Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
irqchip/renesas-irqc: Fix generic interrupt chip leak on remove
In the Linux kernel, the following vulnerability has been resolved:
irqchip/renesas-irqc: Fix generic interrupt chip leak on remove
The driver allocates domain generic chips probe. However, on driver
removal, the generic chips are not automatically freed when the interrupt
domain is removed because the domain flags do not include
IRQ_DOMAIN_FLAG_DESTROY_GC.
This causes both the domain generic chips structure and the associated
generic chips to be leaked. Additionally, the generic chips remain on the
global list and may later be accessed by generic interrupt chip suspend,
resume, or shutdown callbacks after the driver has been removed,
pote
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
drm/bridge: tc358767: clamp the reported AUX read size to the request
In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: tc358767: clamp the reported AUX read size to the request
tc_aux_transfer() clamps an AUX read to the payload limit:
size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
After the transfer it replaces size with the byte count the controller
reports in AUX_BYTES:
if (size)
size = FIELD_GET(AUX_BYTES, auxstatus);
AUX_BYTES is GENMASK(15, 8), so it can be up to 255. Nothing clamps it
back to the request. tc_aux_read_data() reads that many bytes into the
16-byte auxrdata stack buffer, then copies them into the caller buffer. A
reported count
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments
Make sure we don't end-up with a num_frags = 0 situation.
For that, check that the required size is not 0 and put a checker on
num_frags as well.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
gpu: host1x: Avoid stack over-read in debug output helpers
In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Avoid stack over-read in debug output helpers
host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which
returns the length the formatted string would have reached with an
unbounded buffer. That return value was passed straight to o->fn as
the number of bytes to emit.
This could cause a read past end of the output buffer if a call to
host1x_debug_* produced a string longer than 256 bytes. This only
affected the debugfs files as the printk debug sink ignores the
number of bytes. In practice, this is very unlikely to occur.
Fix by switching to vscnpr
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
drm/msm: Only fini scheduler after successful init
In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Only fini scheduler after successful init
msm_ringbuffer_new() destroys a partially initialized ring through
msm_ringbuffer_destroy() when an allocation or scheduler setup step
fails.
If drm_sched_init() fails before it finishes initializing the scheduler,
the failure path still calls drm_sched_fini(). That teardown path assumes
the scheduler work items, lists, and workqueue state were initialized.
Track successful scheduler initialization and call drm_sched_fini() only
after drm_sched_init() returned 0.
This issue was found by a static analysis checker and conf
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_uac1_legacy: remove broken string configfs attributes
The UAC1_STR_ATTRIBUTE macro defines configfs show/store handlers for
the fn_play, fn_cap, and fn_cntl string options. The store function
contains an inverted null check on the kstrndup() return value.
This means every write attempt returns -ENOMEM on success and
dereferences a NULL pointer on allocation failure. The attributes
have been broken and unused for many years.
Remove the UAC1_STR_ATTRIBUTE macro and the three attributes it
generated. The internal defaults (FILE_PCM_PLAYBACK, FILE_PCM_CAPTURE,
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
UDF symlink pathComponent header OOB read
In the Linux kernel, the following vulnerability has been resolved:
UDF symlink pathComponent header OOB read
udf_symlink_filler() can enter udf_pc_to_char() with a partial pathComponent header.
Validate that enough input remains for a complete pathComponent header
before accessing it. Reject malformed symlink data that would otherwise
make udf_pc_to_char() perform an out-of-bounds read.
uio: Fix stale info pointer in failed registration path
In the Linux kernel, the following vulnerability has been resolved:
uio: Fix stale info pointer in failed registration path
After device_add(), the UIO device is visible to userspace and /dev/uioX
can be opened. If a later setup step fails, __uio_register_device()
unwinds the device but leaves idev->info pointing at the caller-owned
struct uio_info.
That is unsafe when an opener races with the failed registration path.
The open file keeps a reference to the uio_device, while the caller sees
registration failure and may free its struct uio_info. Later file
operations can then follow idev->info and dereference freed memory.
Handle post-devi
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
speakup: keyhelp: guard letter_offsets possible out-of-range indexing
In the Linux kernel, the following vulnerability has been resolved:
speakup: keyhelp: guard letter_offsets possible out-of-range indexing
help_init() builds letter_offsets[] by using the first byte of each
function name as an index via `(start & 31) - 1`. If function_names are
overridden from sysfs (root) with a name starting outside [a–z], the
index underflows or exceeds the array, leading to OOB write.
Function names can be overridden with the following commands as root:
modprobe speakup_soft
echo "0 _bad" > /sys/accessibility/speakup/i18n/function_names
# then press Insert+2 on /dev/tty
This fix checks the first letter in
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
misc: bcm-vk: Use acquire/release for msgq_inited
In the Linux kernel, the following vulnerability has been resolved:
misc: bcm-vk: Use acquire/release for msgq_inited
bcm_vk_sync_msgq() fills the message queue information and then sets
msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the
message queues and their cached queue information.
atomic_set()/atomic_read() do not order those accesses. A reader can see
msgq_inited set while still seeing stale queue information. Use release
when publishing the initialized queues and acquire when checking the gate.
Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the
gate and does not publish queue state to read
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
misc: ad525x_dpot: use driver core groups for sysfs files
In the Linux kernel, the following vulnerability has been resolved:
misc: ad525x_dpot: use driver core groups for sysfs files
ad_dpot_probe() creates per-RDAC sysfs files manually and then
optionally creates the command sysfs group. This leaves probe responsible
for rolling back partial sysfs state and makes remove responsible for
matching every file that probe created.
Move the device attributes into driver core dev_groups for the I2C and
SPI drivers and use an is_visible() callback to expose only the
attributes supported by the probed device. With this shape, the driver
core creates the sysfs files only after probe succeeds and removes t
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
ipack: ipoctal: fix UAF, null-ptr-deref, and use-after-free in cleanup on remove
In the Linux kernel, the following vulnerability has been resolved:
ipack: ipoctal: fix UAF, null-ptr-deref, and use-after-free in cleanup on remove
Three issues arise when the device is removed while a tty session is
still active:
1. UAF of struct ipoctal: the remove callback frees ipoctal via
kfree() while tty ops may still access it. Fix by introducing
kref-based lifetime management — kref is taken in install() when
a tty is opened and released in cleanup() when the tty is finally
destroyed; remove() uses kref_put() instead of kfree().
2. NULL dereference in ipoctal_write_tty(): __ipoctal_remove()
frees xmit_buf via tty
In the Linux kernel, the following vulnerability has been resolved:
mtd: mtdswap: Avoid freeing registered blktrans device twice
In mtdswap_add_mtd(), debugfs setup failure after successful blktrans
registration can free mbd_dev twice.
add_mtd_blktrans_dev() initializes the blktrans device reference and
publishes the disk. Once that succeeds, del_mtd_blktrans_dev() tears the
disk down and drops the blktrans reference; when that reference reaches
zero, blktrans_dev_release() frees the mtd_blktrans_dev.
The debugfs failure path called del_mtd_blktrans_dev(mbd_dev), then fell
through the common cleanup label and called kfree(mbd_dev) again.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition()
In the Linux kernel, the following vulnerability has been resolved:
mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition()
mtd_add_partition() does not reject the special offset value
MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in
add_mtd_device() when called through the BLKPG ioctl on NAND
devices. The RETAIN value depends on cur_offset being the end of
the previous partition, but in the dynamic partition path
cur_offset equals the offset argument itself, causing undefined
behavior.
Commit 5daa7b21496a ("mtd: prepare partition add and del functions
for ioctl requests") introduced mtd_add_partition() and correctly
rejected MTDPA
drm/v3d: Associate BOs with every job that accesses them
In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Associate BOs with every job that accesses them
A submission can expand into a chain of jobs (e.g. bin + render + cache
clean). Implicit synchronization in v3d_submit_lock_reservations() is gated
on each job's bo[], but the BO list was only ever attached to the last job
of the chain. When that last job is a trailing CACHE_CLEAN job, the job
that actually consumes the BOs (that is, a RENDER or CSD job) was left with
bo_count == 0 and picked up no implicit dependencies. It could therefore
be dispatched to the hardware and read a BO while another context was still
wri
dmaengine: dw-edma: Terminate all descriptors without callbacks
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Terminate all descriptors without callbacks
The DMA Engine client documentation says in the "Terminate APIs" section
of Documentation/driver-api/dmaengine/client.rst:
"No callback functions will be called for any incomplete transfers."
dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches
the interrupt handler. This schedules a callback for the active descriptor
and leaves other issued or submitted descriptors queued. A late callback
after dmaengine_terminate_sync() can dereference client state that has
already been freed, while le
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
dmaengine: dw-edma: Serialize abort state updates
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Serialize abort state updates
dw_edma_abort_interrupt() drops vc.lock before changing request and
status. issue_pending() can acquire the lock in that small window,
observe the old busy state, and skip starting queued descriptors. Then
the abort handler overwrites the channel status as idle, leaving the new
descriptors stranded for good.
Keep descriptor completion and the state transition in the same critical
section.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
dmaengine: dw-edma: Serialize channel state checks
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Serialize channel state checks
pause() and resume() read and update channel state without holding vc.lock,
while the interrupt handlers update the same state under it. Take the same
lock around those state checks so that request, status, and configured stay
consistent.
For example, pause() can observe EDMA_ST_BUSY right before the interrupt
handler completes the final descriptor and moves the channel to
EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No
further interrupt will acknowledge the request, and since issue_pending()
re
ASoC: meson: Keep link pointers valid on realloc failure
In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: Keep link pointers valid on realloc failure
meson_card_reallocate_links() grows the DAI link and private data
arrays with two consecutive krealloc() calls and updates the owner
pointers only after both calls have succeeded.
A successful krealloc() may move the data: it frees the old block and
returns a new one. When that happens for the link array and the second
krealloc() then fails, card->dai_link still points to the block that
krealloc() already freed, and the error path frees the new block too.
The probe error path then calls meson_card_clean_references(),
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Propagate sdma_txinit_ahg() errors
set_txreq_header_ahg() ignores the return value of sdma_txinit_ahg().
If sdma_txinit_ahg() fails, it returns before initializing tx->txreq.
However, set_txreq_header_ahg() ignores the error and returns the AHG
change count, causing the caller to continue processing the request as
though initialization had succeeded.
Propagate sdma_txinit_ahg() failures to the caller and abort request
processing when initialization fails.
Found by Linux Verification Center (linuxtesting.org) with SVACE.