Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
virtio_console: do not free control-out buffers on remove
In the Linux kernel, the following vulnerability has been resolved:
virtio_console: do not free control-out buffers on remove
__send_control_msg() publishes &portdev->cpkt as the control-out
virtqueue cookie. remove_vqs() walks every virtqueue and passes leftover
cookies to free_buf(), which treats them as struct port_buffer and
reads sgpages.
If a control message is still on c_ovq when the device is unbound,
free_buf() reads past the ports_device object.
KASAN reported slab-out-of-bounds in free_buf():
free_buf
remove_vqs
virtcons_remove
unbind_store
The object was the ports_device allocated in virtcons_probe().
Drain c_ovq withou
vhost: invalidate vring access on IOTLB transitions
In the Linux kernel, the following vulnerability has been resolved:
vhost: invalidate vring access on IOTLB transitions
When VIRTIO_F_ACCESS_PLATFORM changes, cached vring pointers and IOTLB
metadata are interpreted in a different address space. Keeping them
across the transition can leave stale ring mappings in use.
Clearing d->iotlb before taking the VQ locks also lets a worker observe
a transient NULL d->iotlb and fall back to d->umem while translating a
descriptor.
Add a common vhost_clear_device_iotlb() helper for vhost-net and
vhost-vsock. Take all VQ mutexes in index order before dropping the
device-wide IOTLB, invalidate each VQ's
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
virtio_input: reset device if input_register_device() fails
In the Linux kernel, the following vulnerability has been resolved:
virtio_input: reset device if input_register_device() fails
Probe marks the device DRIVER_OK with virtio_device_ready() before
calling input_register_device(). If registration fails, the error path
cleared vi->ready and called del_vqs() while the device was still live,
so the device could keep DMA to queues that were already torn down.
Match remove/freeze: call virtio_reset_device() on that path before
tearing down the virtqueues.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
virtio_input: stop callbacks before unregistering input device
In the Linux kernel, the following vulnerability has been resolved:
virtio_input: stop callbacks before unregistering input device
virtinput_remove() unregisters the input device before resetting the
virtio device. virtinput_recv_events() drops vi->lock around input_event(),
so clearing vi->ready does not stop a callback that passed the entry check.
It can still use vi->idev, requeue buffers and kick the queue.
Reset first, as virtinput_freeze() already does. With the preceding core
change, reset waits for callbacks before input_unregister_device() can
free vi->idev. Recheck vi->ready after taking the lock again: keep draining
completed ev
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
net: ethernet: cortina: Fix budget accounting
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Fix budget accounting
The gmac_rx() function returns the remaining NAPI budget, but its
caller treats the return value as the number of packets received. An
idle poll therefore reports a full budget and remains scheduled.
Return the number of received packets instead. Preserve the existing
free queue refill accounting by adding that count directly; continuing
to subtract it from the budget would invert the refill behavior.
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
net: ethernet: cortina: Count dropped frames as NAPI work
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Count dropped frames as NAPI work
The RX loop only consumes budget when it successfully delivers a frame.
Error paths keep consuming descriptors without reducing the budget, so a
stream of bad frames can process the entire receive ring in one poll.
Move the budget accounting to a common end-of-frame path. This counts
each completed frame as NAPI work whether it was delivered or dropped,
matching the behavior of the vendor driver.
Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del()
A NULL pointer dereference in klist_put() occurs when a child device (such
as a BNEP network device in bnep_session) is concurrently being
unregistered while hci_conn_del_sysfs() reparents child devices.
This is caused by a race condition between hci_conn_del_sysfs() and
concurrent child device unregistration (e.g. bnep_session calling
unregister_netdev()). During device unregistration, device_del() snapshots
a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the
child device using device_f
In the Linux kernel, the following vulnerability has been resolved:
vxlan: initialize _md in vxlan_xmit_one()
If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and
VXLAN_F_GBP, and a packet is transmitted through it using an external
ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left
pointing to the uninitialized _md stack variable:
if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) {
if (info->options_len < sizeof(*md))
goto drop;
md = ip_tunnel_info_opts(info);
}
Because IP_TUNNEL_
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
net/sched: cls_route: free emptied bucket on filter move
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_route: free emptied bucket on filter move
route4_change can move an existing filter to a different top-level
bucket: route4_set_parms recomputes the handle from TCA_ROUTE4_TO/
FROM/IIF, and the handle-mismatch check is gated on the 'new' flag, so
for an existing filter the new handle may differ from the old one and
land in a different bucket. When this happens, the filter is unlinked
from the old bucket, but the bucket itself is never freed once it goes
empty. The stale empty bucket remains in head->table[], causing
route4_delete to report *last=false even af
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain().
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain().
If a netlink socket sends RTM_GETCHAIN requests repeatedly
without recv()ing the responses, tc_ctl_chain() hogs CPU and
triggers Hung Task splat. [0]
As caught in the stack trace, netlink_attachskb() could confuse
tc_ctl_chain() by returning -EAGAIN when the userspace netlink
socket's receive buffer is full.
The replay: label exists since commit 32a4f5ecd738 ("net: sched:
introduce chain object to uapi") but was not used initially.
Since commit 9f407f1768d3 ("net: sched: introduce chain templates"),
the lab
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
net/rds: fix tcp stream corruption with large pages
In the Linux kernel, the following vulnerability has been resolved:
net/rds: fix tcp stream corruption with large pages
rds_message_map_pages() assigns PAGE_SIZE bytes to every
scatterlist entry, even when total_len ends in a partial page. The RDS
congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE
greater than 8192 the scatterlist maps bytes beyond the end of the
congestion map. RDS-TCP transmits the SG contents according to those
lengths, so the extra bytes become part of the TCP RDS stream and are
interpreted as subsequent RDS message headers, corrupting the stream.
Limit the final scatterlist mapping to the number of
net: stmmac: fix TX descriptor availability check for TSO traffic
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix TX descriptor availability check for TSO traffic
stmmac_tso_xmit() estimates the number of free TX descriptors required by
a TSO skb as:
(skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1
which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This
underestimates the descriptors actually consumed by stmmac_tso_allocator(),
since each fragment is mapped individually and so it needs at least one
descriptor regardless of its size. Moreover, one descriptor is used for
the L2/L3/L4 headers and, when the MSS changes, one more is consumed for
the MSS
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands
When a LUN_RESET aborts a WRITE command that is in the
TRANSPORT_WRITE_PENDING state, the target core sets CMD_T_ABORTED and
waits for the frontend to finish processing.
If the initiator subsequently sends the remaining dataout PDUs,
__iscsit_check_dataout_hdr() catches the payload, stops the dataout
timer if the sequence is final and finally dumps the data. However, the
iSCSI target doesn't trigger the completion process for these aborted
commands. Because of this, the abort path hangs indefinitely in
targe
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
configfs: pin the symlink target's dirent instead of chasing ->ci_dentry
In the Linux kernel, the following vulnerability has been resolved:
configfs: pin the symlink target's dirent instead of chasing ->ci_dentry
create_link() reads the target's configfs_dirent from
item->ci_dentry->d_fsdata, relying on the item reference taken by
get_target(). That reference pins the item, not its dentry: the dentry is
pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via
simple_rmdir() while the item is still alive. A symlink racing with rmdir
of its target can therefore find ->ci_dentry freed and its dirent
released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get().
Take the dirent in get_t
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
configfs: unhash the dentry before dropping the item in rmdir
In the Linux kernel, the following vulnerability has been resolved:
configfs: unhash the dentry before dropping the item in rmdir
configfs_get_config_item() treats a hashed dentry as proof that
sd->s_element is a live config_item. configfs_rmdir() breaks that:
simple_rmdir() leaves the dentry hashed, the last reference to the item is
dropped right after, and the dentry is only unhashed by d_delete() once
->rmdir() has returned. configfs_symlink() resolves its target holding no
lock on it, so get_target() can land in that window:
BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90
get_target fs/configfs/symlink.c:128 [inline
In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix fib6 walker UAF on seq stop
ipv6_route_iter_active() treats a walker in FWS_U at the table root as
already unlinked. fib6_del_route() can move a still-linked walker into
that same state when the current leaf is the last route at the root,
so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq
private object can then be freed while it remains on
net->ipv6.fib6_walkers. A later route deletion walks the dangling list
and uses the freed walker.
Use the list head as membership state and reinitialize it when
unlinking. Keep the existing w->node check so a
In the Linux kernel, the following vulnerability has been resolved:
ipmr: account multicast table and route memory
A netadmin in a user+net namespace can create many IPv4 and IPv6
multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen
id allocates an mr_table via the shared mr_table_alloc(), links it
into the per-net list, and leaves it until netns teardown. Those
objects were not charged to memcg, so the host unreclaimable slab
grows with the table count.
Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the
IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established
handling of IP addresses, routes and altern
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
reboot: fix cad_pid use-after-free race
In the Linux kernel, the following vulnerability has been resolved:
reboot: fix cad_pid use-after-free race
cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid()
reads it and passes it to pid_vnr() without protecting the lifetime of
the referenced struct pid. A concurrent writer can replace cad_pid and
drop the final reference to the old struct pid after the reader has
loaded the pointer but before pid_vnr() has finished dereferencing it,
causing a use-after-free.
kill_cad_pid() has the same lifetime race when it passes cad_pid to
kill_pid().
At the time this issue was reported, an unprivileged user could reach the
sysctl
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
tracing: Set the trace clock before registering the histogram trigger
In the Linux kernel, the following vulnerability has been resolved:
tracing: Set the trace clock before registering the histogram trigger
hist_register_trigger() puts the trigger on the global named_triggers
list in cmd_ops->init(), and only then sets the trace clock:
if (data->cmd_ops->init) {
ret = data->cmd_ops->init(data);
if (ret < 0)
goto out;
}
if (hist_data->enable_timestamps) {
ret = tracing_set_clock(file->tr, hist_data->attrs->clock);
if (ret) {
hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock));
goto out;
}
The clock string is not checked anywhere before that call, so a named
trigger using common_times
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
tracing: Take trace_array reference when opening a tracer options file
In the Linux kernel, the following vulnerability has been resolved:
tracing: Take trace_array reference when opening a tracer options file
When a tracer option file is opened, it is passed a descriptor that points
to an element on the trace_array's topts array. This element has
information to find the trace array and other information. It uses this
element to take a reference of the trace_array so that the trace_array
does not get removed while this file is opened.
Unfortunately, there's a race condition where the element itself could be
freed by the removal of the instance the trace_array represents causing a
use-after-free as this elemen