pool_alloc(), which does not
zero the allocation. They initialize only a few leading bytes before
handing the buffer to qla2x00_write_sfp().
qla2x00_write_sfp() can override the transfer length with a user-supplied
value:
if (len == 1)
opt |= BIT_0;
if (opt & BIT_0)
len = *sfp;
*sfp is the first byte of the (user-controlled) payload, so len can grow
up to 255. The device then DMA-reads len bytes f
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
struct qla_i2c_access carries a 16-bit length field alongside a fixed
64-byte buffer:
struct qla_i2c_access {
uint16_t device, offset, option, length;
uint8_t buffer[0x40];
} __packed;
qla2x00_write_i2c() and qla2x00_read_i2c() use the user-supplied
i2c->length without any bounds check. i2c is overlaid on a 256-byte
on-stack buffer and sfp is a 256-byte DMA-pool buffer, so a length up to
65535 overruns both:
- write: memcpy(sfp, i2c->buffer, i2c->length) over-reads the stack and
over-writes the sfp heap bu
scsi: qla2xxx: edif: Fix NULL pointer deref in RX SA delete check
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: edif: Fix NULL pointer deref in RX SA delete check
qla_chk_edif_rx_sa_delete_pending() obtains the SCSI command via
GET_CMD_SP(sp) and immediately dereferences cmd->sc_data_direction.
That command pointer can be NULL: the firmware may post a status
completion for a command that has already been returned or aborted. The
caller qla2x00_status_entry() acknowledges this on the very same status
path, re-fetching GET_CMD_SP(sp) and bailing out with the "Command
already returned" message when it is NULL -- but that check runs only
after qla_chk_edif_rx_sa_delete_pe
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix BSG job leak on validate flash image error path
qla28xx_validate_flash_image() returns QLA_SUCCESS (0) unconditionally,
telling the FC BSG transport (fc_bsg_host_dispatch()) that the driver
owns and will complete the request. But bsg_job_done() is guarded by "if
(!rval)", so on the error path (rval == -EINVAL) neither the driver nor
the transport completes the job. The request dangles until it times out,
leaking block layer resources.
Commit c2c68225b145 ("scsi: qla2xxx: Fix bsg_done() causing double
free") added the "if (!rval)" guard to a batch of BSG
scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition()
In the format 1 path, the virtual port is located on ha->vp_list while
holding vport_slock, but the lock is dropped before vp is used:
qla_update_host_map() is called and VP_IDX_ACQUIRED/REGISTER_FC4_NEEDED/
REGISTER_FDMI_NEEDED are set on vp. No reference is taken across that
window, so a concurrent qla24xx_deallocate_vp_id() can tear the vport
down and free it, leading to a use-after-free.
Take a vport reference (vref_count) under vport_slock when the matching
vp is found, and drop it after the last u
scsi: qla2xxx: Initialize NVMe abort_work once at submission
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Initialize NVMe abort_work once at submission
qla_nvme_fcp_abort() and qla_nvme_ls_abort() ran INIT_WORK() on
priv->abort_work immediately before schedule_work(). INIT_WORK()
reinitializes the work_struct, resetting its list head and clearing the
pending bit. If an abort is issued more than once for the same command
(for example, concurrent transport teardown and a timeout-driven abort),
the second INIT_WORK() reinitializes a work item that is already queued,
which can corrupt the workqueue list and lead to crashes or a looping
worker.
Initialize priv->abort
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak
qla2x00_do_dport_diagnostics() allocates the qla_dport_diag response
buffer with kmalloc_obj() (non-zeroing) and, on success, copies the full
sizeof(*dd) back to user space via sg_copy_from_buffer(). The inbound
sg_copy_to_buffer() only fills as many bytes as the user request payload
provides, and qla26xx_dport_diagnostics() zeroes only dd->buf. The
options and unused[] fields are therefore copied out uninitialized,
leaking kernel heap contents to user space.
Allocate with kzalloc_obj(), matching qla2x00_do_dp
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions()
qla2x00_update_fru_versions() copies the user-supplied BSG request into
a fixed 256-byte stack buffer (bsg[DMA_POOL_SIZE]) and then iterates
list->count times over the qla_image_version array embedded in that
buffer, advancing the image pointer each iteration. count is taken
directly from user input with no upper bound, while only (DMA_POOL_SIZE
- sizeof(list->count)) / sizeof(struct qla_image_version) = 6 entries
actually fit. A larger count walks the image pointer off the end of the
stack buffer, reading ad