PatchFirst · Aktuelle Sicherheitslücken
In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux-aws-fips: 384. Davon im KEV-Katalog: 0.
Sicherheitslücken: 6962
In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix fault in unaligned fixup Use kzalloc_obj() / kzalloc_objs() to allocate the memcard structs, instead of kmalloc_obj() / kmalloc_objs() to prevent access to uninitialized data. Fixes runtime error: Fault in unaligned fixup: 0000 [#1] at mtd_get_fact_prot_info.
In the Linux kernel, the following vulnerability has been resolved: net/9p: fix infinite loop in p9_client_rpc on fatal signal When p9_client_rpc() is called with type P9_TFLUSH and the transport has no peer (e.g. fd transport backed by pipes with no 9p server), a fatal signal causes an infinite loop: again: err = io_wait_event_killable(req->wq, ...) /* SIGKILL wakes the task, returns -ERESTARTSYS */ if (err == -ERESTARTSYS && c->status == Connected && type == P9_TFLUSH) { sigpending = 1; clear_thread_flag(TIF_SIGPENDING); goto again; } clear_thread_flag() clears TIF_SIGPENDING before jumping back to io_wait_event_killable(
In the Linux kernel, the following vulnerability has been resolved: ocfs2: avoid moving extents to occupied clusters For non-auto OCFS2_IOC_MOVE_EXT operations, userspace supplies a physical me_goal. ocfs2_move_extent() initializes new_phys_cpos from that goal and expects ocfs2_probe_alloc_group() to replace it with a free run in the target block group. The probe currently leaves *phys_cpos unchanged if the scan reaches the end of the group without finding a free run. An occupied goal at the last bit can therefore survive the probe and be passed to __ocfs2_move_extent(), which copies file data into a cluster still owned by another inode
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec [BUG] On-disk corruption setting l_next_free_rec to 0 in an inode's embedded extent list triggers a UBSAN panic on the next write to that file. [CAUSE] ocfs2_sum_rightmost_rec() computes i = le16_to_cpu(el->l_next_free_rec) - 1 and accesses el->l_recs[i] without validating i. When l_next_free_rec is 0, i becomes -1; when l_next_free_rec exceeds l_count, i falls past the end of the array. Either case violates the __counted_by_le(l_count) annotation on l_recs[] and triggers UBSAN. [FIX] Validate the inode
In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject dinodes with non-canonical i_mode type Patch series "ocfs2: harden inode validators against forged metadata", v2. This series adds three structural checks to OCFS2 dinode validation so malformed on-disk fields are rejected before ocfs2_populate_inode() copies them into the in-core inode. The checks cover: - i_mode values whose type bits do not name a canonical POSIX file type; - non-device dinodes whose id1.dev1.i_rdev field is non-zero; and - non-inline dinodes that claim non-zero i_size while i_clusters is zero, covering directories uncondit
In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject non-inline dinodes with i_size and zero i_clusters On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a non-inline regular file with non-zero i_size and zero i_clusters is structurally malformed: the extent map declares no allocated clusters yet the size header claims content exists. Keep rejecting that shape, but express it through a shared predicate so the same invariant is available to normal inode reads and online filecheck. The same zero-cluster shape is also malformed for non-inline directories. ocfs2 directory growth allocates backing s
In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Fix frags[] overflow by bounding frame_count tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The first frame goes into the skb linear area and every further frame is added as a page fragment. skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, hdr_size, frame_size, TBNET_RX_PAGE_SIZE - hdr_size); A packet of frame_count frames therefore ends up with frame_count - 1 fragments. tbnet_check_frame() only bounds the peer supplied frame_count to TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A peer
In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: swp: Improve locking user experience In the case of the first block being locked (or the few first blocks), if the user want to fully unlock the device it has two possibilities: - either it asks to unlock the entire device, and this works; - or it asks to unlock just the block(s) that are currently locked, which fails. It fails because the conditions "can_be_top" and "can_be_bottom" are true. Indeed, in this case, we unlock everything, so the TB bit does not matter. However in the current implementation, use_top would be true (as this is the favourite optio
In the Linux kernel, the following vulnerability has been resolved: irqchip/crossbar: Use correct index in crossbar_domain_free() crossbar_domain_free() resets the domain data and then uses the nulled out irq_data->hwirq member as index to reset the irq_map[] entry and to write the relevant crossbar register with a safe entry. That means it never frees the correct index and keeps the crossbar register connection to the source interrupt active. If it would not reset the domain data, then this would be even worse as irq_data->hwirq holds the source interrupt number, but both the map and register index need the corresponding GIC SPI number an
In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializes several resources after dell_setup_rfkill(), including the optional touchpad LED, keyboard backlight LED, battery hook, debugfs directory and dell-laptop notifier. If a later LED or backlight registration fails, the error path only tears down the battery hook and rfkill resources. This leaves the notifier, debugfs directory, keyboard backlight LED and optional touchpad LED registered after dell_init() returns an error. Add the missing cleanup calls before tearing down rfkill.
In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (atomic) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic (polling) path rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle for this i2c controller. Reading I2DR to obtain the count likewise arms the next byte on the count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly and left the bus held. Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->
In the Linux kernel, the following vulnerability has been resolved: xen/gntdev: fix error handling in ioctl When gntdev_ioctl_map_grant_ref() fails to copy the operation result back to userspace after successfully adding the mapping to the list, the error path returns -EFAULT without releasing the reference acquired by gntdev_alloc_map(). The mapping remains in priv->maps with a refcount of 1, causing a memory leak and a dangling list entry. Additionally, gntdev_add_map() may modify map->index to avoid overlap with existing mappings. Therefore, the index returned to userspace must be obtained after gntdev_add_map() completes. Fix this by
In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silent
In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix CAN frame rx/tx statistics KCSAN detected a data race within the bcm_rx_handler() when two CAN frames have been simultaneously received and processed in a single rx op by two different CPUs. Use atomic operations with (signed) long data types to access the statistics in the hot path to fix the KCSAN complaint. Additionally simplify the update and check of statistics overflow by using the atomic operations in separate bcm_update_[rx|tx]_stats() functions. The rx variant runs under bcm_rx_update_lock to prevent races when resetting the two rx counters; the tx
In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler() For an rx op subscribed on all interfaces (ifindex == 0), the same op is registered once in the shared per-netns wildcard filter list, so bcm_rx_handler() can run concurrently on different CPUs for frames arriving on different net devices. op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was taken, allowing concurrent writers to race each other - including a torn store of the 64-bit rx_stamp on 32-bit platforms. Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex
In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic tra
In the Linux kernel, the following vulnerability has been resolved: can: bcm: track a single source interface for ANYDEV timeout/throttle ops An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or throttle timer has no defined semantics when matching frames arrive from several interfaces: bcm_rx_handler() can run concurrently for the same op on different CPUs, racing hrtimer_cancel()/ bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing spurious RX_TIMEOUT notifications and last_frames corruption. The same concurrency lets throttled multiplex frames from different interfaces clobber the single rx_ifindex/rx_stamp fields
In the Linux kernel, the following vulnerability has been resolved: can: bcm: validate frame length in bcm_rx_setup() for RTR replies bcm_tx_setup() validates cf->len against the CAN/CAN FD DLC limits before installing frames for TX_SETUP, but bcm_rx_setup() never did the same for the RTR-reply frame configured via RX_SETUP with RX_RTR_FRAME.
In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from
In the Linux kernel, the following vulnerability has been resolved: dm thin metadata: fix metadata snapshot consistency on commit failure __reserve_metadata_snap() and __release_metadata_snap() modify the superblock's held_root directly in the block_manager's buffer. If the subsequent metadata commit fails, the held_root gets flushed to disk through the abort_transaction path, resulting in inconsistent metadata. Reproducer 1: __reserve_metadata_snap() 1. Create a 2 MiB metadata device and make the region after the 14th block inaccessible, to trigger metadata commit failure in the subsequent reserve_metadata_snap operation. The 14th
Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.