Sicherheitslücken in linux-azure-fde-5.15 · Seite 188

drm/amdgpu: fix sync handling in amdgpu_dma_buf_move_notify

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix sync handling in amdgpu_dma_buf_move_notify Invalidating a dmabuf will impact other users of the shared BO. In the scenario where process A moves the BO, it needs to inform process B about the move and process B will need to update its page table. The commit fixes a synchronisation bug caused by the use of the ticket: it made amdgpu_vm_handle_moved behave as if updating the page table immediately was correct but in this case it's not. An example is the following scenario, with 2 GPUs and glxgears running on GPU0 and Xorg running on GPU1, on a system where

most: core: fix leak on early registration failure

In the Linux kernel, the following vulnerability has been resolved: most: core: fix leak on early registration failure A recent commit fixed a resource leak on early registration failures but for some reason left out the first error path which still leaks the resources associated with the interface. Fix up also the first error path so that the interface is always released on errors.

media: solo6x10: Check for out of bounds chip_id

In the Linux kernel, the following vulnerability has been resolved: media: solo6x10: Check for out of bounds chip_id Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type (literal "1" is an "int") could end up being shifted beyond 32 bits, so instrumentation was added (and due to the double is_tw286x() call seen via inlining), Clang decides the second one must now be undefined behavior and elides the rest of the function[1]. This is a known problem with Clang (that is still being worked on), but we can avoid the entire problem by actually checking the existing max chip ID, and now there is no runtime instrumentation added

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

KVM: nSVM: Remove a user-triggerable WARN on nested_svm_load_cr3() succeeding

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Remove a user-triggerable WARN on nested_svm_load_cr3() succeeding Drop the WARN in svm_set_nested_state() on nested_svm_load_cr3() failing as it is trivially easy to trigger from userspace by modifying CPUID after loading CR3. E.g. modifying the state restoration selftest like so: --- tools/testing/selftests/kvm/x86/state_test.c +++ tools/testing/selftests/kvm/x86/state_test.c @@ -280,7 +280,16 @@ int main(int argc, char *argv[]) /* Restore state in a new VM. */ vcpu = vm_recreate_with_one_vcpu(vm); -

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

dm: remove fake timeout to avoid leak request

In the Linux kernel, the following vulnerability has been resolved: dm: remove fake timeout to avoid leak request Since commit 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request"), drivers are responsible for calling blk_should_fake_timeout() at appropriate code paths and opportunities. However, the dm driver does not implement its own timeout handler and relies on the timeout handling of its slave devices. If an io-timeout-fail error is injected to a dm device, the request will be leaked and never completed, causing tasks to hang indefinitely. Reproduce: 1. prepare dm which has iscsi slave device 2. inject io-t

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4() In acpi_processor_errata_piix4(), the pointer dev is first assigned an IDE device and then reassigned an ISA device: dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB, ...); dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB_0, ...); If the first lookup succeeds but the second fails, dev becomes NULL. This leads to a potential null-pointer dereference when dev_dbg() is called: if (errata.piix4.bmisx) dev_dbg(&dev->dev, ...); To prevent this, use two temporary pointers and ret

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

media: i2c: ov5647: Initialize subdev before controls

In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov5647: Initialize subdev before controls In ov5647_init_controls() we call v4l2_get_subdevdata, but it is initialized by v4l2_i2c_subdev_init() in the probe, which currently happens after init_controls(). This can result in a segfault if the error condition is hit, and we try to access i2c_client, so fix the order.

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC

In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and g2 VPU cannot decode simultaneously; otherwise, it will cause below bus error and produce corrupted pictures, even potentially lead to system hang. [ 110.527986] hantro-vpu 38310000.video-codec: frame decode timed out. [ 110.583517] hantro-vpu 38310000.video-codec: bus error detected. Therefore, it is necessary to ensure that g1 and g2 operate alternately. This allows for successful multi-instance decoding of H.264 and HEVC. To a

md raid: fix hang when stopping arrays with metadata through dm-raid

In the Linux kernel, the following vulnerability has been resolved: md raid: fix hang when stopping arrays with metadata through dm-raid When using device-mapper's dm-raid target, stopping a RAID array can cause the system to hang under specific conditions. This occurs when: - A dm-raid managed device tree is suspended from top to bottom (the top-level RAID device is suspended first, followed by its underlying metadata and data devices) - The top-level RAID device is then removed Removing the top-level device triggers a hang in the following sequence: the dm-raid destructor calls md_stop(), which tries to flush the write-intent b

btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref()

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref() There is no need to BUG(), we can just return an error and log an error message.

libceph: define and enforce CEPH_MAX_KEY_LEN

In the Linux kernel, the following vulnerability has been resolved: libceph: define and enforce CEPH_MAX_KEY_LEN When decoding the key, verify that the key material would fit into a fixed-size buffer in process_auth_done() and generally has a sane length. The new CEPH_MAX_KEY_LEN check replaces the existing check for a key with no key material which is a) not universal since CEPH_CRYPTO_NONE has to be excluded and b) doesn't provide much value since a smaller than needed key is just as invalid as no key -- this has to be handled elsewhere anyway.

• Auf 5.15.0-1116.125~20.04.1 aktualisieren

drm/v3d: Set DMA segment size to avoid debug warnings

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Set DMA segment size to avoid debug warnings When using V3D rendering with CONFIG_DMA_API_DEBUG enabled, the kernel occasionally reports a segment size mismatch. This is because 'max_seg_size' is not set. The kernel defaults to 64K. setting 'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()' from complaining about the over-mapping of the V3D segment length. DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device claims to support [len=8290304] [max=65536] WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388 CPU:

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

btrfs: do not ASSERT() when the fs flips RO inside btrfs_repair_io_failure()

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not ASSERT() when the fs flips RO inside btrfs_repair_io_failure() [BUG] There is a bug report that when btrfs hits ENOSPC error in a critical path, btrfs flips RO (this part is expected, although the ENOSPC bug still needs to be addressed). The problem is after the RO flip, if there is a read repair pending, we can hit the ASSERT() inside btrfs_repair_io_failure() like the following: BTRFS info (device vdc): relocating block group 30408704 flags metadata|raid1 ------------[ cut here ]------------ BTRFS: Transaction aborted (error -28) WARNING: fs/btrfs/

octeontx2-af: Workaround SQM/PSE stalls by disabling sticky

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Workaround SQM/PSE stalls by disabling sticky NIX SQ manager sticky mode is known to cause stalls when multiple SQs share an SMQ and transmit concurrently. Additionally, PSE may deadlock on transitions between sticky and non-sticky transmissions. There is also a credit drop issue observed when certain condition clocks are gated. work around these hardware errata by: - Disabling SQM sticky operation: - Clear TM6 (bit 15) - Clear TM11 (bit 14) - Disabling sticky → non-sticky transition path that can deadlock PSE: - Clear TM5 (bit 23) - Preventing credit d

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net()

In the Linux kernel, the following vulnerability has been resolved: rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net() When idtab allocation fails, net is not registered with rio_add_net() yet, so kfree(net) is sufficient to release the memory. Set mport->net to NULL to avoid dangling pointer.

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

net: nfc: nci: Fix parameter validation for packet data

In the Linux kernel, the following vulnerability has been resolved: net: nfc: nci: Fix parameter validation for packet data Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data") communication with nci nfc chips is not working any more. The mentioned commit tries to fix access of uninitialized data, but failed to understand that in some cases the data packet is of variable length and can therefore not be compared to the maximum packet length given by the sizeof(struct).

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

kexec: derive purgatory entry from symbol

In the Linux kernel, the following vulnerability has been resolved: kexec: derive purgatory entry from symbol kexec_load_purgatory() derives image->start by locating e_entry inside an SHF_EXECINSTR section. If the purgatory object contains multiple executable sections with overlapping sh_addr, the entrypoint check can match more than once and trigger a WARN. Derive the entry section from the purgatory_start symbol when present and compute image->start from its final placement. Keep the existing e_entry fallback for purgatories that do not expose the symbol. WARNING: kernel/kexec_file.c:1009 at kexec_load_purgatory+0x395/0x3c0, CPU#10: k

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

ext4: move ext4_percpu_param_init() before ext4_mb_init()

In the Linux kernel, the following vulnerability has been resolved: ext4: move ext4_percpu_param_init() before ext4_mb_init() When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the `DOUBLE_CHECK` macro defined, the following panic is triggered: ================================================================== EXT4-fs error (device vdc): ext4_validate_block_bitmap:423: comm mount: bg 0: bad block bitmap checksum BUG: unable to handle page fault for address: ff110000fa2cc000 PGD 3e01067 P4D 3e02067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W

drm: Account property blob allocations to memcg

In the Linux kernel, the following vulnerability has been resolved: drm: Account property blob allocations to memcg DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized property blobs backed by kernel memory. Currently, the blob data allocation is not accounted to the allocating process's memory cgroup, allowing unprivileged users to trigger unbounded kernel memory consumption and potentially cause system-wide OOM. Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory is properly charged to the caller's memcg. This ensures existing cgroup memory limits apply and prevents uncontrolled kerne

• Auf 5.15.0-1117.126~20.04.2 aktualisieren

wifi: rtw88: 8822b: Avoid WARNING in rtw8822b_config_trx_mode()

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: 8822b: Avoid WARNING in rtw8822b_config_trx_mode() rtw8822b_set_antenna() can be called from userspace when the chip is powered off. In that case a WARNING is triggered in rtw8822b_config_trx_mode() because trying to read the RF registers when the chip is powered off returns an unexpected value. Call rtw8822b_config_trx_mode() in rtw8822b_set_antenna() only when the chip is powered on. ------------[ cut here ]------------ write RF mode table fail WARNING: CPU: 0 PID: 7183 at rtw8822b.c:824 rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b] CPU: 0