mtd: slram: remove failed entries from the device list
In the Linux kernel, the following vulnerability has been resolved:
mtd: slram: remove failed entries from the device list
register_device() links a new slram_mtdlist entry before allocating all
of the state needed by the entry. If a later allocation, memremap(), or
mtd_device_register() fails, the partially initialized entry remains on
the global list. A later cleanup can then dereference or free invalid
state from that failed entry.
Unwind the partially initialized entry and clear the list tail on each
failure path after the entry has been linked.
mtd: maps: vmu-flash: fix fault in unaligned fixup
In the Linux kernel, the following vulnerability has been resolved:
mtd: maps: vmu-flash: fix fault in unaligned fixup
Use kzalloc_obj() / kzalloc_objs() to allocate the memcard structs,
instead of kmalloc_obj() / kmalloc_objs() to prevent access to
uninitialized data.
Fixes runtime error: Fault in unaligned fixup: 0000 [#1] at
mtd_get_fact_prot_info.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
net/9p: fix infinite loop in p9_client_rpc on fatal signal
In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix infinite loop in p9_client_rpc on fatal signal
When p9_client_rpc() is called with type P9_TFLUSH and the transport
has no peer (e.g. fd transport backed by pipes with no 9p server),
a fatal signal causes an infinite loop:
again:
err = io_wait_event_killable(req->wq, ...)
/* SIGKILL wakes the task, returns -ERESTARTSYS */
if (err == -ERESTARTSYS && c->status == Connected &&
type == P9_TFLUSH) {
sigpending = 1;
clear_thread_flag(TIF_SIGPENDING);
goto again;
}
clear_thread_flag() clears TIF_SIGPENDING before jumping back to
io_wait_event_killable(
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: avoid moving extents to occupied clusters
For non-auto OCFS2_IOC_MOVE_EXT operations, userspace supplies a physical
me_goal. ocfs2_move_extent() initializes new_phys_cpos from that goal and
expects ocfs2_probe_alloc_group() to replace it with a free run in the
target block group.
The probe currently leaves *phys_cpos unchanged if the scan reaches the
end of the group without finding a free run. An occupied goal at the last
bit can therefore survive the probe and be passed to
__ocfs2_move_extent(), which copies file data into a cluster still owned
by another inode
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
[BUG]
A direct write over unwritten extents can panic the kernel in
ocfs2_assure_trans_credits() when the journal aborts during DIO
completion. The crash is a general protection fault from a NULL pointer
dereference.
[CAUSE]
ocfs2_dio_end_io_write() loops over a direct write's unwritten extents,
marking each written under a single journal handle. If the journal
aborts (for example after an I/O error) while the extent tree is being
updated, the handle is left aborted with its transaction pointer
cleared. The
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
[BUG]
On-disk corruption setting l_next_free_rec to 0 in an inode's embedded
extent list triggers a UBSAN panic on the next write to that file.
[CAUSE]
ocfs2_sum_rightmost_rec() computes
i = le16_to_cpu(el->l_next_free_rec) - 1
and accesses el->l_recs[i] without validating i. When l_next_free_rec
is 0, i becomes -1; when l_next_free_rec exceeds l_count, i falls
past the end of the array. Either case violates the
__counted_by_le(l_count) annotation on l_recs[] and triggers UBSAN.
[FIX]
Validate the inode
ocfs2: reject dinodes with non-canonical i_mode type
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject dinodes with non-canonical i_mode type
Patch series "ocfs2: harden inode validators against forged metadata", v2.
This series adds three structural checks to OCFS2 dinode validation so
malformed on-disk fields are rejected before ocfs2_populate_inode() copies
them into the in-core inode.
The checks cover:
- i_mode values whose type bits do not name a canonical POSIX file
type;
- non-device dinodes whose id1.dev1.i_rdev field is non-zero; and
- non-inline dinodes that claim non-zero i_size while i_clusters is
zero, covering directories uncondit
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
ocfs2: reject non-inline dinodes with i_size and zero i_clusters
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject non-inline dinodes with i_size and zero i_clusters
On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a
non-inline regular file with non-zero i_size and zero i_clusters is
structurally malformed: the extent map declares no allocated clusters yet
the size header claims content exists. Keep rejecting that shape, but
express it through a shared predicate so the same invariant is available
to normal inode reads and online filecheck.
The same zero-cluster shape is also malformed for non-inline directories.
ocfs2 directory growth allocates backing s
net: thunderbolt: Fix frags[] overflow by bounding frame_count
In the Linux kernel, the following vulnerability has been resolved:
net: thunderbolt: Fix frags[] overflow by bounding frame_count
tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The
first frame goes into the skb linear area and every further frame is added as
a page fragment.
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
page, hdr_size, frame_size,
TBNET_RX_PAGE_SIZE - hdr_size);
A packet of frame_count frames therefore ends up with frame_count - 1
fragments. tbnet_check_frame() only bounds the peer supplied frame_count to
TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A
peer
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
mtd: spi-nor: swp: Improve locking user experience
In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: swp: Improve locking user experience
In the case of the first block being locked (or the few first blocks),
if the user want to fully unlock the device it has two possibilities:
- either it asks to unlock the entire device, and this works;
- or it asks to unlock just the block(s) that are currently locked,
which fails.
It fails because the conditions "can_be_top" and "can_be_bottom" are
true. Indeed, in this case, we unlock everything, so the TB bit does not
matter. However in the current implementation, use_top would be true (as
this is the favourite optio
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
irqchip/crossbar: Use correct index in crossbar_domain_free()
In the Linux kernel, the following vulnerability has been resolved:
irqchip/crossbar: Use correct index in crossbar_domain_free()
crossbar_domain_free() resets the domain data and then uses the nulled
out irq_data->hwirq member as index to reset the irq_map[] entry and to
write the relevant crossbar register with a safe entry. That means it
never frees the correct index and keeps the crossbar register connection
to the source interrupt active.
If it would not reset the domain data, then this would be even worse as
irq_data->hwirq holds the source interrupt number, but both the map and
register index need the corresponding GIC SPI number an
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
tpm: tpm_tis_spi: Use wait_woken() in wait_for_tmp_stat()
In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_tis_spi: Use wait_woken() in wait_for_tmp_stat()
wait_event_interruptible_timeout() evaluates its condition after setting
the current task state to TASK_INTERRUPTIBLE.
With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait
path is used:
tpm_tis_status()
tpm_tis_spi_read_bytes()
tpm_tis_spi_transfer_full()
spi_bus_lock()
mutex_lock()
Address this with the following measures:
1. Call wait_tpm_stat_cond() only while tasking is running.
2. Use wait_woken() to wait for changes.
platform/x86: dell-laptop: fix missing cleanups in init error path
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-laptop: fix missing cleanups in init error path
dell_init() initializes several resources after dell_setup_rfkill(),
including the optional touchpad LED, keyboard backlight LED, battery
hook, debugfs directory and dell-laptop notifier.
If a later LED or backlight registration fails, the error path only
tears down the battery hook and rfkill resources. This leaves the
notifier, debugfs directory, keyboard backlight LED and optional
touchpad LED registered after dell_init() returns an error.
Add the missing cleanup calls before tearing down rfkill.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
xen/gntdev: fix error handling in ioctl
In the Linux kernel, the following vulnerability has been resolved:
xen/gntdev: fix error handling in ioctl
When gntdev_ioctl_map_grant_ref() fails to copy the operation result
back to userspace after successfully adding the mapping to the list,
the error path returns -EFAULT without releasing the reference
acquired by gntdev_alloc_map(). The mapping remains in priv->maps
with a refcount of 1, causing a memory leak and a dangling list
entry.
Additionally, gntdev_add_map() may modify map->index to avoid overlap
with existing mappings. Therefore, the index returned to userspace
must be obtained after gntdev_add_map() completes.
Fix this by
can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure
In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure
bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking
lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all
mutate both fields under that same lock. Because the lockless reads
and the locked writes are unordered with respect to each other, a
racing bcm_notify() (device unregister) or bcm_connect() (concurrent
bind on another thread sharing the socket) can make bcm_sendmsg()
observe an inconsistent combination, e.g. a stale bound=1 together
with the now-cleared ifindex=0, silent
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
can: bcm: fix CAN frame rx/tx statistics
In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix CAN frame rx/tx statistics
KCSAN detected a data race within the bcm_rx_handler() when two CAN frames
have been simultaneously received and processed in a single rx op by two
different CPUs.
Use atomic operations with (signed) long data types to access the
statistics in the hot path to fix the KCSAN complaint.
Additionally simplify the update and check of statistics overflow by
using the atomic operations in separate bcm_update_[rx|tx]_stats()
functions. The rx variant runs under bcm_rx_update_lock to prevent
races when resetting the two rx counters; the tx
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()
In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()
For an rx op subscribed on all interfaces (ifindex == 0), the same op
is registered once in the shared per-netns wildcard filter list, so
bcm_rx_handler() can run concurrently on different CPUs for frames
arriving on different net devices.
op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was
taken, allowing concurrent writers to race each other - including a torn
store of the 64-bit rx_stamp on 32-bit platforms.
Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex
can: bcm: fix stale rx/tx ops after device removal
In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix stale rx/tx ops after device removal
RX: an RX_SETUP update(!) for an existing op skipped can_rx_register()
unconditionally, even when a concurrent NETDEV_UNREGISTER had already
torn down its registration (op->rx_reg_dev == NULL). This silently
did not re-enable frame delivery for that updated filter. bcm_rx_setup()
now re-registers in that case, while leaving rx_ops with ifindex = 0
(all CAN devices) which never carry a tracked rx_reg_dev registered as-is.
TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving
tx_ops with an active cyclic tra
can: bcm: track a single source interface for ANYDEV timeout/throttle ops
In the Linux kernel, the following vulnerability has been resolved:
can: bcm: track a single source interface for ANYDEV timeout/throttle ops
An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or
throttle timer has no defined semantics when matching frames arrive
from several interfaces: bcm_rx_handler() can run concurrently for
the same op on different CPUs, racing hrtimer_cancel()/
bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing
spurious RX_TIMEOUT notifications and last_frames corruption. The
same concurrency lets throttled multiplex frames from different
interfaces clobber the single rx_ifindex/rx_stamp fields