p PatchFirst

PatchFirst · Aktuelle Sicherheitslücken

Sicherheitslücken in linux-xilinx-zynqmp · Seite 8

In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux-xilinx-zynqmp: 464. Davon im KEV-Katalog: 0.

RSS ↗ JSON ↗
Sicherheitslücken filtern
Filter zurücksetzen

Sicherheitslücken: 5452

  1. CVE-2026-98884

    Nicht bewertetEPSS 0,19%Keine Korrektur veröffentlicht

    mmc: core: Add validation for host-provided max_segs

    In the Linux kernel, the following vulnerability has been resolved: mmc: core: Add validation for host-provided max_segs The max_segs field is of type unsigned short, and if a host driver sets an excessively large value, it may be truncated to zero. This can cause mmc_alloc_sg() to call kmalloc_objs() with a zero size allocation request, which leads to undefined behavior. Under the SLUB allocator, kmalloc(0) returns a special pointer (ZERO_SIZE_PTR). The subsequent 'if (sg)' check will evaluate to true, and sg_init_table() will then attempt to access invalid memory, resulting in a crash: dwmmc_rockchip 2a310000.mmc: Successfully tuned pha

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  2. CVE-2026-98883

    Nicht bewertetEPSS 0,16%Keine Korrektur veröffentlicht

    serial: 8250_port: recognize UPIO_AU

    In the Linux kernel, the following vulnerability has been resolved: serial: 8250_port: recognize UPIO_AU My MIPS Alchemy systems generate the following warning during probe of the 8250 driver: WARNING: drivers/tty/serial/8250/8250_port.c:462 at set_io_from_upio+0xfc/0x124, CPU#0: swapper/0/1 Unsupported UART type 4 [...] [<80521d40>] set_io_from_upio+0xfc/0x124 [<80521dfc>] serial8250_set_defaults+0x94/0xe0 [<80520fb4>] serial8250_register_8250_port+0x288/0x51c [<805214ec>] serial8250_probe+0x160/0x1e8 [<8053b5f0>] platform_probe+0x64/0x90 The least invasive fix is to recognize UPIO_AU (type 4) in set_io_from_upio() and do nothing, since

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  3. CVE-2026-98882

    Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht

    media: chips-media: wave5: Add range checks for dec_output_info

    In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Add range checks for dec_output_info If the driver's dec_output_info contains invalid data the driver can write in invalid memory. Add a range check for that. This fixes this smatch error: drivers/media/platform/chips-media/wave5/wave5-vpuapi.c:588 wave5_vpu_dec_get_output_info() error: buffer overflow 'inst->frame_buf' 64 <= 127

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  4. CVE-2026-98881

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    net: bridge: remove stale rcu_barrier() in br_multicast_dev_del()

    In the Linux kernel, the following vulnerability has been resolved: net: bridge: remove stale rcu_barrier() in br_multicast_dev_del() This rcu_barrier() came from a time call_rcu() calls were used in net/bridge/br_multicast.c. Now kfree_rcu() is there, we can remove this problematic rcu_barrier() which causes extreme RTNL pressure in many syzbot reports. INFO: task syz-executor:77945 is blocked on a mutex likely owned by task kworker/u1024:5:36537. task:kworker/u1024:5 state:D stack:24616 pid:36537 tgid:36537 ppid:2 task_flags:0x4208060 flags:0x00080000 last_sleep:612797637337 Workqueue: netns cleanup_net Call Trace: <TASK> [<ffff

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  5. CVE-2026-98880

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    ntfs3: handle set_blocksize failures

    In the Linux kernel, the following vulnerability has been resolved: ntfs3: handle set_blocksize failures ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  6. CVE-2026-98879

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    isofs: handle set_blocksize failures

    In the Linux kernel, the following vulnerability has been resolved: isofs: handle set_blocksize failures isofs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  7. CVE-2026-98878

    Nicht bewertetEPSS 0,19%Keine Korrektur veröffentlicht

    irqchip/gic-v5: Immediately exec priority drop following activate

    In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Immediately exec priority drop following activate With GICv5 an interrupt of equal or lower priority cannot be signalled until there has been a priority drop. This is done via the GIC CDEOI system instruction. Once this has been executed, the hardware is able to signal the next interrupt if there is one. As all interrupts are programmed to have the same priority, no new interrupts can be signalled until the priority drop has happened. This can cause issues when, for example, an interrupt remains active while a long running process takes place, such as when

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  8. CVE-2026-98877

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed

    In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has no MSI controller device tree node and GICv4, it results a panic as “gic_domain” is NULL and the kernel attempts to access it. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Mem abort info: ESR = 0x0000000096000006 CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 81402005 (Nzcv daif +PAN -UAO -TCO

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  9. CVE-2026-98876

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    host1x: bus: Fix missing ops null check in error teardown

    In the Linux kernel, the following vulnerability has been resolved: host1x: bus: Fix missing ops null check in error teardown In host1x_device_init(), the error teardown paths do not check client->ops before dereferencing it, unlike the forward init paths which correctly guard with 'client->ops &&'. This can result in a NULL pointer dereference if client->ops is NULL. Fix by adding the missing client->ops check in both the teardown and teardown_late labels.

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  10. CVE-2026-98875

    Nicht bewertetEPSS 0,16%Keine Korrektur veröffentlicht

    drm/nouveau/gsp: add SEC2 to GA100 chip table

    In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/gsp: add SEC2 to GA100 chip table The booter-load and booter-unload firmware run on the SEC2 falcon. During tu102_gsp_oneinit(), the booter constructor needs device->sec2 to access the SEC2 falcon. Without the .sec2 entry, device->sec2 is NULL and this dereference crashes during GSP-RM boot.

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  11. CVE-2026-98874

    Nicht bewertetEPSS 0,19%Keine Korrektur veröffentlicht

    wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect

    In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect Clearly, from a user perspective, it must be valid to configure WoWLAN and then suspend while not connected to a network. Since mac80211 doesn't distinguish these cases and simply calls the driver to suspend whenever WoWLAN is configured, the driver has to cleanly handle the case where it's called for WoWLAN, it's not connected but there's also no netdetect configured. Remove the WARN_ON() and keep returning 1 to disconnect and then suspend.

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  12. CVE-2026-98873

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    netfilter: nf_conntrack_expect: zero at allocation time

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: zero at allocation time There are occasional LLM hints wrt. leaking uninitialized data to userspace via ctnetlink. Just zero at allocation time, expectations are not frequently used these days. Intentionally keeps _init as-is because we could theoretically support re-init, so add the missing exp->dir there.

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  13. CVE-2026-98872

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    freevxfs: don't BUG() on unknown typed-extent type

    In the Linux kernel, the following vulnerability has been resolved: freevxfs: don't BUG() on unknown typed-extent type vxfs_bmap_typed() handles four typed-extent types and calls BUG() in its default case, so an on-disk typed extent with any other type value crashes the kernel. It is reachable from ioctl(FIBMAP) on a regular file: kernel BUG at fs/freevxfs/vxfs_bmap.c:230! RIP: vxfs_bmap_typed fs/freevxfs/vxfs_bmap.c:230 [inline] vxfs_bmap1+0x128a/0x12d0 fs/freevxfs/vxfs_bmap.c:257 Replace the BUG() with WARN_ON_ONCE() and return 0 -- the value vxfs_bmap_typed() already returns on failure (and from the DEV4 case above); vxfs_ge

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  14. CVE-2023-7356

    Hoch · CVSS 8.8EPSS 0,29%Keine Korrektur veröffentlicht

    Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  15. CVE-2026-98863

    Hoch · CVSS 8.4EPSS 0,15%Keine Korrektur veröffentlicht

    KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails

    In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails Re-pend GET_NESTED_STATE_PAGES before exiting to userspace if getting the nested pages fails in the KVM_RUN path. If userspace re-runs the vCPU, and vmcs02 holds valid PFNs from the *previous* run of L2, then KVM could re-enter L2 with stale, unpinned PFNs mapped into e.g. the vAPIC page. Note, both SVM and VMX (as of commit 11722439fb20 ("KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit") ensure the request is cleared on VM-Exit (including the "forced" case), i.e. there is no risk

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  16. CVE-2026-98862

    Hoch · CVSS 7.1EPSS 0,16%Keine Korrektur veröffentlicht

    audit: fix exe mark UAF in kill_rules()

    In the Linux kernel, the following vulnerability has been resolved: audit: fix exe mark UAF in kill_rules() kill_rules() removes mixed AUDIT_DIR and AUDIT_EXE rules when an audit tree is pruned. It drops entry->rule.exe before removing the rule from the RCU-visible filter lists. After a rule has been installed with AUDIT_ADD_RULE, which requires CAP_AUDIT_CONTROL, removing the watched directory can race with another task that is still evaluating the rule. In that case, fsnotify can free the executable mark before the reader reaches audit_mark_compare(), causing a use-after-free. KASAN reports: BUG: KASAN: slab-use-after-free in audit

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  17. CVE-2026-98859

    Mittel · CVSS 5.4EPSS 0,16%Keine Korrektur veröffentlicht

    HID: multitouch: stop the release timer from being rearmed on remove

    In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: stop the release timer from being rearmed on remove mt_remove() quiesces the sticky-finger timer before stopping the hardware: timer_delete_sync(&td->release_timer); sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group); hid_hw_stop(hdev); timer_delete_sync() waits for a running callback and dequeues the timer, but it does not stop the timer from being armed again. The transport is still delivering reports at that point, and the report path rearms it: if (app->quirks & MT_QUIRK_STICKY_FINGERS) { if (td->mt_io_flags & MT_IO_SLO

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  18. CVE-2026-98857

    Mittel · CVSS 6.8EPSS 0,16%Keine Korrektur veröffentlicht

    ipvs: bound LBLCR and LBLC cache growth

    In the Linux kernel, the following vulnerability has been resolved: ipvs: bound LBLCR and LBLC cache growth ip_vs_lblcr_new() and ip_vs_lblc_new() create cache entries for every previously unseen destination address. The table max_size only tells the periodic collector to reclaim entries after the cache has already exceeded the limit. It does not reclaim entries that the attacker continues to use. Reject new cache entries once either table reaches max_size * 3 / 2. The extra headroom lets the periodic collector catch up while the existing scheduler fallback continues to use the selected destination when cache creation fails. New traffic th

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  19. CVE-2026-98856

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    kprobes: Skip disarmed probes when checking optkprobe overlap

    In the Linux kernel, the following vulnerability has been resolved: kprobes: Skip disarmed probes when checking optkprobe overlap On x86, an optkprobe at A replaces five bytes with a jump. If a disabled probe B is at A+2, get_optimized_kprobe() stops at B when arming a new probe C at A+4. It leaves A optimized: A A+1 A+2 A+3 A+4 A's jump | e9 | d0 | d1 | d2 | d3 | after C | e9 | d0 | d1 | d2 | cc | The INT3 for C overwrites the last byte of A's jump displacement, so execution can jump to the wrong address. B can have prepared optinsns while disarmed, but has no jump to unoptimize. Continue past disarmed and unp

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  20. CVE-2026-98855

    Nicht bewertetEPSS 0,16%Keine Korrektur veröffentlicht

    of/overlay: put property on deadprops only after changeset add succeeds

    In the Linux kernel, the following vulnerability has been resolved: of/overlay: put property on deadprops only after changeset add succeeds add_changeset_property() links a new property of a not-yet-live target node into the node's deadprops list before handing it to of_changeset_add_property(). If that fails, the error path frees the property but leaves the freed pointer linked in deadprops, and of_node_release() frees it a second time when the aborted overlay's node is released. Record the changeset entry first and link the property into deadprops only on success. of_changeset_add_property() never looks at the node's property lists, so t

    linux-xilinx-zynqmpBetriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

Prüfen Sie Ihren Server

Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.

Prüfen Sie Ihren Server →