inet: frags: strip GSO state from fragments before reassembly
In the Linux kernel, the following vulnerability has been resolved:
inet: frags: strip GSO state from fragments before reassembly
A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark
an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off.
inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first
fragment's skb as the head of the reassembled datagram, including its
shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments
on frag_list with whatever linear/paged layout they arrived with.
After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the
reassembled skb therefore still claims
In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid combining some incoming suboptions
Some MPTCP suboptions are mutually exclusive according to the RFC8684,
but also because in different places, the code doesn't expect some
combinations to be present. That's specially true for suboptions that
would be present twice, but with different attributes.
The new restrictions are the same as the ones applied on the output
side, with mptcp_write_options. The same rules can be reused with a
small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks
this option [1], which is not the case on Linux. Here are th
mptcp: options: reset DSS fields in case of unexpected size
In the Linux kernel, the following vulnerability has been resolved:
mptcp: options: reset DSS fields in case of unexpected size
A remote peer could send a malformed DSS with a wrong size, followed by
another DSS or MPC + Data. In this case, the first suboption will be
ignored, but leaving some fields written, which could lead to
inconsistency or access uninitialized data.
Explicitly reset the fields that could have been modified in case of
unexpected size.
s390/qeth: validate user buffer length in SNMP and ARP query ioctls
In the Linux kernel, the following vulnerability has been resolved:
s390/qeth: validate user buffer length in SNMP and ARP query ioctls
qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by
a user-supplied length (udata_len) without checking a lower bound, then
set udata_offset to a fixed non-zero value and pass both to a reply
callback. The callback bounds-checks the copy with
if ((udata_len - udata_offset) < len)
Both fields are u32, so a udata_len smaller than udata_offset makes the
subtraction wrap and the check pass, and the following memcpy() writes
past the allocation. A udata_len of 0 also yields ZERO_SIZE
In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: lpass-tx-macro: Fix enum kcontrol accesses
The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but
tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their
value through ucontrol->value.integer.value[0] (a long) instead of
ucontrol->value.enumerated.item[0] (an unsigned int).
This same pattern was fixed in the sibling drivers by
commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array
out of bounds for enum type") and
commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array
out of bounds for enum type"), but tx-macro was missed.
fbdev: bound mode sysfs output to the sysfs buffer
In the Linux kernel, the following vulnerability has been resolved:
fbdev: bound mode sysfs output to the sysfs buffer
mode_string() uses snprintf() which can return a value larger than the
remaining buffer space. show_modes() accumulates the return value into i
without checking whether i has reached PAGE_SIZE, causing the offset to
advance past the sysfs buffer if the modelist is long enough.
Add a size parameter to mode_string() and use scnprintf() to return
only the bytes actually written. Add an early return when offset
already exceeds the buffer. In show_modes(), stop accumulating once
the buffer is full.
fbdev: clear fb_info->mode before deleting a videomode
In the Linux kernel, the following vulnerability has been resolved:
fbdev: clear fb_info->mode before deleting a videomode
fb_set_var() can delete a mode from info->modelist when userspace
passes FB_ACTIVATE_INV_MODE through FBIOPUT_VSCREENINFO. The code
checks that the mode being deleted is not the current info->var and
that fbcon is not using it, but it does not check fb_info->mode.
fb_info->mode may still point into the modelist entry being deleted.
If the entry is freed, later mode sysfs reads through show_mode() can
dereference a stale pointer.
Clear fb_info->mode before calling fb_delete_videomode() when it
matches the mode being re
drm/amdgpu: reject oversized IBs with per-ring packet limits
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: reject oversized IBs with per-ring packet limits
On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through
to ib->length_dw without a limit, while ring_emit_ib() encodes length
into packet fields. Oversized values can corrupt adjacent control bits
and destabilize command submission.
Add a per-ring IB packet size limit helper and reject command
submissions exceeding the corresponding dword limit before IB
allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE,
and apply the MM fallback limit for other ring types.
(cherry picked from co
Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet
In the Linux kernel, the following vulnerability has been resolved:
Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet
Make finger2 (and also finger1) unsigned, so that if the finger index in
the packet is 0 then subtracting 1 creates an array index which overflows
above the existing check for FOC_MAX_FINGERS, as the existing comment says
it should, instead of writing to state->fingers[-1].
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
Input: iforce - validate input packet lengths
In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - validate input packet lengths
iforce_process_packet() reads fixed fields from joystick, wheel and
status packets without first checking their lengths. In particular, the
shared hats-and-buttons helper unconditionally reads data[6]. The status
tail is a sequence of 16-bit effect addresses, but an incomplete final
address is also consumed. A successful zero-length USB URB additionally
reads the packet ID before the common parser is called.
Reject the zero-length USB transfer, require the seven-byte joystick and
wheel prefixes and the two-byte status prefix, a
Input: byd - synchronize timer deletion before freeing private data
In the Linux kernel, the following vulnerability has been resolved:
Input: byd - synchronize timer deletion before freeing private data
byd_disconnect() uses timer_delete() before freeing the driver's private
data. This does not wait for a running byd_clear_touch() callback, which
dereferences the private data and its psmouse pointer. A callback racing
with disconnect can therefore access the private data after it has been
freed. The timer can also still be re-armed by byd_process_byte() while
the disconnect is in progress.
Use timer_shutdown_sync() before freeing the private data: it waits for
a running callback and turns any later re-
Input: synaptics-rmi4 - zero report size on F54 work error
In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - zero report size on F54 work error
In rmi_f54_work(), if an error occurs during report request or command
verification, the code jumped directly to the 'error' label, bypassing
the 'abort' label where f54->report_size was normally zeroed out.
This left f54->report_size containing its previous successful payload
size. If a user then altered the V4L2 format to a smaller size, and a
subsequent run failed, rmi_f54_buffer_queue() would copy the stale,
larger payload size into the shrunken V4L2 buffer, causing a heap
buffer overflow.
Fix this by merging
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
Input: synaptics-rmi4 - block s_input when F54 queue is busy
In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - block s_input when F54 queue is busy
Changing the input (diagnostic report type) mid-stream changes the
report size. Since V4L2 buffers are allocated based on the size at
stream start, changing the input while streaming could lead to a
heap buffer overflow if the new size is larger than the allocated
buffers.
Prevent this by blocking VIDIOC_S_INPUT with -EBUSY if the V4L2 queue
is busy (streaming).
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue
In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue
Previously, rmi_f54_buffer_queue() waited for the worker thread to
finish but ignored whether it succeeded. If the worker failed (e.g.,
due to a timeout or register read failure), the queue thread would
silently return success, delivering stale or uninitialized memory to
userspace.
Add a 'report_error' field to struct f54_data to store the worker's exit
status. Check this field in rmi_f54_buffer_queue() after the worker
finishes, and mark the buffer as VB2_BUF_STATE_ERROR if an error
occurred.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
gpio: ml-ioh: use raw_spinlock_t for the register lock
In the Linux kernel, the following vulnerability has been resolved:
gpio: ml-ioh: use raw_spinlock_t for the register lock
ioh_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
ioh_irq_enable() and ioh_irq_disable() take the same lock from the
.irq_enable/.irq_disable callb
libceph: fix multiple unsafe decodes in decode_locker()
In the Linux kernel, the following vulnerability has been resolved:
libceph: fix multiple unsafe decodes in decode_locker()
decode_locker() in cls_lock_client.c contains three unsafe decode
operations that allow a malicious or compromised OSD to trigger
slab-out-of-bounds reads:
1. ceph_decode_copy() at the locker_id_t name field has no preceding
bounds check. With p == end after ceph_start_decoding() accepts
struct_len=0, this reads sizeof(ceph_entity_name) = 9 bytes past
the validated buffer boundary.
2. *p += sizeof(struct ceph_timespec) after the locker_info_t header
is an unchecked pointer advance. A malicious OSD can pos
openrisc: signal: do not restore privileged SR bits on sigreturn
In the Linux kernel, the following vulnerability has been resolved:
openrisc: signal: do not restore privileged SR bits on sigreturn
restore_sigcontext() copies the whole supervision register (SR) from the
signal frame and only clears SPR_SR_SM before the value is reloaded into
the hardware SR (through ESR and l.rfe) on the return to user space. All
other SR bits are left under user control.
An unprivileged task can thus return from a signal handler through a
crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the
CPU performs no translation or protection on data accesses, so the task
gains read and write access to arbitr
In the Linux kernel, the following vulnerability has been resolved:
Input: sur40 - fix input device registration ordering
In sur40_probe(), input_register_device() was previously called early before
the V4L2 video device and vb2_queue components were fully initialized. If
userspace opened the input device immediately upon registration, sur40_open()
would trigger and start the sur40_poll() worker thread. This worker thread
invokes sur40_process_video() and accesses the uninitialized vb2_queue
structure, leading to a data race and potential system crash.
Furthermore, if V4L2 or video registration failed after input_register_device()
succeede
libceph: Avoid using invalid osd indices from primary_temp
In the Linux kernel, the following vulnerability has been resolved:
libceph: Avoid using invalid osd indices from primary_temp
A corrupted osdmap received from a Ceph monitor or OSD may contain osd
indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts
that don't exist, i.e., that are greater than max_osd or smaller than
CEPH_HOMELESS_OSD (-1). These indices are used to create the up and
acting set in ceph_pg_to_up_acting_osds(), called from calc_target().
While most of these osd indices are checked, the one from primary_temp
is not. Subsequently, this may lead to calc_target() returning this
(potentially invalid) index as