wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
Watchdog task might end between send_sig() and kthread_stop() calls, what
results in the use-after-free issue. Fix this by increasing watchdog task
reference count before calling send_sig() and dropping it by switching to
kthread_stop_put().
RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq()
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq()
Sashiko points out that mlx4_srq_alloc() was not undone during error
unwind, add the missing call to mlx4_srq_free().
ipmi: Add limits to event and receive message requests
In the Linux kernel, the following vulnerability has been resolved:
ipmi: Add limits to event and receive message requests
The driver would just fetch events and receive messages until the
BMC said it was done. To avoid issues with BMCs that never say they are
done, add a limit of 10 fetches at a time.
In addition, an si interface has an attn state it can return from the
hardware which is supposed to cause a flag fetch to see if the driver
needs to fetch events or message or a few other things. If the attn
bit gets stuck, it's a similar problem. So allow messages in between
flag fetches so the driver itself doesn't get stuck.
This is a
f2fs: fix fsck inconsistency caused by FGGC of node block
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix fsck inconsistency caused by FGGC of node block
During FGGC node block migration, fsck may incorrectly treat the
migrated node block as fsync-written data.
The reproduction scenario:
root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync
root@vm:/mnt/f2fs# rm -f 1
root@vm:/mnt/f2fs# sync
root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The root cause is that GC does not clear the dentry mark and fsync
x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache
In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache
Make sure resources are not improperly shared in the op cache and
cause instruction corruption this way.
hfsplus: fix uninit-value by validating catalog record size
In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix uninit-value by validating catalog record size
Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The
root cause is that hfs_brec_read() doesn't validate that the on-disk
record size matches the expected size for the record type being read.
When mounting a corrupted filesystem, hfs_brec_read() may read less data
than expected. For example, when reading a catalog thread record, the
debug output showed:
HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26
HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ!
hfs_brec_
usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl
In the Linux kernel, the following vulnerability has been resolved:
usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl
Just like in a previous problem in this driver, usblp_ctrl_msg() will
collapse the usb_control_msg() return value to 0/-errno, discarding the
actual number of bytes transferred.
Ideally that short command should be detected and error out, but many
printers are known to send "incorrect" responses back so we can't just
do that.
statusbuf is kmalloc(8) at probe time and never filled before the first
LPGETSTATUS ioctl.
usblp_read_status() requests 1 byte. If a malicious printer responds
with zero bytes, *statusbuf
wifi: b43legacy: enforce bounds check on firmware key index in RX path
In the Linux kernel, the following vulnerability has been resolved:
wifi: b43legacy: enforce bounds check on firmware key index in RX path
Same fix as b43: the firmware-controlled key index in b43legacy_rx()
can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is
non-enforcing in production builds, allowing an out-of-bounds read of
dev->key[].
Make the check enforcing by dropping the frame for invalid indices.
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
setup_geo() extracts near_copies (nc) and far_copies (fc) from the
user-provided layout parameter without checking for zero. When fc=0
with the "improved" far set layout selected, 'geo->far_set_size =
disks / fc' triggers a divide-by-zero.
Validate nc and fc immediately after extraction, returning -1 if
either is zero.
btrfs: fix missing last_unlink_trans update when removing a directory
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix missing last_unlink_trans update when removing a directory
When removing a directory we are not updating its last_unlink_trans field,
which can result in incorrect fsync behaviour in case some one fsyncs the
directory after it was removed because it's holding a file descriptor on
it.
Example scenario:
mkdir /mnt/dir1
mkdir /mnt/dir1/dir2
mkdir /mnt/dir3
sync -f /mnt
# Do some change to the directory and fsync it.
chmod 700 /mnt/dir1
xfs_io -c fsync /mnt/dir1
# Move dir2 out of dir1 so that dir1 becomes empty.
mv /mnt/dir1/dir2 /mnt
btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leak
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leak
btrfs_ioctl_space_info() has a TOCTOU race between two passes over the
block group RAID type lists. The first pass counts entries to determine
the allocation size, then the second pass fills the buffer. The
groups_sem rwlock is released between passes, allowing concurrent block
group removal to reduce the entry count.
When the second pass fills fewer entries than the first pass counted,
copy_to_user() copies the full alloc_size bytes including trailing
uninitialized kmalloc bytes to userspace
ALSA: pcm: oss: Fix data race at accessing runtime.oss.trigger
In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: oss: Fix data race at accessing runtime.oss.trigger
Currently the runtime.oss.trigger field may be accessed concurrently
without protection, which may lead to the data race. And, in this
case, it may lead to more severe problem because it's a bit field; as
writing the data, it may overwrite other bit fields as well, which
confuses the operation completely, as spotted by fuzzing.
Fix it by covering runtime.oss.trigger bit fled also with the existing
params_lock mutex in both snd_pcm_oss_get_trigger() and
snd_pcm_oss_poll().
In the Linux kernel, the following vulnerability has been resolved:
8021q: delete cleared egress QoS mappings
vlan_dev_set_egress_priority() currently keeps cleared egress
priority mappings in the hash as tombstones. Repeated set/clear cycles
with distinct skb priorities therefore accumulate mapping nodes until
device teardown and leak memory.
Delete mappings when vlan_prio is cleared instead of keeping tombstones.
Now that the egress mapping lists are RCU protected, the node can be
unlinked safely and freed after a grace period.
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
In the Linux kernel, the following vulnerability has been resolved:
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usblp_ctrl_msg() collapses the usb_control_msg() return value to
0/-errno, discarding the actual number of bytes transferred. A broken
printer can complete the GET_DEVICE_ID control transfer short and the
driver has no way to know.
usblp_cache_device_id_string() reads the 2-byte big-endian length prefix
from the response and trusts it (clamped only to the buffer bounds).
The buffer is kmalloc(1024) at probe time. A device that sends exactly
two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves
device
In the Linux kernel, the following vulnerability has been resolved:
fanotify: fix false positive on permission events
fsnotify_get_mark_safe() may return false for a mark on an unrelated group,
which results in bypassing the permission check.
Fix by skipping over detached marks that are not in the current group.
scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()
target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a
256-byte stack buffer, then will memcpy() cur_len bytes from that
buffer. snprintf() returns the length the output would have had, which
can exceed the buffer size when the fabric WWN is long because iSCSI IQN
names can be up to 223 bytes. The check at the memcpy() site only
guards the destination page write, not the source read, so memcpy() will
read past the stack buffer and copy adjacent stack contents to the sysfs
reader, w
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
Two bugs exist in the vCPU initialisation path:
1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup
path jumps to 'unlock' without calling unpin_host_vcpu() or
unpin_host_sve_state(), permanently leaking pin references on the
host vCPU and SVE state pages.
Extract a register_hyp_vcpu() helper that performs the checks and
the store. When register_hyp_vcpu() returns an error, call
unpin_host_vcpu() and unpin_host_sve_state() inline before falling
through to the exis
RDMA/rxe: Reject unknown opcodes before ICRC processing
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject unknown opcodes before ICRC processing
Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC
before payload_size() in rxe_rcv"), a single unauthenticated UDP packet
can still trigger panic. That patch handled payload_size() underflow only
for valid opcodes with short packets, not for packets carrying an unknown
opcode. The unknown-opcode OOB read described below predates that commit
and reaches back to the initial Soft RoCE driver.
The check added there reads
pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE
where he
ipmi: Check event message buffer response for bad data
In the Linux kernel, the following vulnerability has been resolved:
ipmi: Check event message buffer response for bad data
The event message buffer response data size got checked later when
processing, but check it right after the response comes back. It
appears some BMCs may return an empty message instead of an error
when fetching events.
There are apparently some new BMCs that make this error, so we need to
compensate.
RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp()
In the Linux kernel, the following vulnerability has been resolved:
RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp()
Sashiko points out that pd->uctx isn't initialized until late in the
function so all these error flow references are NULL and will crash. Use
the uctx that isn't NULL.