p PatchFirst

PatchFirst · Aktuelle Sicherheitslücken

Sicherheitslücken in linux-lowlatency-hwe-5.15 · Seite 14

In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux-lowlatency-hwe-5.15: 592. Davon im KEV-Katalog: 0.

RSS ↗ JSON ↗
Sicherheitslücken filtern
Filter zurücksetzen

Sicherheitslücken: 6473

  1. CVE-2026-98752

    Hoch · CVSS 7.3EPSS 0,17%Keine Korrektur veröffentlicht

    tty: port: fix tty_port_tty_vhangup() race

    In the Linux kernel, the following vulnerability has been resolved: tty: port: fix tty_port_tty_vhangup() race Drivers rely on tty_port_tty_vhangup() to synchronously hang up their ports before tearing down resources as part of deregistration (e.g. on physical disconnect). If tty_port_tty_vhangup() races with another hangup it may however return before the port has been shut down. This is in turn can lead to use-after-free and NULL-pointer dereferences in racing ioctls (including a synchronous hangup) and in processing of racing asynchronous hangups (carrier loss). Add the missing serialisation to tty_port_tty_vhangup() and tty_port_hangu

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  2. CVE-2026-98751

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    tty: abort break signalling on hangup

    In the Linux kernel, the following vulnerability has been resolved: tty: abort break signalling on hangup The break ioctls can race with hangup and end up calling into a tty driver for a device that is already gone or powered down. Drivers must handle this race, but TCSBRK and TCSBRKP should still be aborted to avoid calling back into the driver after a user-controlled timeout (possibly even after the tty has been reopened). Note that drivers should disable any break state on shutdown so just return on hangup (calling break_ctl() again is racy and will most likely fail for drivers handling the race).

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  3. CVE-2026-98750

    Mittel · CVSS 5.4EPSS 0,17%Keine Korrektur veröffentlicht

    tty: fix saved termios reset race

    In the Linux kernel, the following vulnerability has been resolved: tty: fix saved termios reset race Resetting saved termios state on device registration is needed where a minor number can be reused for an entirely different device and where the old settings may prevent the port from even being opened (e.g. when CLOCAL is not set). Not all TTY drivers guarantee that the minor number is no longer in use when registering devices however, something which can lead to a use-after-free when closing a TTY (and saving its termios) races with re-registration. Add a new TTY_DRIVER_RESET_SAVED_TERMIOS flag to request that any saved termios state is

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  4. CVE-2026-98749

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    tty: serial: max3100: shut down timer before freeing port

    In the Linux kernel, the following vulnerability has been resolved: tty: serial: max3100: shut down timer before freeing port max3100_shutdown() stops the polling timer but returns early during system suspend. If the SPI device is unbound before resume, the serial core does not call max3100_shutdown() again, so max3100_remove() frees the port while the timer remains armed. max3100_timeout() may then access the freed port and re-arm the timer. Add final timer teardown to max3100_remove() and use timer_shutdown_sync() to prevent a racing callback from re-arming it. Also free the IRQ and destroy the workqueue there before freeing the port. Ke

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  5. CVE-2026-98748

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    serial: 8250_bcm7271: fix use-after-free in brcmuart_remove()

    In the Linux kernel, the following vulnerability has been resolved: serial: 8250_bcm7271: fix use-after-free in brcmuart_remove() brcmuart_handle_irq() starts priv->hrt to work around a receive-timeout quirk of the 8250 core when hardware flow control is enabled; the timer callback brcmuart_hrtimer_func() dereferences priv. brcmuart_remove() cancels the hrtimer before it unregisters the port, so a receive-timeout interrupt that arrives in between re-arms the timer. After devm frees priv, the callback runs on freed memory. Unregister the port before cancelling the hrtimer. serial8250_unregister_port() shuts the port down and frees its IRQ,

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  6. CVE-2026-98742

    Hoch · CVSS 7.3EPSS 0,17%Keine Korrektur veröffentlicht

    ALSA: seq: Serialize compat port-info ioctls

    In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Serialize compat port-info ioctls The native sequencer ioctl path serializes handler calls with client->ioctl_mutex, but the translated port-info compat path invokes the same handlers through snd_seq_kernel_client_ctl() without taking that mutex. This lets concurrent compat CREATE_PORT requests pass the port-count check before any request reaches the serialized insertion. The computed integer port index can then exceed the address field range and wrap to an existing index. Subsequent subscriber teardown can resolve the duplicate address to the wrong port and acc

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  7. CVE-2026-98741

    Hoch · CVSS 7EPSS 0,17%Keine Korrektur veröffentlicht

    ALSA: ua101: reject mismatched capture/playback packet sizes

    In the Linux kernel, the following vulnerability has been resolved: ALSA: ua101: reject mismatched capture/playback packet sizes detect_usb_format() cross-checks bSubframeSize, bBitResolution and tSamFreq between the capture and playback interfaces, but never relates the two endpoints' wMaxPacketSize and bNrChannels. Each playback URB gets a buffer of ua->playback.max_packet_bytes, while the number of bytes written into it is derived from the capture stream: capture_urb_complete() computes frames from the received capture packet and capture.frame_bytes, and start_usb_playback() and playback_work() multiply that by playback.frame_bytes. A

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  8. CVE-2026-98740

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    EDAC/altera: Drop __init from ECC setup paths for re-probe safety

    In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Drop __init from ECC setup paths for re-probe safety Sashiko reports: "Does suppressing sysfs unbinding fully prevent the execution of freed __init memory? If altr_sysmgr_regmap_lookup_by_phandle() returns -EPROBE_DEFER, the probe is deferred until after __init memory is freed." The a10 EDAC .setup callbacks (sdmmc, ethernet, nand, dma, usb, qspi) and their helpers (altr_init_a10_ecc_device_type, altr_init_a10_ecc_block) were marked __init. These run from the probe path, which may execute after init memory is freed -- e.g. a probe deferred via -EPROBE_DEFER t

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  9. CVE-2026-98739

    Hoch · CVSS 7.3EPSS 0,17%Keine Korrektur veröffentlicht

    Bluetooth: RFCOMM: Fix initial port reference race

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix initial port reference race For RFCOMM_RELEASE_ONHUP devices, rfcomm_tty_install() and __rfcomm_release_dev() both use RFCOMM_TTY_OWNED to decide who drops the initial tty_port reference. The release path tests the bit separately from the install path setting it, so both can drop that reference. The synchronous hangup does not prevent this race: port->tty is not assigned until tty_port_open(), after installation. The following interleaving is possible: 1. Install and release each obtain a reference with rfcomm_dev_get(). 2. Release observes RFCO

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  10. CVE-2026-98738

    Hoch · CVSS 7.1EPSS 0,17%Keine Korrektur veröffentlicht

    Bluetooth: Serialize SMP remote OOB data access

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Serialize SMP remote OOB data access build_pairing_cmd() looks up remote OOB data and copies its contents without holding hdev->lock, which serializes the list's writers. After SMP finds an entry, a concurrent management Remove Remote OOB Data command can unlink and free it before SMP reads its present flag or copies its random and confirmation values. Removal can also invalidate an entry while the lookup is still traversing the list. KASAN reported: BUG: KASAN: slab-use-after-free in build_pairing_cmd+0x948/0x9b0 Call Trace: build_pairing_cmd+0x948/0x9b

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  11. CVE-2026-98735

    Hoch · CVSS 7.3EPSS 0,17%Keine Korrektur veröffentlicht

    Bluetooth: hci_core: Serialize ACL scheduling with channel deletion

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize ACL scheduling with channel deletion hci_chan_sent() selects a channel under RCU but drops the read lock before accessing chan->conn and returning the channel. The ACL and LE schedulers then use its packet queue and update its transmit counters without any protection against channel deletion. After TX selects a channel and releases RCU, a disconnect command timeout on the separate request workqueue can run hci_conn_failed() and l2cap_conn_del(). hci_chan_del() can then unlink the channel, complete synchronize_rcu(), purge its queue and free i

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  12. CVE-2026-98734

    Hoch · CVSS 7.3EPSS 0,17%Keine Korrektur veröffentlicht

    Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown hci_low_sent() selects a connection under RCU but drops the read lock before calculating its quota and returning it to the scheduler. The connection is then used without lifetime protection by hci_sched_iso() and hci_sched_sco(). After the TX worker drops the RCU read lock, hci_abort_conn_sync() on hdev->req_workqueue can remove the connection from the hash, complete synchronize_rcu(), purge its queues and release it. The TX worker on hdev->workqueue can then access the freed connection in hci_quote_sent()

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  13. CVE-2026-98732

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    Bluetooth: btintel: fix buffer over-read in btintel_hw_error()

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: fix buffer over-read in btintel_hw_error() The "Exception info %s" print uses skb->data + 1, but the 12-byte payload is not guaranteed to be NUL-terminated and can be read past its end. Bound the print with "%.*s" and skb->len - 1.

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  14. CVE-2026-98726

    Mittel · CVSS 5.2EPSS 0,2%Keine Korrektur veröffentlicht

    nvme-multipath: fix underflow in ANA log bounds checks

    In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix underflow in ANA log bounds checks The number of ANA groups advertised through Identify Controller sizes the ANA log buffer. The ANA log header and group descriptors independently supply the number of groups and namespace IDs to parse. Both bounds checks subtract an untrusted object size from ana_log_size before comparing the current offset. If the object is larger than the buffer, the size_t subtraction underflows and lets the parser read beyond ana_log_buf. Check the current offset before the first subtraction and compare each object size with the re

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  15. CVE-2026-98722

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    mtd: block2mtd: Fix divide error when erase_size is zero

    In the Linux kernel, the following vulnerability has been resolved: mtd: block2mtd: Fix divide error when erase_size is zero The erase size is parsed from the "block2mtd" module parameter and can be set to zero. add_device() then evaluates if (size % erase_size) with a zero divisor, which triggers a divide error: divide error: 0000 [#1] PREEMPT SMP PTI RIP: 0010:add_device drivers/mtd/devices/block2mtd.c:296 [inline] RIP: 0010:block2mtd_setup2+0x592/0xda0 drivers/mtd/devices/block2mtd.c:459 Call Trace: block2mtd_setup+0x27/0xe0 drivers/mtd/devices/block2mtd.c:476 param_attr_store+0x214/0x310 kernel/params.c:589 module_attr_store+

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  16. CVE-2026-98721

    Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht

    mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ

    In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ The Cadence NAND interrupt handler uses both the IRQ lock and completion object. Registering the IRQ before initializing them leaves a window in which a pending interrupt can access uninitialized synchronization state. Initialize them before registering the handler.

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  17. CVE-2026-98716

    Mittel · CVSS 4.8EPSS 0,17%Keine Korrektur veröffentlicht

    KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted

    In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted Use the MSR permission bitmap of the active VMCB instead of assuming that KVM is always using vmcb02's bitmap when L2 is active, as KVM uses msrpm02 if and only if L1 wants to intercept MSR accesses, i.e. if and only if KVM needs to merge msprm01 with msrpm12. Don't bother tracking the virtual address of the bitmap that's being used, as __va() is cheap on x86, and caching the virtual address would introduce yet another source of potentially stale information.

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  18. CVE-2026-98715

    Niedrig · CVSS 1.8EPSS 0,19%Keine Korrektur veröffentlicht

    KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN

    In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN Don't reset the VMCB's TLB control back to "do nothing" on a failed VMRUN, as empirical testing shows that the CPU performs the requested TLB flush if and only if VMRUN is successful, i.e. clearing TLB control on a failed VMRUN effectively drops a TLB flush. Explicitly track the need to flush all ASIDs on a per-CPU basis, as the ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus, this also obviates the need to avoid clobbering FLUSH_ALL_ASID with TLB_CONTROL_FLUSH_ASID, e.g. in svm_

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  19. CVE-2026-98714

    Niedrig · CVSS 1.8EPSS 0,15%Keine Korrektur veröffentlicht

    KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded

    In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded Leave control.erap_ctl and control.clean as-is in the VMCS if VMRUN fails, because as per AMD: there's no explicit architectural guarantee about the behavior in the presence of VMRUN failures. So the best thing to do would be to assume that if VMRUN fails, the actions requested in the control fields may not have been performed.

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  20. CVE-2026-98711

    Niedrig · CVSS 2.4EPSS 0,17%Keine Korrektur veröffentlicht

    wifi: cw1200: fix TX padding OOB read leaking heap data to device

    In the Linux kernel, the following vulnerability has been resolved: wifi: cw1200: fix TX padding OOB read leaking heap data to device The TX path rounds the transfer size up to the bus alignment (align_size(), up to 511 bytes for SDIO, 1 byte for SPI) but sends the padded length straight from the frame buffer, which has no room reserved for the padding. cw1200_data_write() therefore reads past the end of the frame and the bus transfer carries those bytes to the device. A bogus device can collect up to 511 bytes of kernel heap data per TX frame. The RX path does not have this problem: it allocates the skb with the aligned length (alloc_le

    linux-lowlatency-hwe-5.15Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

Prüfen Sie Ihren Server

Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.

Prüfen Sie Ihren Server →