Sicherheitslücken in linux-gcp-4.15 · Seite 169

btrfs: fix deadlock when aborting transaction during relocation with scrub

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock when aborting transaction during relocation with scrub Before relocating a block group we pause scrub, then do the relocation and then unpause scrub. The relocation process requires starting and committing a transaction, and if we have a failure in the critical section of the transaction commit path (transaction state >= TRANS_STATE_COMMIT_START), we will deadlock if there is a paused scrub. That results in stack traces like the following: [42.479] BTRFS info (device sdc): relocating block group 53876686848 flags metadata|raid6 [42.936] BTRFS warni

can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_write

In the Linux kernel, the following vulnerability has been resolved: can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_write Syzkaller reported the following issue: ===================================================== BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline] BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600 aio_rw_done fs/aio.c:1520 [inline] aio_write+0x899/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [in

icmp6: Fix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev().

In the Linux kernel, the following vulnerability has been resolved: icmp6: Fix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev(). With some IPv6 Ext Hdr (RPL, SRv6, etc.), we can send a packet that has the link-local address as src and dst IP and will be forwarded to an external IP in the IPv6 Ext Hdr. For example, the script below generates a packet whose src IP is the link-local address and dst is updated to 11::. # for f in $(find /proc/sys/net/ -name *seg6_enabled*); do echo 1 > $f; done # python3 >>> from socket import * >>> from scapy.all import * >>> >>> SRC_ADDR = DST_ADDR = "fe80::5054:ff:fe12:3456" >>> >

lwt: Fix return values of BPF xmit ops

In the Linux kernel, the following vulnerability has been resolved: lwt: Fix return values of BPF xmit ops BPF encap ops can return different types of positive values, such like NET_RX_DROP, NET_XMIT_CN, NETDEV_TX_BUSY, and so on, from function skb_do_redirect and bpf_lwt_xmit_reroute. At the xmit hook, such return values would be treated implicitly as LWTUNNEL_XMIT_CONTINUE in ip(6)_finish_output2. When this happens, skbs that have been freed would continue to the neighbor subsystem, causing use-after-free bug and kernel crashes. To fix the incorrect behavior, skb_do_redirect return values can be simply discarded, the same as tc-egress be

nilfs2: do not write dirty data after degenerating to read-only

In the Linux kernel, the following vulnerability has been resolved: nilfs2: do not write dirty data after degenerating to read-only According to syzbot's report, mark_buffer_dirty() called from nilfs_segctor_do_construct() outputs a warning with some patterns after nilfs2 detects metadata corruption and degrades to read-only mode. After such read-only degeneration, page cache data may be cleared through nilfs_clear_dirty_page() which may also clear the uptodate flag for their buffer heads. However, even after the degeneration, log writes are still performed by unmount processing etc., which causes mark_buffer_dirty() to be called for buff

RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()

In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish() If get_ep_from_tid() fails to lookup non-NULL value for ep, ep is dereferenced later regardless of whether it is empty. This patch adds a simple sanity check to fix the issue. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure syzbot is reporting NULL pointer dereference at hci_uart_tty_close() [1], for rcu_sync_enter() is called without rcu_sync_init() due to hci_uart_tty_open() ignoring percpu_init_rwsem() failure. While we are at it, fix that hci_uart_register_device() ignores percpu_init_rwsem() failure and hci_uart_unregister_device() does not call percpu_free_rwsem().

i2c: mux: reg: check return value after calling platform_get_resource()

In the Linux kernel, the following vulnerability has been resolved: i2c: mux: reg: check return value after calling platform_get_resource() It will cause null-ptr-deref in resource_size(), if platform_get_resource() returns NULL, move calling resource_size() after devm_ioremap_resource() that will check 'res' to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

brcmfmac: return error when getting invalid max_flowrings from dongle

In the Linux kernel, the following vulnerability has been resolved: brcmfmac: return error when getting invalid max_flowrings from dongle When firmware hit trap at initialization, host will read abnormal max_flowrings number from dongle, and it will cause kernel panic when doing iowrite to initialize dongle ring. To detect this error at early stage, we directly return error when getting invalid max_flowrings(>256).

net: sched: sfb: fix null pointer access issue when sfb_init() fails

In the Linux kernel, the following vulnerability has been resolved: net: sched: sfb: fix null pointer access issue when sfb_init() fails When the default qdisc is sfb, if the qdisc of dev_queue fails to be inited during mqprio_init(), sfb_reset() is invoked to clear resources. In this case, the q->qdisc is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() sfb_init() tcf_block_get() --->failed, q->qdisc is NULL ... qdisc_put() ... sfb_reset() qdisc_reset(q->qdisc) --->q->qdisc is NULL ops = qdisc->ops The following is the Call Trace information: general protection fault, probably

UBUNTU-CVE-2022-50345

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one Eric Dumazet says: nf_conntrack_dccp_packet() has an unique: dh = skb_header_pointer(skb, dataoff, sizeof(_dh), &_dh); And nothing more is 'pulled' from the packet, depending on the content. dh->dccph_doff, and/or dh->dccph_x ...) So dccp_ack_seq() is happily reading stuff past the _dh buffer. BUG: KASAN: stack-out-of-bounds in nf_conntrack_dccp_packet+0x1134/0x11c0 Read of size 4 at addr ffff000128f66e0c by task syz-executor.2/29371 [..] Fix this by increasing the stack buffer

• Auf 4.15.0-1160.177 aktualisieren

genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()

In the Linux kernel, the following vulnerability has been resolved: genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask() If ipi_send_{mask|single}() is called with an invalid interrupt number, all the local variables there will be NULL. ipi_send_verify() which is invoked from these functions does verify its 'data' parameter, resulting in a kernel oops in irq_data_get_affinity_mask() as the passed NULL pointer gets dereferenced. Add a missing NULL pointer check in ipi_send_verify()... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

pstore/ram: Check start of empty przs during init

In the Linux kernel, the following vulnerability has been resolved: pstore/ram: Check start of empty przs during init After commit 30696378f68a ("pstore/ram: Do not treat empty buffers as valid"), initialization would assume a prz was valid after seeing that the buffer_size is zero (regardless of the buffer start position). This unchecked start value means it could be outside the bounds of the buffer, leading to future access panics when written to: sysdump_panic_event+0x3b4/0x5b8 atomic_notifier_call_chain+0x54/0x90 panic+0x1c8/0x42c die+0x29c/0x2a8 die_kernel_fault+0x68/0x78 __do_kernel_fault+0x1c4/0x1e0 do_bad_area+0x40/0x100 do

powerpc: Don't try to copy PPR for task with NULL pt_regs

In the Linux kernel, the following vulnerability has been resolved: powerpc: Don't try to copy PPR for task with NULL pt_regs powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which from my (arguably very short) checking is not commonly done for other archs. This is fine, except when PF_IO_WORKER's have been created and the task does something that causes a coredump to be generated. Then we get this crash: Kernel attempted to read user page (160) - exploit attempt? (uid: 1000) BUG: Kernel NULL pointer dereference on read at 0x00000160 Faulting instruction address: 0xc0000000000c3a60 Oops: Kernel access of bad area, s

drm/msm/mdp5: Don't leak some plane state

In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp5: Don't leak some plane state Apparently no one noticed that mdp5 plane states leak like a sieve ever since we introduced plane_state->commit refcount a few years ago in 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.") Fix it by using the right helpers. Patchwork: https://patchwork.freedesktop.org/patch/551236/

scsi: qla2xxx: Wait for io return on terminate rport

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Wait for io return on terminate rport System crash due to use after free. Current code allows terminate_rport_io to exit before making sure all IOs has returned. For FCP-2 device, IO's can hang on in HW because driver has not tear down the session in FW at first sign of cable pull. When dev_loss_tmo timer pops, terminate_rport_io is called and upper layer is about to free various resources. Terminate_rport_io trigger qla to do the final cleanup, but the cleanup might not be fast enough where it leave qla still holding on to the same resource. Wait for IO's t

recordmcount: Fix memory leaks in the uwrite function

In the Linux kernel, the following vulnerability has been resolved: recordmcount: Fix memory leaks in the uwrite function Common realloc mistake: 'file_append' nulled but not freed upon failure

ext4: fix WARNING in mb_find_extent

In the Linux kernel, the following vulnerability has been resolved: ext4: fix WARNING in mb_find_extent Syzbot found the following issue: EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, O_DIRECT and fast_commit support! EXT4-fs (loop0): orphan cleanup on readonly fs ------------[ cut here ]------------ WARNING: CPU: 1 PID: 5067 at fs/ext4/mballoc.c:1869 mb_find_extent+0x8a1/0xe30 Modules linked in: CPU: 1 PID: 5067 Comm: syz-executor307 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:mb_find_extent+0x8a1/0xe30 fs

fbdev/ep93xx-fb: Do not assign to struct fb_info.dev

In the Linux kernel, the following vulnerability has been resolved: fbdev/ep93xx-fb: Do not assign to struct fb_info.dev Do not assing the Linux device to struct fb_info.dev. The call to register_framebuffer() initializes the field to the fbdev device. Drivers should not override its value. Fixes a bug where the driver incorrectly decreases the hardware device's reference counter and leaks the fbdev device. v2: * add Fixes tag (Dan)