p PatchFirst

PatchFirst · Aktuelle Sicherheitslücken

Sicherheitslücken in linux-gcp · Seite 94

In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux-gcp: 394. Davon im KEV-Katalog: 0.

Sicherheitslücken filtern
Filter zurücksetzen

Sicherheitslücken: 6847

  1. CVE-2026-63928

    Hoch · CVSS 7.8EPSS 0,17%Keine Korrektur veröffentlicht

    USB: serial: omninet: fix memory corruption with small endpoint

    In the Linux kernel, the following vulnerability has been resolved: USB: serial: omninet: fix memory corruption with small endpoint Make sure that the bulk-out buffers are at least as large as the hardcoded transfer size to avoid user-controlled slab corruption should a malicious device report a smaller endpoint max packet size than expected.

    Veröffentlicht Aktualisiert
  2. CVE-2026-63924

    Kritisch · CVSS 9.8EPSS 0,71%Keine Korrektur veröffentlicht

    ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()

    In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up.

    Veröffentlicht Aktualisiert
  3. CVE-2026-63922

    Kritisch · CVSS 9.8EPSS 0,71%Keine Korrektur veröffentlicht

    ipv6: exthdrs: refresh nh after handling HAO option

    In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh after handling HAO option ip6_parse_tlv() caches skb_network_header(skb) in nh while walking IPv6 TLVs. ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can move the skb head and invalidate the cached network header pointer. Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs are parsed from the current skb head. This matches the existing pattern used in ip6_parse_tlv() after helpers that can modify skb header storage.

    Veröffentlicht Aktualisiert
  4. CVE-2026-63921

    Hoch · CVSS 8.8EPSS 0,16%Keine Korrektur veröffentlicht

    ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate().

    In the Linux kernel, the following vulnerability has been resolved: ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate(). After patch 1/2 in this series, vti6_update() unlinks and relinks the tunnel through t->net. vti6_siocdevprivate() still uses dev_net(dev) for the collision lookup. For a tunnel moved through IFLA_NET_NS_FD, dev_net(dev) is the new netns, not t->net. SIOCCHGTUNNEL on a migrated tunnel then runs: net = dev_net(dev) /* migrated netns */ t = vti6_locate(net, &p1, false) /* misses target in t->net */ ... t = netdev_priv(dev) vti6_update(t, &p1, false) /* mutates t->net's hash */

    Veröffentlicht Aktualisiert
  5. CVE-2026-63920

    Hoch · CVSS 7.1EPSS 0,17%Keine Korrektur veröffentlicht

    ipv6: validate extension header length before copying to cmsg

    In the Linux kernel, the following vulnerability has been resolved: ipv6: validate extension header length before copying to cmsg ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR} cmsgs (and their IPV6_2292* legacy counterparts) by trusting the on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length. The length was validated only at parse time (ipv6_parse_hopopts(), etc.). An nftables payload-write expression can rewrite hdrlen after parsing and before the skb reaches recvmsg; the write itself is in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040 bytes from an 8-byte header. nftables is reachab

    Veröffentlicht Aktualisiert
  6. CVE-2026-63917

    Hoch · CVSS 8.8EPSS 0,17%Keine Korrektur veröffentlicht

    ip6: vti: Use ip6_tnl.net in vti6_changelink().

    In the Linux kernel, the following vulnerability has been resolved: ip6: vti: Use ip6_tnl.net in vti6_changelink(). ip netns add ns1 ip netns add ns2 ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7 ip -n ns1 link set vti6_test netns ns2 ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9 ip netns del ns2 ip netns del ns1 [ 132.495484] ------------[ cut here ]------------ [ 132.497609] kernel BUG at net/core/dev.c:12376! Commit 61220ab34948 ("vti6: Enable namespace changing") dropped NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then move through IFLA_NET_NS_FD. After the move dev_net(dev) points

    Veröffentlicht Aktualisiert
  7. CVE-2026-63916

    Hoch · CVSS 8.8EPSS 0,36%Keine Korrektur veröffentlicht

    HID: wacom: Fix OOB write in wacom_hid_set_device_mode()

    In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix OOB write in wacom_hid_set_device_mode() wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE usage is always located in the first field (field[0]) of the feature report. However, a device can specify HID_DG_INPUTMODE in a different field. If HID_DG_INPUTMODE is in a field other than the first one and the first field has a report_count smaller than the usage_index of HID_DG_INPUTMODE, this leads to an out-of-bounds write to r->field[0]->value. Fix this by storing the field index of HID_DG_INPUTMODE in 'struct hid_data' during feature map

    Veröffentlicht Aktualisiert
  8. CVE-2026-63915

    Hoch · CVSS 8.8EPSS 0,35%Keine Korrektur veröffentlicht

    nfc: hci: fix out-of-bounds read in HCP header parsing

    In the Linux kernel, the following vulnerability has been resolved: nfc: hci: fix out-of-bounds read in HCP header parsing Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read packet->header from skb->data at function entry without first checking that the buffer holds at least one byte. A malicious NFC peer can send a 0-byte HCP frame that passes through the SHDLC layer and reaches these functions, causing an out-of-bounds heap read of packet->header. The same 0-byte frame, if queued as a non-final fragment, also causes the reassembly loop to underflow msg_len to UINT_MAX, triggering skb_over_panic() when the reassembled skb is

    Veröffentlicht Aktualisiert
  9. CVE-2026-63914

    Hoch · CVSS 7.3EPSS 0,15%Keine Korrektur veröffentlicht

    xfrm: route MIGRATE notifications to caller's netns

    In the Linux kernel, the following vulnerability has been resolved: xfrm: route MIGRATE notifications to caller's netns xfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate() in net/key/af_key.c both hardcode &init_net for the multicast that announces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE. XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and the rest of the xfrm/af_key netlink path was made netns-aware in 2008. The other 14 multicast paths in xfrm_user.c route their event using xs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate path was missed. Two consequences of the init_net hardcoding: 1.

    Veröffentlicht Aktualisiert
  10. CVE-2026-63913

    Hoch · CVSS 8.2EPSS 0,97%Keine Korrektur veröffentlicht

    netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check

    In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check An unintended behavior in the TCP conntrack state machine allows a connection to be forced into the CLOSE state using an RST packet with an invalid sequence number. Specifically, after a SYN packet is observed, an RST with an invalid SEQ can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of whether the RST corresponds to the expected reply direction. The relevant code path assumes the RST is a response to an outgoing SYN, but does not validate packet direction or ens

    Veröffentlicht Aktualisiert
  11. CVE-2026-63912

    Kritisch · CVSS 9.8EPSS 0,71%Keine Korrektur veröffentlicht

    xfrm: esp: restore combined single-frag length gate

    In the Linux kernel, the following vulnerability has been resolved: xfrm: esp: restore combined single-frag length gate The ESP out-of-place fast path appends the trailer in esp_output_head() before esp_output_tail() allocates the destination page frag. The head-side gate currently checks skb->data_len and tailen separately, but the tail code allocates a single destination frag from the combined post-trailer skb->data_len. Reject the page-frag fast path when the combined aligned length exceeds a page. Otherwise skb_page_frag_refill() may fall back to a single page while the destination sg still spans the combined skb->data_len. Restore th

    Veröffentlicht Aktualisiert
  12. CVE-2026-63908

    Mittel · CVSS 5.5EPSS 0,16%Keine Korrektur veröffentlicht

    Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem

    In the Linux kernel, the following vulnerability has been resolved: Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code proc

    Veröffentlicht Aktualisiert
  13. CVE-2026-63905

    Hoch · CVSS 7.8EPSS 0,17%Keine Korrektur veröffentlicht

    usbip: vudc: Fix use after free bug in vudc_remove due to race condition

    In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: Fix use after free bug in vudc_remove due to race condition This patch follows up Zheng Wang's 2023 report of a use-after-free in vudc_remove(). The original thread stalled on Shuah Khan's request for runtime testing of the unplug/unbind path. This patch supplies that testing and keeps Zheng's original fix shape. In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer(). usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer(). vudc_remove() can then free the containing struct vudc while the timer is still pending or executing. KA

    Veröffentlicht Aktualisiert
  14. CVE-2026-63904

    Hoch · CVSS 7.1EPSS 0,17%Keine Korrektur veröffentlicht

    usb: usbtmc: check URB actual_length for interrupt-IN notifications

    In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: check URB actual_length for interrupt-IN notifications USBTMC devices can use an optional interrupt endpoint for notification messages. These typically contain two-byte headers indicating the payload format, but the driver does not check if these headers are present before accessing the data buffers. In cases where the URB actual_length is not enough to fit these headers, the driver will either cause an out-of-bounds read, or consume stale leftover data from a previous notification. Fix by checking if actual_data contains enough bytes for the headers, otherwis

    Veröffentlicht Aktualisiert
  15. CVE-2026-63903

    Hoch · CVSS 7.1EPSS 0,17%Keine Korrektur veröffentlicht

    USB: serial: belkin_sa: validate interrupt status length

    In the Linux kernel, the following vulnerability has been resolved: USB: serial: belkin_sa: validate interrupt status length The Belkin interrupt callback treats interrupt data as a four-byte status report and reads LSR/MSR fields at offsets 2 and 3. The interrupt-in buffer length is derived from endpoint wMaxPacketSize, and short interrupt transfers may complete successfully with a smaller actual_length. Check the completed interrupt packet length before parsing status fields so short interrupt endpoints and short successful packets are ignored instead of causing out-of-bounds or stale status-byte reads. KASAN report as below: BUG: KASA

    Veröffentlicht Aktualisiert
  16. CVE-2026-63902

    Hoch · CVSS 7.1EPSS 0,17%Keine Korrektur veröffentlicht

    USB: serial: cypress_m8: validate interrupt packet headers

    In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: validate interrupt packet headers cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the i

    Veröffentlicht Aktualisiert
  17. CVE-2026-63901

    Hoch · CVSS 7.8EPSS 0,18%Keine Korrektur veröffentlicht

    USB: serial: digi_acceleport: fix memory corruption with small endpoints

    In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix memory corruption with small endpoints Add the missing bulk-out buffer size sanity checks to avoid out-of-bounds memory accesses or slab corruption should a malicious device report smaller buffers than expected.

    Veröffentlicht Aktualisiert
  18. CVE-2026-63900

    Mittel · CVSS 5.5EPSS 0,17%Keine Korrektur veröffentlicht

    USB: serial: keyspan: fix missing indat transfer sanity check

    In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan: fix missing indat transfer sanity check Add the missing sanity check on the size of usa49wg indat transfers to avoid parsing stale or uninitialised slab data.

    Veröffentlicht Aktualisiert
  19. CVE-2026-63899

    Hoch · CVSS 7.8EPSS 0,18%Keine Korrektur veröffentlicht

    USB: serial: mxuport: fix memory corruption with small endpoint

    In the Linux kernel, the following vulnerability has been resolved: USB: serial: mxuport: fix memory corruption with small endpoint Make sure that the bulk-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption should a malicious device report a smaller size.

    Veröffentlicht Aktualisiert

Prüfen Sie Ihren Server

Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.

Prüfen Sie Ihren Server →