pmdomain: bcm: bcm2835-power: Increase ASB control timeout
In the Linux kernel, the following vulnerability has been resolved:
pmdomain: bcm: bcm2835-power: Increase ASB control timeout
The bcm2835_asb_control() function uses a tight polling loop to wait
for the ASB bridge to acknowledge a request. During intensive workloads,
this handshake intermittently fails for V3D's master ASB on BCM2711,
resulting in "Failed to disable ASB master for v3d" errors during
runtime PM suspend. As a consequence, the failed power-off leaves V3D in
a broken state, leading to bus faults or system hangs on later accesses.
As the timeout is insufficient in some scenarios, increase the polling
timeout from 1us to 5us, w
wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down
When the nl80211 socket that originated a PMSR request is
closed, cfg80211_release_pmsr() sets the request's nl_portid
to zero and schedules pmsr_free_wk to process the abort
asynchronously. If the interface is concurrently torn down
before that work runs, cfg80211_pmsr_wdev_down() calls
cfg80211_pmsr_process_abort() directly. However, the already-
scheduled pmsr_free_wk work item remains pending and may run
after the interface has been removed from the driver. This
could cause the driver's abort_pmsr callback t
net: bonding: fix NULL deref in bond_debug_rlb_hash_show
In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix NULL deref in bond_debug_rlb_hash_show
rlb_clear_slave intentionally keeps RLB hash-table entries on
the rx_hashtbl_used_head list with slave set to NULL when no
replacement slave is available. However, bond_debug_rlb_hash_show
visites client_info->slave without checking if it's NULL.
Other used-list iterators in bond_alb.c already handle this NULL-slave
state safely:
- rlb_update_client returns early on !client_info->slave
- rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance
compare slave values before visiting
- lb_req_update_subnet_clien
In the Linux kernel, the following vulnerability has been resolved:
NFC: nxp-nci: allow GPIOs to sleep
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 --
drm/i915/gt: Check set_default_submission() before deferencing
In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Check set_default_submission() before deferencing
When the i915 driver firmware binaries are not present, the
set_default_submission pointer is not set. This pointer is
dereferenced during suspend anyways.
Add a check to make sure it is set before dereferencing.
[ 23.289926] PM: suspend entry (deep)
[ 23.293558] Filesystems sync: 0.000 seconds
[ 23.298010] Freezing user space processes
[ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds)
[ 23.309766] OOM killer disabled.
[ 23.313027] Freezing remaining freezable tasks
[ 2
can: raw: fix ro->uniq use-after-free in raw_rcv()
In the Linux kernel, the following vulnerability has been resolved:
can: raw: fix ro->uniq use-after-free in raw_rcv()
raw_release() unregisters raw CAN receive filters via can_rx_unregister(),
but receiver deletion is deferred with call_rcu(). This leaves a window
where raw_rcv() may still be running in an RCU read-side critical section
after raw_release() frees ro->uniq, leading to a use-after-free of the
percpu uniq storage.
Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific
socket destructor. can_rx_unregister() takes an extra reference to the
socket and only drops it from the RCU callback, so freeing uniq from
sk_
ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop()
In the Linux kernel, the following vulnerability has been resolved:
ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop()
When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently
allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for
single nexthops and small Equal-Cost Multi-Path groups, this fixed
allocation fails for large nexthop groups like 512 nexthops.
This results in the following warning splat:
WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608
[...]
RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395)
[...]
Call Trace:
<TASK>
rtnetlink_rcv_msg (net/core/
driver core: platform: use generic driver_override infrastructure
In the Linux kernel, the following vulnerability has been resolved:
driver core: platform: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
HID: asus: avoid memory leak in asus_report_fixup()
In the Linux kernel, the following vulnerability has been resolved:
HID: asus: avoid memory leak in asus_report_fixup()
The asus_report_fixup() function was returning a newly allocated
kmemdup()-allocated buffer, but never freeing it. Switch to
devm_kzalloc() to ensure the memory is managed and freed automatically
when the device is removed.
The caller of report_fixup() does not take ownership of the returned
pointer, but it is permitted to return a pointer whose lifetime is at
least that of the input buffer.
Also fix a harmless out-of-bounds read by copying only the original
descriptor size.
In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: ensure we're polling a polled queue
A user can change the polled queue count at run time. There's a brief
window during a reset where a hipri task may try to poll that queue
before the block layer has updated the queue maps, which would race with
the now interrupt driven queue and may cause double completions.
module: Fix kernel panic when a symbol st_shndx is out of bounds
In the Linux kernel, the following vulnerability has been resolved:
module: Fix kernel panic when a symbol st_shndx is out of bounds
The module loader doesn't check for bounds of the ELF section index in
simplify_symbols():
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
[...]
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
/** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_v
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
In the Linux kernel, the following vulnerability has been resolved:
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
We have recently observed a number of subvolumes with broken dentries.
ls-ing the parent dir looks like:
drwxrwxrwt 1 root root 16 Jan 23 16:49 .
drwxr-xr-x 1 root root 24 Jan 23 16:48 ..
d????????? ? ? ? ? ? broken_subvol
and similarly stat-ing the file fails.
In this state, deleting the subvol fails with ENOENT, but attempting to
create a new file or subvol over it errors out with EEXIST and even
aborts the fs. Which leaves us a bit stuck.
dmesg contains a single notable error message reading:
xfrm: prevent policy_hthresh.work from racing with netns teardown
In the Linux kernel, the following vulnerability has been resolved:
xfrm: prevent policy_hthresh.work from racing with netns teardown
A XFRM_MSG_NEWSPDINFO request can queue the per-net work item
policy_hthresh.work onto the system workqueue.
The queued callback, xfrm_hash_rebuild(), retrieves the enclosing
struct net via container_of(). If the net namespace is torn down
before that work runs, the associated struct net may already have
been freed, and xfrm_hash_rebuild() may then dereference stale memory.
xfrm_policy_fini() already flushes policy_hash_work during teardown,
but it does not synchronize policy_hthresh.work.
Synchronize poli
In the Linux kernel, the following vulnerability has been resolved:
af_key: validate families in pfkey_send_migrate()
syzbot was able to trigger a crash in skb_put() [1]
Issue is that pfkey_send_migrate() does not check old/new families,
and that set_ipsecrequest() @family argument was truncated,
thus possibly overfilling the skb.
Validate families early, do not wait set_ipsecrequest().
[1]
skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev:<NULL>
kernel BUG at net/core/skbuff.c:214 !
Call Trace:
<TASK>
skb_over_panic net/core/skbuff.c:219 [inline]
skb_
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path.
Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb
Before using sk pointer, check if it is null.
Fix the following:
KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267]
CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025
Workqueue: events l2cap_info_timeout
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00
nfc: nci: fix circular locking dependency in nci_close_device
In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and
net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer
In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer
smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores
the pointer in pipe_buffer.private. The pipe_buf_operations for these
buffers used .get = generic_pipe_buf_get, which only increments the page
reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv
pointer itself was not handled, so after tee() both the original and the
cloned pipe_buffer share the same smc_spd_priv *.
When both pipes are subsequently released, smc_rx_pipe_buf_release() is
called twice aga
net: fix fanout UAF in packet_release() via NETDEV_UP race
In the Linux kernel, the following vulnerability has been resolved:
net: fix fanout UAF in packet_release() via NETDEV_UP race
`packet_release()` has a race window where `NETDEV_UP` can re-register a
socket into a fanout group's `arr[]` array. The re-registration is not
cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout
array.
`packet_release()` does NOT zero `po->num` in its `bind_lock` section.
After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex`
still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)`
that already found the socket in `sklist` can re-register the hook.
For fan
udp: Fix wildcard bind conflict check when using hash2
In the Linux kernel, the following vulnerability has been resolved:
udp: Fix wildcard bind conflict check when using hash2
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888