media: go7007: defer the ALSA v4l2 put until card release
In the Linux kernel, the following vulnerability has been resolved:
media: go7007: defer the ALSA v4l2 put until card release
go7007_snd_init() already takes a v4l2_device reference for the ALSA
side, but go7007_snd_remove() drops it immediately after calling
snd_card_free_when_closed().
That is too early when a userspace process still has the capture PCM open.
The ALSA card and its PCM callbacks remain alive until the last file is
closed, so the release path can still reach struct go7007 through
pcm->private_data and call go7007_snd_hw_free() after the V4L2 release path
has freed the object.
Move the matching v4l2_device_put() to the ALS
media: i2c: ov7740: fix use-after-destroy in remove
In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov7740: fix use-after-destroy in remove
The ov7740_remove() function had a severe teardown order bug where it
destroyed the driver's mutex before freeing the V4L2 control handler
which relies on that mutex, leading to a use-after-destroy kernel panic.
Furthermore, the driver explicitly called v4l2_ctrl_handler_free() and
mutex_destroy() sequentially, but then called ov7740_free_controls()
which invokes both of them a second time, resulting in a double-free.
This patch fixes the issue by unregistering the subdevice first, and
relying exclusively on ov7740_free_c
media: rc: sunxi-cir: Unregister rc device on probe failure
In the Linux kernel, the following vulnerability has been resolved:
media: rc: sunxi-cir: Unregister rc device on probe failure
After rc_register_device() succeeds, later probe failures must undo the
registration with rc_unregister_device(). The current error path jumps to
the allocation cleanup label and only calls rc_free_device(), leaving the
rc device registration and resources created by rc_register_device()
behind.
Add a registered-device unwind label for the IRQ lookup, IRQ request, and
hardware initialization failure paths. Keep rc_free_device() for failures
before rc_register_device() succeeds.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak
In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak
rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to
NULL before any pending streaming teardown has run. When user space
later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming()
which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases
each coherent buffer with:
usb_free_coherent(dev->udev, dev->buf_size,
dev->buf_list[dev->buf_num],
dev->dma_addr[dev->buf_num]);
usb_free_coherent() returns immediatel
media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure
In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure
rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(),
rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and
shares a single err: label that only unlocks the mutex and returns.
When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs()
itself returns -ENOMEM after alloc_stream_bufs() has already succeeded,
the URBs and/or the coherent DMA stream buffers stay allocated while
streaming reports failure to vb2. Two latent defects follow on the next
VIDIO
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
media: s2255: bound JPEG frame size before copying into the buffer
In the Linux kernel, the following vulnerability has been resolved:
media: s2255: bound JPEG frame size before copying into the buffer
s2255_fillbuff() memcpy()s vc->jpg_size bytes of a captured JPEG/MJPEG
frame into the vb2 plane. vc->jpg_size is taken verbatim from the
S2255_MARKER_FRAME header the device sends (pdword[4] in save_frame())
and, unlike the frame payload length just above it, is never bounded:
payload = le32_to_cpu(pdword[3]);
if (payload > vc->req_image_size) /* payload is checked ... */
return -EINVAL;
vc->pkt_size = payload;
vc->jpg_size = le32_to_cpu(pdword[4]); /* ... jpg_size is not */
A malicious or malfuncti
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
media: s2255: check firmware size before reading trailing marker
In the Linux kernel, the following vulnerability has been resolved:
media: s2255: check firmware size before reading trailing marker
s2255_probe() reads a 4-byte marker and version from the last 8 bytes
of the firmware blob (fw->data[fw_size - 8] and [fw_size - 4]). If the
firmware file is shorter than 8 bytes, fw_size - 8 underflows and the
access reads out of bounds. Validate the firmware size before indexing.
media: saa7164: fix cleanup on resource allocation failure
In the Linux kernel, the following vulnerability has been resolved:
media: saa7164: fix cleanup on resource allocation failure
saa7164_dev_setup() adds the device to the global saa7164_devlist before
requesting the PCI BAR memory regions.
If get_resources() fails, saa7164_dev_setup() decrements the device count
and returns an error, but leaves the device on saa7164_devlist. The probe
error path then frees the device, leaving a dangling entry on the global
list.
Reuse the existing MMIO mapping error path to remove the device from
saa7164_devlist and decrement the device count before returning.
Also release BAR0 if it was successfully requ
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
media: tda18250: fix possible integer overflow
In the Linux kernel, the following vulnerability has been resolved:
media: tda18250: fix possible integer overflow
Integer overflow may occur, when variable exp equals to zero. Result
of shift 1 << (exp - 1) may then leads to undefined behavior.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
media: v4l2-fwnode: Fix fwnode leak in v4l2_fwnode_parse_link
In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-fwnode: Fix fwnode leak in v4l2_fwnode_parse_link
In v4l2_fwnode_parse_link(), the remote endpoint fwnode reference is
acquired using fwnode_graph_get_remote_endpoint(). This reference is
properly released in the error paths, but it is leaked on the success
path.
Add the missing fwnode_handle_put() before returning 0 to prevent the
reference leak.
[Sakari Ailus: Fix subject prefix and coding style a little.]
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure
In the Linux kernel, the following vulnerability has been resolved:
media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure
kthread_run() returns an ERR_PTR on failure, not NULL.
When start_streaming() fails, data->kthread_vid_cap is left holding
this error pointer instead of being cleared.
This causes two subsequent bugs:
1. A future call to start_streaming() sees a non-NULL kthread_vid_cap
and returns 0 (success) immediately, without actually starting the
capture thread.
2. A call to stop_streaming() checks 'kthread_vid_cap == NULL' which
is false for an error pointer, and proceeds to call kthread_stop()
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE
(256-byte) bounce buffer obtained from dma_pool_alloc(), which does not
zero the allocation. They initialize only a few leading bytes before
handing the buffer to qla2x00_write_sfp().
qla2x00_write_sfp() can override the transfer length with a user-supplied
value:
if (len == 1)
opt |= BIT_0;
if (opt & BIT_0)
len = *sfp;
*sfp is the first byte of the (user-controlled) payload, so len can grow
up to 255. The device then DMA-reads len bytes f
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
struct qla_i2c_access carries a 16-bit length field alongside a fixed
64-byte buffer:
struct qla_i2c_access {
uint16_t device, offset, option, length;
uint8_t buffer[0x40];
} __packed;
qla2x00_write_i2c() and qla2x00_read_i2c() use the user-supplied
i2c->length without any bounds check. i2c is overlaid on a 256-byte
on-stack buffer and sfp is a 256-byte DMA-pool buffer, so a length up to
65535 overruns both:
- write: memcpy(sfp, i2c->buffer, i2c->length) over-reads the stack and
over-writes the sfp heap bu
scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition()
In the format 1 path, the virtual port is located on ha->vp_list while
holding vport_slock, but the lock is dropped before vp is used:
qla_update_host_map() is called and VP_IDX_ACQUIRED/REGISTER_FC4_NEEDED/
REGISTER_FDMI_NEEDED are set on vp. No reference is taken across that
window, so a concurrent qla24xx_deallocate_vp_id() can tear the vport
down and free it, leading to a use-after-free.
Take a vport reference (vref_count) under vport_slock when the matching
vp is found, and drop it after the last u
scsi: qla2xxx: Initialize NVMe abort_work once at submission
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Initialize NVMe abort_work once at submission
qla_nvme_fcp_abort() and qla_nvme_ls_abort() ran INIT_WORK() on
priv->abort_work immediately before schedule_work(). INIT_WORK()
reinitializes the work_struct, resetting its list head and clearing the
pending bit. If an abort is issued more than once for the same command
(for example, concurrent transport teardown and a timeout-driven abort),
the second INIT_WORK() reinitializes a work item that is already queued,
which can corrupt the workqueue list and lead to crashes or a looping
worker.
Initialize priv->abort
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak
qla2x00_do_dport_diagnostics() allocates the qla_dport_diag response
buffer with kmalloc_obj() (non-zeroing) and, on success, copies the full
sizeof(*dd) back to user space via sg_copy_from_buffer(). The inbound
sg_copy_to_buffer() only fills as many bytes as the user request payload
provides, and qla26xx_dport_diagnostics() zeroes only dd->buf. The
options and unused[] fields are therefore copied out uninitialized,
leaking kernel heap contents to user space.
Allocate with kzalloc_obj(), matching qla2x00_do_dp
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions()
qla2x00_update_fru_versions() copies the user-supplied BSG request into
a fixed 256-byte stack buffer (bsg[DMA_POOL_SIZE]) and then iterates
list->count times over the qla_image_version array embedded in that
buffer, advancing the image pointer each iteration. count is taken
directly from user input with no upper bound, while only (DMA_POOL_SIZE
- sizeof(list->count)) / sizeof(struct qla_image_version) = 6 entries
actually fit. A larger count walks the image pointer off the end of the
stack buffer, reading ad
scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation
ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and
ha->max_qpairs are u8. Deriving the queue count as
"ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board
(or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X
vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X
count of 1 zeroes it as well, and in target mode the subsequent
"ha->max_req_queues--" then underflows 0 to 255.
When the count is 0, qla2x00_alloc_queues() calls
kzalloc_objs(st
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
scsi: qla2xxx: Serialize flash version read in reset handler
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize flash version read in reset handler
The "update cache versions without reset" sysfs reset operation (0x20261)
calls get_flash_version(), which reads hardware flash registers, without
holding ha->optrom_mutex. The VPD update path serializes the same call
under optrom_mutex, so this reset path can interleave its flash register
accesses with a concurrent VPD or optrom flash operation and corrupt the
reads.
Hold ha->optrom_mutex across the get_flash_version() call to match the
VPD update path.
scsi: qla2xxx: Fix cs84xx use-after-free on host teardown
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix cs84xx use-after-free on host teardown
qla84xx_put_chip() drops the last reference to ha->cs84xx and frees it via
__qla84xx_chip_release() without clearing ha->cs84xx. During teardown it ran
before scsi_remove_host(), which is what removes the 84xx_fw_version host
sysfs attribute. A concurrent read of that attribute in the window between
the two calls executes qla24xx_84xx_fw_version_show(), which dereferences
the freed ha->cs84xx, resulting in a use-after-free.
Move qla84xx_put_chip() to after scsi_remove_host() in both
qla2x00_remove_one() and qla2x00_