In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: Fix UAF read of dev->name
bnep_add_connection() needs to keep holding the bnep_session_sem while
reading dev->name (just like bnep_get_connlist() does); otherwise the
bnep_session() thread can concurrently free the net_device, which can for
example be triggered by a concurrent bnep_del_connection().
(This UAF is fairly uninteresting from a security perspective;
calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN)
check. It also requires completely tearing down a netdev during a fairly
tight race window.)
phonet/pep: disable BH around forwarded sk_receive_skb()
In the Linux kernel, the following vulnerability has been resolved:
phonet/pep: disable BH around forwarded sk_receive_skb()
The networking receive path is usually run from softirq context, but
protocols that take the socket lock may have packets stored in the
backlog and processed later from process context. In that case
release_sock() -> __release_sock() drops the slock with spin_unlock_bh()
and then calls sk->sk_backlog_rcv() with bottom halves enabled.
Typical sk_backlog_rcv handlers process the socket whose backlog is
being drained, so the BH state at entry is irrelevant for the slocks
they touch. pep_do_rcv() is different: when the i
spi: qup: fix error pointer deref after DMA setup failure
In the Linux kernel, the following vulnerability has been resolved:
spi: qup: fix error pointer deref after DMA setup failure
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to the clear the DMA channel pointers on setup failure to
avoid dereferencing an error pointer (or attempting to release a channel
a second time) on later probe errors or driver unbind.
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch.
ALSA: asihpi: Fix potential OOB array access at reading cache
In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access at reading cache
find_control() to retrieve a cached info accesses the array with the
given index blindly, which may lead to an OOB array access.
Add a sanity check for avoiding it.
In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: keep RBUF EEE/PM disabled
Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX
path on GENET hardware once MAC EEE becomes active. RX traffic stops
flowing while the link stays up and the usual descriptor/RX error
counters remain quiet. In that state the MAC still accepts frames
(rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to
DMA, so rx_packets is no longer incremented at the netdev level. On
some boards the corruption ends up as a paging fault in
skb_release_data via bcmgenet_rx_poll on an LPI exit.
Reproduced on Pi 4B (BC
In the Linux kernel, the following vulnerability has been resolved:
qed: fix double free in qed_cxt_tables_alloc()
If one of the later PF or VF CID bitmap allocations fails,
qed_cid_map_alloc() jumps to cid_map_fail and frees the previously
allocated CID bitmaps before returning an error. qed_cxt_tables_alloc()
then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()
again.
Fix this by setting each CID bitmap pointer to NULL after bitmap_free()
to avoid double free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under devel
vsock/vmci: fix UAF when peer resets connection during handshake
In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: fix UAF when peer resets connection during handshake
vmci_transport_recv_connecting_server() returned err = 0 for a peer
RST in its default switch arm:
err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL;
That made vmci_transport_recv_listen() skip vsock_remove_pending(),
leaving the pending socket on the listener's pending_links with
sk_state = TCP_CLOSE while destroy: still dropped the explicit
reference taken before schedule_delayed_work().
One second later vsock_pending_work() observed is_pending=true and
performed full cleanup: vsock_remove_
In the Linux kernel, the following vulnerability has been resolved:
ipv4: raw: reject IP_HDRINCL packets with ihl < 5
raw_send_hdrinc() validates that the caller-supplied IPv4 header
fits within the message length:
iphlen = iph->ihl * 4;
err = -EINVAL;
if (iphlen > length)
goto error_free;
if (iphlen >= sizeof(*iph)) {
/* fix up saddr, tot_len, id, csum, transport_header */
}
It does not, however, reject ihl < 5. For such a packet the
"if (iphlen >= sizeof(*iph))" branch is skipped, leaving the
crafted iphdr untouched, but the packet is still handed to
__ip_local_out() and onward. Downstream consumer
ixgbevf: fix use-after-free in VEPA multicast source pruning
In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: fix use-after-free in VEPA multicast source pruning
ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's
own address (VEPA multicast workaround) by freeing the skb and
continuing to the next descriptor:
dev_kfree_skb_irq(skb);
continue;
The skb pointer is declared outside the while loop and persists across
iterations. Because the continue skips the "skb = NULL" reset at the
bottom of the loop, the next iteration enters the "else if (skb)" path
and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing
skb_shinfo(skb)->nr_frags - a
af_unix: Fix UAF read of tail->len in unix_stream_data_wait()
In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix UAF read of tail->len in unix_stream_data_wait()
unix_stream_data_wait() does skb_peek_tail(&sk->sk_receive_queue) without
holding any lock that prevents SKBs on that queue from being dequeued and
freed.
This has been the case since commit 79f632c71bea ("unix/stream: fix
peeking with an offset larger than data in queue").
The first consequence of this is that the pointer comparison
`tail != last` can be false even if `last` semantically refers to an
already-freed SKB while `tail` is a new SKB allocated at the same address;
which can cause unix_stream_data_wait(
scsi: isci: Fix use-after-free in device removal path
In the Linux kernel, the following vulnerability has been resolved:
scsi: isci: Fix use-after-free in device removal path
The ISCI completion tasklet is initialized in isci_host_alloc()
(drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy
interrupt handlers (drivers/scsi/isci/host.c:223,613).
isci_host_deinit() stops the controller and waits for stop completion,
but it never kills completion_tasklet before teardown continues. A
top-of-function tasklet_kill() is not sufficient here: interrupts are
only disabled when isci_host_stop_complete() runs, so until
wait_for_stop() returns the IRQ handlers can still requeue the
tas
batman-adv: mcast: fix use-after-free in orig_node RCU release
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: mcast: fix use-after-free in orig_node RCU release
batadv_mcast_purge_orig() removes entries from RCU-protected hlists but
does not wait for an RCU grace period before returning. Concurrent RCU
readers may still accesses references to those entries at the point of
removal. RCU-protected readers trying to operate on entries like
orig->mcast_want_all_ipv6_node will then access already freed memory.
Fix this by moving batadv_mcast_purge_orig() to batadv_orig_node_release(),
just before the call_rcu() invocation. This ensures RCU readers that were
active at purge t
batman-adv: bla: avoid double decrement of bla.num_requests
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: avoid double decrement of bla.num_requests
The bla.num_requests is increased when no request_sent was in progress. And
it is decremented in various places (announcement was received, backbone is
purged, periodic work). But the check if the request_sent is actually set
to a specific state and the atomic_dec/_inc are not safe because they are
not atomic (TOCTOU) and multiple such code portions can run concurrently.
At the same time, it is necessary to modify request_sent (state) and
bla.num_requests atomically. Otherwise batadv_bla_send_request() might set
r
batman-adv: bla: avoid NULL-ptr deref for claim via dropped interface
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: avoid NULL-ptr deref for claim via dropped interface
Without rtnl_lock held, a hardif might be retrieved as primary interface of
a meshif, but then (while operating on this interface) getting decoupled
from the mesh interface. In this case, the meshif still exists but the
pointer from the primary hardif to the meshif is set to NULL.
The mesh_iface must be checked first to be non-NULL before continuing to
send an ARP request using meshif.
batman-adv: tt: fix TOCTOU race for reported vlans
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: fix TOCTOU race for reported vlans
The local TT based TVLV is generated by first checking the number of VLANs
which have at least one TT entry. A new buffer with the correct size for
the VLANs is then allocated. Only then, the list of VLANs s used to fill
the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock
is held. But the actual number of TT entries of each VLAN can still
increase during this time - just not the number of VLANs in the list.
But the prefilter used in the buffer size calculation might still cause an
increase of the nu
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: avoid empty VLAN responses
The commit 16116dac2339 ("batman-adv: prevent TT request storms by not
sending inconsistent TT TLVLs") added checks to the local (direct) TT
response code. But the response can also be done indirectly by another node
using the global TT state. To avoid such inconsistency states reported in
the original fix, also avoid sending empty VLANs for replies from the
global TT state.
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: fix negative last_changeset_len
batadv_piv_tt::last_changeset_len len was declared as s16, but the field is
never intended to hold a negative value. When a value greater than 32767 is
assigned, it wraps to a negative signed integer.
In batadv_send_my_tt_response(), last_changeset_len is temporarily widened
to s32. The incorrectly negative s16 value propagates into the s32, causing
batadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer but
populates only a small portion of it with the collected changeset. All
remaining bits are kept uninitialize
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: fix negative tt_buff_len
batadv_orig_node::tt_buff_len was declared as s16, but the field is never
intended to hold a negative value. When a value greater than 32767 is
assigned, it wraps to a negative signed integer.
In batadv_send_other_tt_response(), tt_buff_len is temporarily widened to
s32. The incorrectly negative s16 value propagates into the s32, causing
batadv_tt_prepare_tvlv_global_data() to allocate a full sized buffer but
populates only a small portion of it with the collected changeset. All
remaining bits are kept uninitialized.
Using an u16 a
security/keys: fix missed RCU read section on lookup
In the Linux kernel, the following vulnerability has been resolved:
security/keys: fix missed RCU read section on lookup
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
In the Linux kernel, the following vulnerability has been resolved:
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
nexio_read_data() pulls data_len and x_len from a packed __be16 header
in the device's interrupt packet and then walks packet->data[0..x_len)
and packet->data[x_len..data_len) comparing each byte against a
threshold.
Both fields are 16-bit on the wire (max 65535). The existing
adjustments shave at most 0x100 / 0x80 off, so the loop bound can still
reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size
(1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the
packed header —