Sicherheitslücken in linux-azure-fde-5.15 · Seite 186

firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled

In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled When the Remote System Update (RSU) isn't enabled in the First Stage Boot Loader (FSBL), the driver encounters a NULL pointer dereference when excute svc_normal_to_secure_thread() thread, resulting in a kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ... Data abort info: ... [0000000000000008] user address but active_mm is swapper Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 79 Comm: svc_smc_

kprobes: avoid crash when rmmod/insmod after ftrace killed

In the Linux kernel, the following vulnerability has been resolved: kprobes: avoid crash when rmmod/insmod after ftrace killed After we hit ftrace is killed by some errors, the kernel crash if we remove modules in which kprobe probes. BUG: unable to handle page fault for address: fffffbfff805000d PGD 817fcc067 P4D 817fcc067 PUD 817fc8067 PMD 101555067 PTE 0 Oops: Oops: 0000 [#1] SMP KASAN PTI CPU: 4 UID: 0 PID: 2012 Comm: rmmod Tainted: G W OE Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE RIP: 0010:kprobes_module_callback+0x89/0x790 RSP: 0018:ffff88812e157d30 EFLAGS: 00010a02 RAX: 1ffffffff805000d RBX: dffffc0000000000 RCX

libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply() This patch fixes an out-of-bounds access in ceph_handle_auth_reply() that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In ceph_handle_auth_reply(), the value of the payload_len field of such a message is stored in a variable of type int. A value greater than INT_MAX leads to an integer overflow and is interpreted as a negative value. This leads to decrementing the pointer address by this value and subsequently accessing it because ceph_decode_need() only checks that the memory access does

• Auf 5.15.0-1116.125~20.04.1 aktualisieren

libceph: prevent potential out-of-bounds reads in process_message_header()

In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in process_message_header() If the message frame is (maliciously) corrupted in a way that the length of the control segment ends up being less than the size of the message header or a different frame is made to look like a message frame, out-of-bounds reads may ensue in process_message_header(). Perform an explicit bounds check before decoding the message header.

• Auf 5.15.0-1116.125~20.04.1 aktualisieren

libceph: Use u32 for non-negative values in ceph_monmap_decode()

In the Linux kernel, the following vulnerability has been resolved: libceph: Use u32 for non-negative values in ceph_monmap_decode() This patch fixes unnecessary implicit conversions that change signedness of blob_len and num_mon in ceph_monmap_decode(). Currently blob_len and num_mon are (signed) int variables. They are used to hold values that are always non-negative and get assigned in ceph_decode_32_safe(), which is meant to assign u32 values. Both variables are subsequently used as unsigned values, and the value of num_mon is further assigned to monmap->num_mon, which is of type u32. Therefore, both variables should be of type u32. Thi

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

staging: rtl8723bs: properly validate the data in rtw_get_ie_ex()

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: properly validate the data in rtw_get_ie_ex() Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser"), we don't trust the data in the frame so we should check the length better before acting on it

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie The current code checks 'i + 5 < in_len' at the end of the if statement. However, it accesses 'in_ie[i + 5]' before that check, which can lead to an out-of-bounds read. Move the length check to the beginning of the conditional to ensure the index is within bounds before accessing the array.

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

net/tcp-md5: Fix MAC comparison to be constant-time

In the Linux kernel, the following vulnerability has been resolved: net/tcp-md5: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.

• Auf 5.15.0-1116.125~20.04.1 aktualisieren

batman-adv: Avoid double-rtnl_lock ELP metric worker

In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid double-rtnl_lock ELP metric worker batadv_v_elp_get_throughput() might be called when the RTNL lock is already held. This could be problematic when the work queue item is cancelled via cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case, an rtnl_lock() would cause a deadlock. To avoid this, rtnl_trylock() was used in this function to skip the retrieval of the ethtool information in case the RTNL lock was already held. But for cfg80211 interfaces, batadv_get_real_netdev() was called - which also uses rtnl_lock(). The approach for __et

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

nouveau/dpcd: return EBUSY for aux xfer if the device is asleep

In the Linux kernel, the following vulnerability has been resolved: nouveau/dpcd: return EBUSY for aux xfer if the device is asleep If we have runtime suspended, and userspace wants to use /dev/drm_dp_* then just tell it the device is busy instead of crashing in the GSP code. WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy) Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024 RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] This is a simple fix to

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read The q54sj108a2_debugfs_read function suffers from a stack buffer overflow due to incorrect arguments passed to bin2hex(). The function currently passes 'data' as the destination and 'data_char' as the source. Because bin2hex() converts each input byte into two hex characters, a 32-byte block read results in 64 bytes of output. Since 'data' is only 34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end of the buffer onto the stack. Additionally, the arguments were swapped: it was reading from the z

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

ksmbd: fix use-after-free in smb_lazy_parent_lease_break_close()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb_lazy_parent_lease_break_close() opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is being accessed after rcu_read_unlock() has been called. This creates a race condition where the memory could be freed by a concurrent writer between the unlock and the subsequent pointer dereferences (opinfo->is_lease, etc.), leading to a use-after-free.

smb: server: fix use-after-free in smb2_open()

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix use-after-free in smb2_open() The opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is dereferenced after rcu_read_unlock(), creating a use-after-free window.

• Auf 5.15.0-1118.127~20.04.1 aktualisieren

ksmbd: Don't log keys in SMB3 signing and encryption key generation

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Don't log keys in SMB3 signing and encryption key generation When KSMBD_DEBUG_AUTH logging is enabled, generate_smb3signingkey() and generate_smb3encryptionkey() log the session, signing, encryption, and decryption key bytes. Remove the logs to avoid exposing credentials.

net: ncsi: fix skb leak in error paths

In the Linux kernel, the following vulnerability has been resolved: net: ncsi: fix skb leak in error paths Early return paths in NCSI RX and AEN handlers fail to release the received skb, resulting in a memory leak. Specifically, ncsi_aen_handler() returns on invalid AEN packets without consuming the skb. Similarly, ncsi_rcv_rsp() exits early when failing to resolve the NCSI device, response handler, or request, leaving the skb unfreed.

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

drm/amdgpu: Fix use-after-free race in VM acquire

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix use-after-free race in VM acquire Replace non-atomic vm->process_info assignment with cmpxchg() to prevent race when parent/child processes sharing a drm_file both try to acquire the same VM after fork(). (cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618)

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

xfs: fix undersized l_iclog_roundoff values

In the Linux kernel, the following vulnerability has been resolved: xfs: fix undersized l_iclog_roundoff values If the superblock doesn't list a log stripe unit, we set the incore log roundoff value to 512. This leads to corrupt logs and unmountable filesystems in generic/617 on a disk with 4k physical sectors... XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197. XFS (sda1): failed to locate log tail XFS (sda1): log mount/recovery failed: error -74 XFS (sda1): log mount failed XFS (sda1): Mounting V5 Filesystem ff3121

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

x86/apic: Disable x2apic on resume if the kernel expects so

In the Linux kernel, the following vulnerability has been resolved: x86/apic: Disable x2apic on resume if the kernel expects so When resuming from s2ram, firmware may re-enable x2apic mode, which may have been disabled by the kernel during boot either because it doesn't support IRQ remapping or for other reasons. This causes the kernel to continue using the xapic interface, while the hardware is in x2apic mode, which causes hangs. This happens on defconfig + bare metal + s2ram. Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be disabled, i.e. when x2apic_mode = 0. The ACPI v6.6 spec, Section 16.3 [1] says firmwa

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

smb: client: fix in-place encryption corruption in SMB2_write()

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix in-place encryption corruption in SMB2_write() SMB2_write() places write payload in iov[1..n] as part of rq_iov. smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message() encrypts iov[1] in-place, replacing the original plaintext with ciphertext. On a replayable error, the retry sends the same iov[1] which now contains ciphertext instead of the original data, resulting in corruption. The corruption is most likely to be observed when connections are unstable, as reconnects trigger write retries that re-send the already-encrypted data. This affects

btrfs: fix transaction abort when snapshotting received subvolumes

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort when snapshotting received subvolumes Currently a user can trigger a transaction abort by snapshotting a previously received snapshot a bunch of times until we reach a BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we can store in a leaf). This is very likely not common in practice, but if it happens, it turns the filesystem into RO mode. The snapshot, send and set_received_subvol and subvol_setflags (used by receive) don't require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user could use this to turn a filesy