PatchFirst · Aktuelle Sicherheitslücken
In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux-oem-7.0: 993. Davon im KEV-Katalog: 0.
Sicherheitslücken: 6226
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments Make sure we don't end-up with a num_frags = 0 situation. For that, check that the required size is not 0 and put a checker on num_frags as well.
In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Avoid stack over-read in debug output helpers host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which returns the length the formatted string would have reached with an unbounded buffer. That return value was passed straight to o->fn as the number of bytes to emit. This could cause a read past end of the output buffer if a call to host1x_debug_* produced a string longer than 256 bytes. This only affected the debugfs files as the printk debug sink ignores the number of bytes. In practice, this is very unlikely to occur. Fix by switching to vscnpr
In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix task_struct reference leak in recover_worker get_pid_task() increments the task reference count, but the corresponding put_task_struct() was missing in the else branch, leaking a reference on every GPU hang recovery. Patchwork: https://patchwork.freedesktop.org/patch/730662/
In the Linux kernel, the following vulnerability has been resolved: drm/msm: Only fini scheduler after successful init msm_ringbuffer_new() destroys a partially initialized ring through msm_ringbuffer_destroy() when an allocation or scheduler setup step fails. If drm_sched_init() fails before it finishes initializing the scheduler, the failure path still calls drm_sched_fini(). That teardown path assumes the scheduler work items, lists, and workqueue state were initialized. Track successful scheduler initialization and call drm_sched_fini() only after drm_sched_init() returned 0. This issue was found by a static analysis checker and conf
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: remove broken string configfs attributes The UAC1_STR_ATTRIBUTE macro defines configfs show/store handlers for the fn_play, fn_cap, and fn_cntl string options. The store function contains an inverted null check on the kstrndup() return value. This means every write attempt returns -ENOMEM on success and dereferences a NULL pointer on allocation failure. The attributes have been broken and unused for many years. Remove the UAC1_STR_ATTRIBUTE macro and the three attributes it generated. The internal defaults (FILE_PCM_PLAYBACK, FILE_PCM_CAPTURE,
In the Linux kernel, the following vulnerability has been resolved: UDF symlink pathComponent header OOB read udf_symlink_filler() can enter udf_pc_to_char() with a partial pathComponent header. Validate that enough input remains for a complete pathComponent header before accessing it. Reject malformed symlink data that would otherwise make udf_pc_to_char() perform an out-of-bounds read.
In the Linux kernel, the following vulnerability has been resolved: uio: Fix stale info pointer in failed registration path After device_add(), the UIO device is visible to userspace and /dev/uioX can be opened. If a later setup step fails, __uio_register_device() unwinds the device but leaves idev->info pointing at the caller-owned struct uio_info. That is unsafe when an opener races with the failed registration path. The open file keeps a reference to the uio_device, while the caller sees registration failure and may free its struct uio_info. Later file operations can then follow idev->info and dereference freed memory. Handle post-devi
In the Linux kernel, the following vulnerability has been resolved: speakup: keyhelp: guard letter_offsets possible out-of-range indexing help_init() builds letter_offsets[] by using the first byte of each function name as an index via `(start & 31) - 1`. If function_names are overridden from sysfs (root) with a name starting outside [a–z], the index underflows or exceeds the array, leading to OOB write. Function names can be overridden with the following commands as root: modprobe speakup_soft echo "0 _bad" > /sys/accessibility/speakup/i18n/function_names # then press Insert+2 on /dev/tty This fix checks the first letter in
In the Linux kernel, the following vulnerability has been resolved: misc: bcm-vk: Use acquire/release for msgq_inited bcm_vk_sync_msgq() fills the message queue information and then sets msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the message queues and their cached queue information. atomic_set()/atomic_read() do not order those accesses. A reader can see msgq_inited set while still seeing stale queue information. Use release when publishing the initialized queues and acquire when checking the gate. Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the gate and does not publish queue state to read
In the Linux kernel, the following vulnerability has been resolved: misc: ad525x_dpot: use driver core groups for sysfs files ad_dpot_probe() creates per-RDAC sysfs files manually and then optionally creates the command sysfs group. This leaves probe responsible for rolling back partial sysfs state and makes remove responsible for matching every file that probe created. Move the device attributes into driver core dev_groups for the I2C and SPI drivers and use an is_visible() callback to expose only the attributes supported by the probed device. With this shape, the driver core creates the sysfs files only after probe succeeds and removes t
In the Linux kernel, the following vulnerability has been resolved: ipack: ipoctal: fix UAF, null-ptr-deref, and use-after-free in cleanup on remove Three issues arise when the device is removed while a tty session is still active: 1. UAF of struct ipoctal: the remove callback frees ipoctal via kfree() while tty ops may still access it. Fix by introducing kref-based lifetime management — kref is taken in install() when a tty is opened and released in cleanup() when the tty is finally destroyed; remove() uses kref_put() instead of kfree(). 2. NULL dereference in ipoctal_write_tty(): __ipoctal_remove() frees xmit_buf via tty
In the Linux kernel, the following vulnerability has been resolved: mtd: mtdswap: Avoid freeing registered blktrans device twice In mtdswap_add_mtd(), debugfs setup failure after successful blktrans registration can free mbd_dev twice. add_mtd_blktrans_dev() initializes the blktrans device reference and publishes the disk. Once that succeeds, del_mtd_blktrans_dev() tears the disk down and drops the blktrans reference; when that reference reaches zero, blktrans_dev_release() frees the mtd_blktrans_dev. The debugfs failure path called del_mtd_blktrans_dev(mbd_dev), then fell through the common cleanup label and called kfree(mbd_dev) again.
In the Linux kernel, the following vulnerability has been resolved: mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition() mtd_add_partition() does not reject the special offset value MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in add_mtd_device() when called through the BLKPG ioctl on NAND devices. The RETAIN value depends on cur_offset being the end of the previous partition, but in the dynamic partition path cur_offset equals the offset argument itself, causing undefined behavior. Commit 5daa7b21496a ("mtd: prepare partition add and del functions for ioctl requests") introduced mtd_add_partition() and correctly rejected MTDPA
In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Associate BOs with every job that accesses them A submission can expand into a chain of jobs (e.g. bin + render + cache clean). Implicit synchronization in v3d_submit_lock_reservations() is gated on each job's bo[], but the BO list was only ever attached to the last job of the chain. When that last job is a trailing CACHE_CLEAN job, the job that actually consumes the BOs (that is, a RENDER or CSD job) was left with bo_count == 0 and picked up no implicit dependencies. It could therefore be dispatched to the hardware and read a BO while another context was still wri
In the Linux kernel, the following vulnerability has been resolved: software node: Fix software_node_get_reference_args() with index -1 The bounds check for the index passed to software_node_get_reference_args() was failing when passed UINT_MAX, this in turn would lead to an out of bound access in the property array. Fix the bound check to also cover the UINT_MAX case.
In the Linux kernel, the following vulnerability has been resolved: bpf: Reject arena frees below the arena base bpf_arena_free_pages() accepts scalar arena addresses. The runtime masks the address to the low 32 bits and reconstructs a full user address from the arena base before returning the range to the arena free tree. When the scalar value is below the low 32 bits of the arena base, full_uaddr falls below user_vm_start. The existing upper-end clipping then turns this into an out-of-range free-tree offset. A later allocation can reuse that offset and return an address below the arena mapping. Reject such frees before computing the cli
In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for arena-related insns Since the interpreter does not support the arena-related insns, interpreter fallback should not be allowed for these insns in core.c::__bpf_prog_select_runtime(). Currently, when the interpreter executes the arena ST/LDX/STX insns, it would hit the BUG_ON() in ___bpf_prog_run() at run time. [ 2.579196] BPF interpreter: unknown opcode a2 (imm: 0x0) [ 2.579998] ------------[ cut here ]------------ [ 2.580652] kernel BUG at kernel/bpf/core.c:2349! [ 2.581314] Oops: invalid opcode: 0000 [#1] SMP PTI Set j
In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for gotox insn The interpreter does not recognize the BPF_JMP|BPF_JA|BPF_X insn, which is used for insn_array map. Thereafter, it would hit the BUG_ON() in ___bpf_prog_run() at run time. [ 2.563726] BPF interpreter: unknown opcode 0d (imm: 0x0) [ 2.564557] ------------[ cut here ]------------ [ 2.565206] kernel BUG at kernel/bpf/core.c:2349! [ 2.565882] Oops: invalid opcode: 0000 [#1] SMP PTI Set jit_required as true when insn_array map is used in the prog in order to disallow interpreter fallback for gotox insn in core.c::__
In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Terminate all descriptors without callbacks The DMA Engine client documentation says in the "Terminate APIs" section of Documentation/driver-api/dmaengine/client.rst: "No callback functions will be called for any incomplete transfers." dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches the interrupt handler. This schedules a callback for the active descriptor and leaves other issued or submitted descriptors queued. A late callback after dmaengine_terminate_sync() can dereference client state that has already been freed, while le
In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize abort state updates dw_edma_abort_interrupt() drops vc.lock before changing request and status. issue_pending() can acquire the lock in that small window, observe the old busy state, and skip starting queued descriptors. Then the abort handler overwrites the channel status as idle, leaving the new descriptors stranded for good. Keep descriptor completion and the state transition in the same critical section.
Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.