Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
net: stmmac: initialize ptp_lock at probe time
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: initialize ptp_lock at probe time
priv->ptp_lock is only initialized in stmmac_ptp_register(), which runs
during __stmmac_open(). However, the lock is also used while the
interface is down and has never been opened: tc_taprio_configure()
invokes the PTP gettime64() callback to compute the EST base time when
offloading a TAPRIO schedule, and stmmac_get_time() takes
priv->ptp_lock. Using an uninitialized rwlock is undefined behaviour.
Move the rwlock_init() to __stmmac_dvr_probe(), together with the other
private locks, so that ptp_lock is always valid regardless
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
net/sched: cls_route: free emptied bucket on filter move
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_route: free emptied bucket on filter move
route4_change can move an existing filter to a different top-level
bucket: route4_set_parms recomputes the handle from TCA_ROUTE4_TO/
FROM/IIF, and the handle-mismatch check is gated on the 'new' flag, so
for an existing filter the new handle may differ from the old one and
land in a different bucket. When this happens, the filter is unlinked
from the old bucket, but the bucket itself is never freed once it goes
empty. The stale empty bucket remains in head->table[], causing
route4_delete to report *last=false even af
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain().
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain().
If a netlink socket sends RTM_GETCHAIN requests repeatedly
without recv()ing the responses, tc_ctl_chain() hogs CPU and
triggers Hung Task splat. [0]
As caught in the stack trace, netlink_attachskb() could confuse
tc_ctl_chain() by returning -EAGAIN when the userspace netlink
socket's receive buffer is full.
The replay: label exists since commit 32a4f5ecd738 ("net: sched:
introduce chain object to uapi") but was not used initially.
Since commit 9f407f1768d3 ("net: sched: introduce chain templates"),
the lab
In the Linux kernel, the following vulnerability has been resolved:
net: hinic: fix mailbox segment buffer overflow
check_mbox_seq_id_and_seg_len() validates that seq_id does not
exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed
MBOX_SEG_LEN (48). However, this allows the last segment
(seq_id=42) to carry a full 48-byte payload, writing to offset
42*48=2016 for 48 bytes (ending at byte 2064). The receive
buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a
16-byte heap buffer overflow.
The hinic3 driver already handles this correctly by defining
MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it
exceeds the remainin
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
net/rds: fix tcp stream corruption with large pages
In the Linux kernel, the following vulnerability has been resolved:
net/rds: fix tcp stream corruption with large pages
rds_message_map_pages() assigns PAGE_SIZE bytes to every
scatterlist entry, even when total_len ends in a partial page. The RDS
congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE
greater than 8192 the scatterlist maps bytes beyond the end of the
congestion map. RDS-TCP transmits the SG contents according to those
lengths, so the extra bytes become part of the TCP RDS stream and are
interpreted as subsequent RDS message headers, corrupting the stream.
Limit the final scatterlist mapping to the number of
net: stmmac: fix TX descriptor availability check for TSO traffic
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix TX descriptor availability check for TSO traffic
stmmac_tso_xmit() estimates the number of free TX descriptors required by
a TSO skb as:
(skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1
which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This
underestimates the descriptors actually consumed by stmmac_tso_allocator(),
since each fragment is mapped individually and so it needs at least one
descriptor regardless of its size. Moreover, one descriptor is used for
the L2/L3/L4 headers and, when the MSS changes, one more is consumed for
the MSS
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands
When a LUN_RESET aborts a WRITE command that is in the
TRANSPORT_WRITE_PENDING state, the target core sets CMD_T_ABORTED and
waits for the frontend to finish processing.
If the initiator subsequently sends the remaining dataout PDUs,
__iscsit_check_dataout_hdr() catches the payload, stops the dataout
timer if the sequence is final and finally dumps the data. However, the
iSCSI target doesn't trigger the completion process for these aborted
commands. Because of this, the abort path hangs indefinitely in
targe
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
configfs: pin the symlink target's dirent instead of chasing ->ci_dentry
In the Linux kernel, the following vulnerability has been resolved:
configfs: pin the symlink target's dirent instead of chasing ->ci_dentry
create_link() reads the target's configfs_dirent from
item->ci_dentry->d_fsdata, relying on the item reference taken by
get_target(). That reference pins the item, not its dentry: the dentry is
pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via
simple_rmdir() while the item is still alive. A symlink racing with rmdir
of its target can therefore find ->ci_dentry freed and its dirent
released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get().
Take the dirent in get_t
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
configfs: unhash the dentry before dropping the item in rmdir
In the Linux kernel, the following vulnerability has been resolved:
configfs: unhash the dentry before dropping the item in rmdir
configfs_get_config_item() treats a hashed dentry as proof that
sd->s_element is a live config_item. configfs_rmdir() breaks that:
simple_rmdir() leaves the dentry hashed, the last reference to the item is
dropped right after, and the dentry is only unhashed by d_delete() once
->rmdir() has returned. configfs_symlink() resolves its target holding no
lock on it, so get_target() can land in that window:
BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90
get_target fs/configfs/symlink.c:128 [inline
In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix fib6 walker UAF on seq stop
ipv6_route_iter_active() treats a walker in FWS_U at the table root as
already unlinked. fib6_del_route() can move a still-linked walker into
that same state when the current leaf is the last route at the root,
so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq
private object can then be freed while it remains on
net->ipv6.fib6_walkers. A later route deletion walks the dangling list
and uses the freed walker.
Use the list head as membership state and reinitialize it when
unlinking. Keep the existing w->node check so a
In the Linux kernel, the following vulnerability has been resolved:
ipmr: account multicast table and route memory
A netadmin in a user+net namespace can create many IPv4 and IPv6
multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen
id allocates an mr_table via the shared mr_table_alloc(), links it
into the per-net list, and leaves it until netns teardown. Those
objects were not charged to memcg, so the host unreclaimable slab
grows with the table count.
Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the
IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established
handling of IP addresses, routes and altern
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
reboot: fix cad_pid use-after-free race
In the Linux kernel, the following vulnerability has been resolved:
reboot: fix cad_pid use-after-free race
cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid()
reads it and passes it to pid_vnr() without protecting the lifetime of
the referenced struct pid. A concurrent writer can replace cad_pid and
drop the final reference to the old struct pid after the reader has
loaded the pointer but before pid_vnr() has finished dereferencing it,
causing a use-after-free.
kill_cad_pid() has the same lifetime race when it passes cad_pid to
kill_pid().
At the time this issue was reported, an unprivileged user could reach the
sysctl
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
tracing: Set the trace clock before registering the histogram trigger
In the Linux kernel, the following vulnerability has been resolved:
tracing: Set the trace clock before registering the histogram trigger
hist_register_trigger() puts the trigger on the global named_triggers
list in cmd_ops->init(), and only then sets the trace clock:
if (data->cmd_ops->init) {
ret = data->cmd_ops->init(data);
if (ret < 0)
goto out;
}
if (hist_data->enable_timestamps) {
ret = tracing_set_clock(file->tr, hist_data->attrs->clock);
if (ret) {
hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock));
goto out;
}
The clock string is not checked anywhere before that call, so a named
trigger using common_times
ALSA: us122l: Prevent write upgrades for read mappings
In the Linux kernel, the following vulnerability has been resolved:
ALSA: us122l: Prevent write upgrades for read mappings
The hwdep mmap callback rejects read-buffer mappings that are initially
writable, but leaves VM_MAYWRITE set on mappings created with PROT_READ.
A process that can open the hwdep node O_RDWR can later use mprotect() to
make the mapping writable.
The read allocation begins with struct usb_stream. Its read_size member is
used by the fault handler to decide which pages belong to the read buffer.
The read VMA intentionally remains expandable because pcm_usb_stream uses
mremap() after reading that size. Changing read_size f
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
ALSA: usbusx2y: fix in04_last array size mismatch with in04_buf
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usbusx2y: fix in04_last array size mismatch with in04_buf
The in04_last array in struct usx2ydev is declared as char[24], but
in04_buf is allocated as sizeof(struct us428_ctls) which is 21 bytes.
In i_usx2y_in04_int(), when ctl_snapshot_last == -2 (initialization
path):
memcpy(usx2y->in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last));
This copies 24 bytes from a 21-byte slab allocation, reading 3 bytes
past the end of the source object.
Introduce a USX2Y_IN04_SIZE constant defined as sizeof(struct
us428_ctls) and use it consistently for the in04_last array,
ALSA: usbusx2y: validate URB actual_length in interrupt callback
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usbusx2y: validate URB actual_length in interrupt callback
i_usx2y_in04_int() processes the interrupt URB data without checking
urb->actual_length. A short transfer from a malfunctioning device
would cause the handler to process uninitialized heap data from the
kmalloc-allocated in04_buf, which is then copied to the mmap-accessible
ctl_snapshot[] array.
Fix by using kzalloc() for in04_buf to zero-initialize the buffer,
and adding an actual_length check to skip processing on short
transfers while still resubmitting the URB.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
ufs: create the root dentry after loading cylinder metadata
In the Linux kernel, the following vulnerability has been resolved:
ufs: create the root dentry after loading cylinder metadata
ufs_fill_super() installed sb->s_root before it loaded the cylinder
group structures for a writable mount:
sb->s_root = d_make_root(inode);
...
if (!sb_rdonly(sb))
if (!ufs_read_cylinder_structures(sb))
goto failed;
When ufs_read_cylinder_structures() failed, the error path freed the
in-core superblock information and set sb->s_fs_info to NULL while
sb->s_root stayed installed. get_tree_bdev() then reached
deactivate_locked_super(), and because s_root was present,
generic_shutdown_super() called sync_file
ufs: validate cylinder group metadata before caching it
In the Linux kernel, the following vulnerability has been resolved:
ufs: validate cylinder group metadata before caching it
ufs_read_cylinder() copies the cylinder group index and the rotor
positions straight from the on-disk group and caches them without any
check:
ucpi->c_cgx = fs32_to_cpu(sb, ucg->cg_cgx);
ucpi->c_rotor = fs32_to_cpu(sb, ucg->cg_rotor);
ucpi->c_frotor = fs32_to_cpu(sb, ucg->cg_frotor);
ucpi->c_irotor = fs32_to_cpu(sb, ucg->cg_irotor);
They are then used as indices during allocation and free:
- c_cgx indexes the cylinder summary array as
UFS_SB(sb)->fs_cs(ucpi->c_cgx), so a value past s_ncg writes a 32
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
tick/broadcast: Plug clockevents replacement race
In the Linux kernel, the following vulnerability has been resolved:
tick/broadcast: Plug clockevents replacement race
朱恺乾 reported and decoded the following race condition when a broadcast
device is replaced:
CPUA CPUB
__tick_broadcast_oneshot_control()
bc = tick_broadcast_device.evtdev;
tick_install_broadcast_device(dev)
clockevents_exchange_device(cur, dev)
shutdown(cur);
detach(cur);
cur->handler = noop;
tick_broadcast_device.evtdev = dev;
tick_broadcast_set_event(bc, next_event); <- FAIL: arms a detached device.
If the original broadcast device has a restricted interrupt affi
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
tracing: Free histogram the var ref when its initialization fails
In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram the var ref when its initialization fails
create_var_ref() allocates a VAR_REF hist_field and then calls
init_var_ref() to fill it in. When that fails the field is leaked.
commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy
var_refs") made destroy_hist_field() return early for
HIST_FIELD_FL_VAR_REF, since var refs are freed by walking the trigger's
var_refs[] array instead. create_var_ref() adds the field to that array
only after init_var_ref() has succeeded, so on this path the field is in
neither place and nothing frees it.