Sicherheitslücken in linux · Seite 128

hfs: fix OOB Read in __hfs_brec_find

In the Linux kernel, the following vulnerability has been resolved: hfs: fix OOB Read in __hfs_brec_find Syzbot reported a OOB read bug: ================================================================== BUG: KASAN: slab-out-of-bounds in hfs_strcmp+0x117/0x190 fs/hfs/string.c:84 Read of size 1 at addr ffff88807eb62c4e by task kworker/u4:1/11 CPU: 1 PID: 11 Comm: kworker/u4:1 Not tainted 6.1.0-rc6-syzkaller-00308-g644e9524388a #0 Workqueue: writeback wb_workfn (flush-7:0) Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284

blk-throttle: prevent overflow while calculating wait time

In the Linux kernel, the following vulnerability has been resolved: blk-throttle: prevent overflow while calculating wait time There is a problem found by code review in tg_with_in_bps_limit() that 'bps_limit * jiffy_elapsed_rnd' might overflow. Fix the problem by calling mul_u64_u64_div_u64() instead.

serial: pch: Fix PCI device refcount leak in pch_request_dma()

In the Linux kernel, the following vulnerability has been resolved: serial: pch: Fix PCI device refcount leak in pch_request_dma() As comment of pci_get_slot() says, it returns a pci_device with its refcount increased. The caller must decrement the reference count by calling pci_dev_put(). Since 'dma_dev' is only used to filter the channel in filter(), we can call pci_dev_put() before exiting from pch_request_dma(). Add the missing pci_dev_put() for the normal and error path.

xfrm: Update ipcomp_scratches with NULL when freed

In the Linux kernel, the following vulnerability has been resolved: xfrm: Update ipcomp_scratches with NULL when freed Currently if ipcomp_alloc_scratches() fails to allocate memory ipcomp_scratches holds obsolete address. So when we try to free the percpu scratches using ipcomp_free_scratches() it tries to vfree non existent vm area. Described below: static void * __percpu *ipcomp_alloc_scratches(void) { ... scratches = alloc_percpu(void *); if (!scratches) return NULL; ipcomp_scratches does not know about this allocation failure. Therefore holding the old obsolete address. ... } So when we

usb: gadget: f_hid: fix f_hidg lifetime vs cdev

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: fix f_hidg lifetime vs cdev The embedded struct cdev does not have its lifetime correctly tied to the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN is held open while the gadget is deleted. This can readily be replicated with libusbgx's example programs (for conciseness - operating directly via configfs is equivalent): gadget-hid exec 3<> /dev/hidg0 gadget-vid-pid-remove exec 3<&- Pull the existing device up in to struct f_hidg and make use of the cdev_device_{add,del}() helpers. This changes the lifetime of the device objec

fs: jfs: fix shift-out-of-bounds in dbAllocAG

In the Linux kernel, the following vulnerability has been resolved: fs: jfs: fix shift-out-of-bounds in dbAllocAG Syzbot found a crash : UBSAN: shift-out-of-bounds in dbAllocAG. The underlying bug is the missing check of bmp->db_agl2size. The field can be greater than 64 and trigger the shift-out-of-bounds. Fix this bug by adding a check of bmp->db_agl2size in dbMount since this field is used in many following functions. The upper bound for this field is L2MAXL2SIZE - L2MAXAG, thanks for the help of Dave Kleikamp. Note that, for maintenance, I reorganized error handling code of dbMount.

mtd: Fix device name leak when register device failed in add_mtd_device()

In the Linux kernel, the following vulnerability has been resolved: mtd: Fix device name leak when register device failed in add_mtd_device() There is a kmemleak when register device failed: unreferenced object 0xffff888101aab550 (size 8): comm "insmod", pid 3922, jiffies 4295277753 (age 925.408s) hex dump (first 8 bytes): 6d 74 64 30 00 88 ff ff mtd0.... backtrace: [<00000000bde26724>] __kmalloc_node_track_caller+0x4e/0x150 [<000000003c32b416>] kvasprintf+0xb0/0x130 [<000000001f7a8f15>] kobject_set_name_vargs+0x2f/0xb0 [<000000006e781163>] dev_set_name+0xab/0xe0 [<0

s390/netiucv: Fix return type of netiucv_tx()

In the Linux kernel, the following vulnerability has been resolved: s390/netiucv: Fix return type of netiucv_tx() With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t

dm thin: Fix UAF in run_timer_softirq()

In the Linux kernel, the following vulnerability has been resolved: dm thin: Fix UAF in run_timer_softirq() When dm_resume() and dm_destroy() are concurrent, it will lead to UAF, as follows: BUG: KASAN: use-after-free in __run_timers+0x173/0x710 Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0 <snip> Call Trace: <IRQ> dump_stack_lvl+0x73/0x9f print_report.cold+0x132/0xaa2 _raw_spin_lock_irqsave+0xcd/0x160 __run_timers+0x173/0x710 kasan_report+0xad/0x110 __run_timers+0x173/0x710 __asan_store8+0x9c/0x140 __run_timers+0x173/0x710 call_timer_fn+0x310/0x310 pvclock_clocksource_read+0xfa/0x250 kvm_clock_rea

drm: Fix potential null-ptr-deref due to drmm_mode_config_init()

In the Linux kernel, the following vulnerability has been resolved: drm: Fix potential null-ptr-deref due to drmm_mode_config_init() drmm_mode_config_init() will call drm_mode_create_standard_properties() and won't check the ret value. When drm_mode_create_standard_properties() failed due to alloc, property will be a NULL pointer and may causes the null-ptr-deref. Fix the null-ptr-deref by adding the ret value check. Found null-ptr-deref while testing insert module bochs: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000060-0x00000000

drm/gma500: Fix null dereference in hdmi teardown

In the Linux kernel, the following vulnerability has been resolved: drm/gma500: Fix null dereference in hdmi teardown pci_set_drvdata sets the value of pdev->driver_data to NULL, after which the driver_data obtained from the same dev is dereferenced in oaktrail_hdmi_i2c_exit, and the i2c_dev is extracted from it. To prevent this, swap these calls. Found by Linux Verification Center (linuxtesting.org) with Svacer.

scsi: mvsas: Fix use-after-free bugs in mvs_work_queue

In the Linux kernel, the following vulnerability has been resolved: scsi: mvsas: Fix use-after-free bugs in mvs_work_queue During the detaching of Marvell's SAS/SATA controller, the original code calls cancel_delayed_work() in mvs_free() to cancel the delayed work item mwq->work_q. However, if mwq->work_q is already running, the cancel_delayed_work() may fail to cancel it. This can lead to use-after-free scenarios where mvs_free() frees the mvs_info while mvs_work_queue() is still executing and attempts to access the already-freed mvs_info. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work call

scsi: target: target_core_configfs: Add length check to avoid buffer overflow

In the Linux kernel, the following vulnerability has been resolved: scsi: target: target_core_configfs: Add length check to avoid buffer overflow A buffer overflow arises from the usage of snprintf to write into the buffer "buf" in target_lu_gp_members_show function located in /drivers/target/target_core_configfs.c. This buffer is allocated with size LU_GROUP_NAME_BUF (256 bytes). snprintf(...) formats multiple strings into buf with the HBA name (hba->hba_group.cg_item), a slash character, a devicename (dev-> dev_group.cg_item) and a newline character, the total formatted string length may exceed the buffer size of 256 bytes. Since snprin

media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove

In the Linux kernel, the following vulnerability has been resolved: media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove The original code uses cancel_delayed_work() in flexcop_pci_remove(), which does not guarantee that the delayed work item irq_check_work has fully completed if it was already running. This leads to use-after-free scenarios where flexcop_pci_remove() may free the flexcop_device while irq_check_work is still active and attempts to dereference the device. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) flexcop_pci_remove()

media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe

In the Linux kernel, the following vulnerability has been resolved: media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe The state->timer is a cyclic timer that schedules work_i2c_poll and delayed_work_enable_hotplug, while rearming itself. Using timer_delete() fails to guarantee the timer isn't still running when destroyed, similarly cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has terminated if already executing. During probe failure after timer initialization, these may continue running as orphans and reference the already-freed tc358743_state object through tc358743_irq_poll_timer. The follow

media: tuner: xc5000: Fix use-after-free in xc5000_release

In the Linux kernel, the following vulnerability has been resolved: media: tuner: xc5000: Fix use-after-free in xc5000_release The original code uses cancel_delayed_work() in xc5000_release(), which does not guarantee that the delayed work item timer_sleep has fully completed if it was already running. This leads to use-after-free scenarios where xc5000_release() may free the xc5000_priv while timer_sleep is still active and attempts to dereference the xc5000_priv. A typical race condition is illustrated below: CPU 0 (release thread) | CPU 1 (delayed work callback) xc5000_release() | xc5000_do_timer_s

media: rc: fix races with imon_disconnect()

In the Linux kernel, the following vulnerability has been resolved: media: rc: fix races with imon_disconnect() Syzbot reports a KASAN issue as below: BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline] BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465 CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_a

• Auf 4.4.0-277.311 aktualisieren

can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow

In the Linux kernel, the following vulnerability has been resolved: can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow Sending an PF_PACKET allows to bypass the CAN framework logic and to directly reach the xmit() function of a CAN driver. The only check which is performed by the PF_PACKET framework is to make sure that skb->len fits the interface's MTU. Unfortunately, because the sun4i_can driver does not populate its net_device_ops->ndo_change_mtu(), it is possible for an attacker to configure an invalid MTU by doing, for example: $ ip link set can0 mtu 9999 After doing so, the attacker could open a PF_PACKET socket

i40e: add validation for ring_len param

In the Linux kernel, the following vulnerability has been resolved: i40e: add validation for ring_len param The `ring_len` parameter provided by the virtual function (VF) is assigned directly to the hardware memory context (HMC) without any validation. To address this, introduce an upper boundary check for both Tx and Rx queue lengths. The maximum number of descriptors supported by the hardware is 8k-32. Additionally, enforce alignment constraints: Tx rings must be a multiple of 8, and Rx rings must be a multiple of 32.

fbcon: fix integer overflow in fbcon_do_set_font

In the Linux kernel, the following vulnerability has been resolved: fbcon: fix integer overflow in fbcon_do_set_font Fix integer overflow vulnerabilities in fbcon_do_set_font() where font size calculations could overflow when handling user-controlled font parameters. The vulnerabilities occur when: 1. CALC_FONTSZ(h, pitch, charcount) performs h * pith * charcount multiplication with user-controlled values that can overflow. 2. FONT_EXTRA_WORDS * sizeof(int) + size addition can also overflow 3. This results in smaller allocations than expected, leading to buffer overflows during font data copying. Add explicit overflow checking using