Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
power: supply: max17040: synchronize work cancellation on suspend
In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: synchronize work cancellation on suspend
max17040_work() requeues itself after every poll. cancel_delayed_work()
only cancels a pending instance and does not wait for a callback that is
already running.
If system suspend races with the polling callback, the callback can
continue accessing the fuel gauge and requeue itself after the suspend
callback returns.
Use cancel_delayed_work_sync() to ensure polling is quiesced before
suspend completes.
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
s390/dasd: Do not complete a failed ESE read as successful
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Do not complete a failed ESE read as successful
dasd_int_handler() completes an NRF read of an unallocated ESE track by
calling ese_read() and unconditionally marking the request
DASD_CQR_SUCCESS. dasd_eckd_ese_read() can return an error before it has
zeroed the destination buffer: a failed sense-data parse or a current
track outside the requested range both return early, leaving the
destination pages untouched. The request is still completed successfully,
so the block layer is handed stale / uninitialized memory instead of
zeros.
Check the ese_read() return val
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
s390/dasd: Guard sysfs discipline callbacks against unallocated private data
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Guard sysfs discipline callbacks against unallocated private data
Several sysfs show/store handlers call a discipline callback that
dereferences device->private, either directly or through the
DASD_DEFINE_ATTR() macro. During dasd_generic_set_online() the discipline
is assigned before check_device() allocates device->private, so an
unprivileged read of one of these world-readable attributes in that window
dereferences a NULL pointer and panics.
Guard the dereference inside each callback that actually touches
device->private.
s390/dasd: Propagate partial completion length across ERP recovery
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Propagate partial completion length across ERP recovery
dasd_default_erp_postaction() copies the timing and device state from
the finished ERP request back to the original request but drops
proc_bytes. A request that was partially completed, an ESE read of a
not-yet-allocated track returns fewer bytes than requested, and then
recovered through the ERP chain loses its partial-completion length.
__dasd_cleanup_cqr() then sees proc_bytes == 0 and completes the whole
request instead of requeueing the remainder, silently returning zeroed
data for the part that was nev
iommu/msm: Unwind probe state on registration failure
In the Linux kernel, the following vulnerability has been resolved:
iommu/msm: Unwind probe state on registration failure
msm_iommu_probe() adds its devm-managed IOMMU object to
qcom_iommu_devices before adding the IOMMU sysfs device and registering
it with the IOMMU core.
If iommu_device_sysfs_add() fails, probe returns with the object still on
qcom_iommu_devices. The driver core then releases the devm allocation,
leaving a dangling list entry that later list walks may dereference.
If iommu_device_register() fails, the same dangling list entry remains
and the sysfs device is left registered as well.
Unwind the sysfs device and global li
iommu/vt-d: Force requesting ACS when tboot is enabled
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Force requesting ACS when tboot is enabled
Currently the conditions of requesting ACS in detect_intel_iommu()
don't include tboot, leading to a possible misconfiguration with ACS
disabled (e.g. due to user opts) while iommu is later forced on by
tboot_force_iommu().
Fix it by checking tboot in detect_intel_iommu().
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Don't hex dump attribute security buffer
set_attribute() populates the security area of the BIOS attribute request
buffer with the current admin password via populate_security_buffer(), then
dumps the whole request buffer with print_hex_dump_bytes(). This can expose
the plaintext admin password in the kernel log.
The same issue was fixed for the password attribute path by
commit d1a196e0a6dc ("platform/x86: dell-wmi-sysman: Don't hex dump
plaintext password data"). Remove the remaining dump from the BIOS
attribute path.
In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: cancel card-detect work on remove
Disabling the device interrupt and freeing the IRQ prevents new card-detect
work from being queued, but carddet_work already queued by the handler can
still run after via_sd_remove() returns. via_sdc_card_detect() recovers the
host through container_of() and dereferences its MMIO base; once remove()
returns the host can be freed, so that work would touch freed memory.
Cancel carddet_work after freeing the IRQ and before cancelling
finish_bh_work, which the card-detect handler can also queue. carddet_work
can re-enable the i
mmc: via-sdmmc: stop card-detect handling on probe failure
In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: stop card-detect handling on probe failure
request_irq() registers the SD card-detect interrupt and the probe enables
it before mmc_add_host() runs. If mmc_add_host() fails, the error path only
unmaps the registers and returns: the interrupt stays registered, so the
handler keeps running against the host once it is freed. via_sdc_isr()
dereferences sdhost and its MMIO base and schedules carddet_work, which
via_sdc_card_detect() also runs against freed memory through its
container_of() dereference.
Add a probe-error path that disables and frees the interrupt
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
platform/x86: int1092: Fix potential memory leak in sar_probe()
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: int1092: Fix potential memory leak in sar_probe()
The memory allocated for device_mode_info in parse_package() called by
sar_get_data() is not freed in some of the error paths in sar_probe().
Fix that by converting to use device managed allocations.
platform/chrome: sensorhub: Bound the EC-reported sensor number
In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Bound the EC-reported sensor number
Each EC FIFO event carries an 8-bit sensor number (in->sensor_num).
cros_ec_sensorhub_ring_handler() validates the FIFO event count, the
per-read count and the ring bound, but not the sensor number, which
cros_ec_sensor_ring_process_event() then uses unchecked to index
sensorhub->batch_state[] - allocated with only sensorhub->sensor_num
entries. A sensor number of sensor_num or larger is an out-of-bounds
read and write of batch_state[].
Validate the sensor number in the ring handler, where each event is read
f
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
In the Linux kernel, the following vulnerability has been resolved:
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
In of_icc_get_by_index() and icc_get(), if the dynamic allocation for
path->name fails via kasprintf(), the error handling path directly
calls kfree(path) to free the path object and returns an error.
However, prior to this point, path_find() calls path_init(), which
already links the path's requests into the req_list of the respective
interconnect nodes via hlist_add_head(). Directly invoking kfree(path)
leaves dangling pointers in the hlist. A subsequent call to icc_get()
or icc_set_bw() will travers
In the Linux kernel, the following vulnerability has been resolved:
ipmi: ipmb: validate write message length
ipmb_write() read message fields before validating the length byte.
A zero or short write can read uninitialized stack bytes.
A length smaller than the SMBus header underflows the block write length.
Require a non-empty buffer and the minimum IPMB request length.
Also require the length byte plus payload before parsing the message.
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
ipmi: si: Fix NULL pointer dereference after failed registration
In the Linux kernel, the following vulnerability has been resolved:
ipmi: si: Fix NULL pointer dereference after failed registration
try_smi_init() allocates new_smi->si_sm and later calls
ipmi_register_smi_mod(), which maps to ipmi_add_smi().
During ipmi_add_smi(), the upper IPMI message handler obtains the
initial BMC device information through __bmc_get_device_id(). This can
fail if the BMC does not return a successful response to the Get Device
ID command.
When the BMC returns a nonzero completion code, the device-id helper
retries the command and eventually returns -EIO if the device ID still
cannot be fetched.
On this failure path,
net/iucv: filter frames in afiucv_hs_rcv() by ingress device
In the Linux kernel, the following vulnerability has been resolved:
net/iucv: filter frames in afiucv_hs_rcv() by ingress device
afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte
name fields in the transport header alone. No check is made against the
net_device the frame arrived on.
This can cause a frame arriving on any netdev to be delivered to an AF_IUCV
socket. Three problems follow.
First, a frame arriving over HiperSockets can be delivered to a socket
bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL.
iucv_sock_bind() takes the classic path whenever the requested userid
matches iucv_us
In the Linux kernel, the following vulnerability has been resolved:
xdp: fix zero-copy frame layout
xdp_convert_zc_to_xdp_frame() clones an XSK packet into an order-0 page
and advertises PAGE_SIZE as its frame size. It allows the copied frame
to occupy the page tail needed by skb_shared_info and records zero
headroom even when metadata separates the frame header from packet data.
An AF_XDP zero-copy packet redirected through cpumap can therefore make
the skb overlap skb_shared_info or place it beyond the allocated page.
Limit the copied layout to SKB_WITH_OVERHEAD(PAGE_SIZE) and include the
metadata length in frame headroom. Redirect cal
In the Linux kernel, the following vulnerability has been resolved:
slip: fix use-after-free in sl_sync()
slip_devs[] stores bare net_device pointers and takes no reference on
them. sl_sync() and sl_alloc() walk that table from slip_open() under
rtnl_lock(), while an entry is dropped by sl_free_netdev(), which
sl_setup() installs as dev->priv_destructor.
priv_destructor is called from netdev_run_todo(), which deliberately
runs with the RTNL semaphore released so that it can sleep while waiting
for the device refcount to drop:
/* Snapshot list, allow later requests */
list_replace_init(&net_todo_list, &list);
__rtnl_unlock();
...
i
In the Linux kernel, the following vulnerability has been resolved:
net: tun: bound receive headroom
tun_get_user() uses tun->align both as skb headroom and when choosing how
much packet data to keep linear. OVS can propagate an oversized headroom
request from another port to TUN or TAP.
When align is larger than the usable space in a one-page skb head,
SKB_MAX_HEAD(align) underflows and the result becomes negative when stored
in good_linear. That value later wraps when assigned to the size_t linear
variable, and tun_alloc_skb() can place skb->data outside the allocated
head.
Bound the headroom stored by TUN to the one-page skb-head budge
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO
In the Linux kernel, the following vulnerability has been resolved:
net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO
rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from
the probe path, which may sleep and is not timing-critical. When the
reset GPIO is provided by a sleeping controller such as an I2C I/O
expander, gpiod_set_value() warns:
WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61
Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)
Workqueue: events_unbound deferred_probe_work_func
pc : gpiod_set_value+0x44/0x80
lr : rtl83xx_probe+0x1d8/0x3a0
Call t
net: l2tp: do not propagate multicast notification errors
In the Linux kernel, the following vulnerability has been resolved:
net: l2tp: do not propagate multicast notification errors
The tunnel create, tunnel modify, session create, and session modify
netlink handlers send multicast notifications through helpers that can fail
while allocating or encoding a message, or while multicasting it.
For tunnel and session create/modify, a notification is sent after the live
operation has completed. Returning a best-effort notification error as the
command result can therefore report failure for an operation that already
committed and can cause callers to retry and accumulate live objects.
Keep sending n