Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
net/packet: clear RX owner on VNET header error
In the Linux kernel, the following vulnerability has been resolved:
net/packet: clear RX owner on VNET header error
Commit 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race
condition") added rx_owner_map and made tpacket_rcv() claim a V1 or V2
ring slot before converting the virtio-net header. If the conversion
fails, the drop path leaves the slot claimed.
With a one-frame TPACKET_V2 ring, an unsupported UDP GSO packet leaves
the only slot unavailable, so the ring also drops the next valid packet.
Clear the ownership bit on this error path. TPACKET_V3 already clears
its block state here.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable()
In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable()
scsi_cdl_enable() uses length fields returned by MODE SENSE to locate
the ATA feature mode page in a 64-byte stack buffer. A target can report
a total length shorter than its mode header and block descriptors. The
unsigned subtraction used for the MODE SELECT length can wrap, and the
separately computed buf_data can point beyond buf.
During automatic scan, enable is false, so the read-modify-write of
buf_data[4] can clear the low two bits of a target-selected
out-of-bounds stack byte. scsi_mode_select() can then
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
xfrm: serialize state GC with device state flush
In the Linux kernel, the following vulnerability has been resolved:
xfrm: serialize state GC with device state flush
The deferred-device pass in xfrm_dev_state_flush() finds states under
xfrm_state_dev_gc_lock, but drops the lock before calling
xfrm_dev_state_free() because the driver callback may sleep. The device
GC list does not hold an xfrm_state reference, so the state GC worker can
destroy the same state concurrently.
The race can proceed as follows:
CPU 0 CPU 1
find x on the device GC list
drop xfrm_state_dev_gc_lock
read x->xso.dev
xfrm_state_gc_destroy(x
xfrm: use hlist_del_init_rcu for state_cache and state_cache_input
In the Linux kernel, the following vulnerability has been resolved:
xfrm: use hlist_del_init_rcu for state_cache and state_cache_input
Commit 14acf9652e56 ("xfrm: defensively unhash xfrm_state lists in
__xfrm_state_delete") converted bydst/bysrc/byseq/byspi from
hlist_del_rcu() to hlist_del_init_rcu() so that a second
__xfrm_state_delete() on the same object becomes a no-op rather than a
write through LIST_POISON pprev. It missed state_cache and
state_cache_input, which kept hlist_del_rcu():
- hlist_del_rcu() leaves pprev = LIST_POISON2 (non-NULL), so
hlist_unhashed() returns false.
- hlist_del_init_rcu() leaves pprev = NULL, so hlist_un
In the Linux kernel, the following vulnerability has been resolved:
xfrm: save input state data before secpath resets
xfrm_input() stores the current xfrm_state in the skb secpath while it
continues receive-side processing. Some input paths can reset that secpath
before xfrm_input() has finished dereferencing the state.
Receive callback users such as VTI and XFRM interfaces can reset the
secpath. The VTI receive path does so before checking whether the packet
crosses network namespaces, while the XFRM interface path does so only for
cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also
reset the secpath before the final d
mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ
In the Linux kernel, the following vulnerability has been resolved:
mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ
On I6500 CPU cores, lld and scd give no ordering guarantees (same as all
other instructions). To respect the assumption that arch_cmpxchg() is
fully ordered, we must inject sync instructions above and below our
lld/scd loops using the already in place WEAK_REORDERING_BEYOND_LLSC
infrastructure.
Otherwise, bad things can happen:
[ 34.054496] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000000, epc == a80000080838e01c, ra == a80000080838dfc4
[ 34.054559] Oops[#1]:
[ 34.069561
memstick: ms_block: destroy io_queue workqueue on removal
In the Linux kernel, the following vulnerability has been resolved:
memstick: ms_block: destroy io_queue workqueue on removal
msb_init_disk() creates the per-card ordered workqueue msb->io_queue with
alloc_ordered_workqueue(). It is torn down with destroy_workqueue() only
on the init error path; msb_remove() never destroys it. msb_stop() merely
flushes the queue, and neither msb_data_clear() nor put_disk() free it. As
a result every card insert/remove cycle leaks the workqueue and its
kworker, exhausting kernel memory over repeated cycles.
Destroy the workqueue in msb_remove() after the disk has been removed and
the queue drained.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count
In the Linux kernel, the following vulnerability has been resolved:
mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count
SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter,
and is meant to sit above any value that counter can reach. However, it
is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system
with 4 KiB pages the flag collides with the usage count once that count
reaches 4 TiB.
swap_usage_in_pages() masks bit 30 out, so whenever the real count has
that bit set, every caller of it reads 4 TiB low:
* /proc/swaps understates Used by 4 TiB.
* A raw count of exactly 2^30 masks to zer
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
mm/vma: correctly unaccount on mmap_prepare() failure
In the Linux kernel, the following vulnerability has been resolved:
mm/vma: correctly unaccount on mmap_prepare() failure
__mmap_setup() accounts memory for relevant mappings via:
security_vm_enough_memory_mm()
-> __vm_enough_memory()
-> vm_acct_memory()
If __mmap_setup() fails, this indicates that this accounting did not take
place, and thus it's appropriate for __mmap_region() to jump to
abort_munmap.
However if call_mmap_prepare() fails, it also jumps there and any accounted
memory is not correctly unaccounted.
Fix this by handling each error separately.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
mm: filemap: retain mapped dropbehind folios
In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: retain mapped dropbehind folios
Fault-around can map ready dropbehind folios without going through the
normal page-cache lookup that clears dropbehind. A mapping represents a
competing cached user, so retain the folio instead of forcibly unmapping
it when writeback completes.
For a mapped folio, folio_unmap_invalidate() can call
unmap_mapping_folio(), which takes i_mmap_rwsem and may sleep. Retaining
mapped folios avoids this path when folio_end_dropbehind() runs in
non-preemptible task context.
Tal was able to trigger a sleeping-in-atomic warning due to th
KEYS: encrypted: fix integer overflow of datablob_len
In the Linux kernel, the following vulnerability has been resolved:
KEYS: encrypted: fix integer overflow of datablob_len
encrypted_key_alloc() stores datablob_len in a u16. It is computed from
multiple string and payload lengths. If the result exceeds U16_MAX, the
assignment truncates the allocation size. KASAN reports a 32760-byte
slab-out-of-bounds write when __ekey_init() copies the master key
description into the undersized buffer.
The total payload length stored in key->datalen is also a u16. Use
check_add_overflow() to reject values that do not fit either destination,
and use kzalloc_flex() for the flexible-array allocation.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
KEYS: trusted: Fix tpm2_load_cmd() boundary check
In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix tpm2_load_cmd() boundary check
tpm2_load_cmd() does boundary checks against the ASN.1 size i.e.,
payload->blob_len. Address this by passing the decoded blob size to
tpm2_load_cmd(), and use it for the boundary checks.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
i2c: atr: fix dangling adapter pointer on add failure
In the Linux kernel, the following vulnerability has been resolved:
i2c: atr: fix dangling adapter pointer on add failure
i2c_atr_add_adapter() stores atr->adapter[chan_id] before
i2c_add_adapter() so that the I2C bus notifier can match child clients
during registration. On failure the channel is freed but the slot was
left pointing at freed memory, which can lead to use-after-free in
i2c_atr_del_adapter() / cleanup and also block reuse with -EEXIST.
Clear the slot on the i2c_add_adapter() error path before freeing chan.
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
In the Linux kernel, the following vulnerability has been resolved:
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
register_pkey_tree() ignores errors from register_one_pkey_tree() and
continues registering the remaining slaves. The per-slave error path has
already released the pkey parent kobjects, but their pointers remain
stored in the device. A later device cleanup therefore passes the stale
pointers to kobject_put(), causing a use-after-free.
Clear the parent pointers after releasing a failed slave tree and skip
unregistered trees during device cleanup. This preserves the existing
best-effort registration behavior whil
In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Fix the PIO_CRED credit-return mmap
hfi1_file_mmap()'s PIO_CRED case must hand user space the single
credit-return page that holds this context's entry. That page is the
second or third page of the per-node credit-return allocation once the
hardware send context index reaches 64 or 128, so the failure below is
intermittent: when the entry lands on the first page the offset is zero
and everything works.
Two things are wrong.
First, cr_page_offset is a byte offset but .va is a struct
credit_return *, so adding it is pointer arithmetic and scales the offset
by size
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
selinux: preserve user SID across nested backing files
In the Linux kernel, the following vulnerability has been resolved:
selinux: preserve user SID across nested backing files
SELinux saves the user file SID in a backing-file security blob so it
remains available after mmap() replaces vma->vm_file with a backing file.
For nested backing files (overlayfs over overlayfs, or FUSE passthrough
backed by overlayfs), user_file may itself be a backing file. Its
fsec->sid is the SID of the mounter that opened it, rather than the user
that opened the top-level file. mprotect() then checks fd { use } against
the mounter SID. This can incorrectly deny access without a domain
transition, or check the
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
selinux: recheck intermediate backing files on mprotect()
In the Linux kernel, the following vulnerability has been resolved:
selinux: recheck intermediate backing files on mprotect()
mprotect() can be used to bypass the SELinux checks that mmap() performs
against the intermediate layers of a stacked filesystem.
mmap() checks every backing layer as the request descends through the
stack. mprotect() only has the lowest backing file in vma->vm_file, so it
rechecks the top-level user and the lowest mounter, but skips the mounters
of every layer in between. With two nested overlayfs mounts and a policy
denying mounter_t -> middle_file_t:file { execute }, a direct
mmap(PROT_EXEC) is denied:
avc:
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
mmc: core: Cancel SDIO IRQ work before freeing host
In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Cancel SDIO IRQ work before freeing host
A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work
from its interrupt handler. That work is only cancelled on the suspend
path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed
just before the controller freed its IRQ can run after
mmc_host_classdev_release() has freed the host and dereference it through
container_of().
Cancel host->sdio_irq_work in mmc_free_host(), like the existing
host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel
delayed work before releasi
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
mmc: hsq: Fix use-after-free in retry work
In the Linux kernel, the following vulnerability has been resolved:
mmc: hsq: Fix use-after-free in retry work
mmc_hsq_pump_requests() queues retry_work when request_atomic() returns
-EBUSY; today sdhci-sprd is the only consumer that implements
request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but
is never cancelled during driver removal. Work still pending at unbind
can therefore run after the devm allocation has been released and
dereference hsq->mmc and hsq->mrq.
Use devm_work_autocancel() to cancel and drain retry_work before the devm
allocation is released. By the time devres cleanup begins,
mmc_remove_host() has alr
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
mmc: mmci: Fix use-after-free in busy-timeout work
In the Linux kernel, the following vulnerability has been resolved:
mmc: mmci: Fix use-after-free in busy-timeout work
ux500_busy_complete() can queue ux500_busy_timeout_work for an R1b
command, but mmci_remove() never cancels it. The work can subsequently
dereference the devm-allocated mmci_host after it has been released.
Mask the controller interrupts and disable the delayed work during
removal. This drains any queued instance and stops an IRQ handler that
is still in progress from queueing the work again once it has been
disabled.
This issue was found by an in-house static analysis tool.