Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
RDMA/mlx5: Drain RCU callbacks during module teardown
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Drain RCU callbacks during module teardown
devx_free_subscription() can remain queued after the last DevX event file
drops its module reference or an auxiliary driver detaches its devices.
mlx5_ib can then unload before the callback runs.
Registration error unwind has the same risk because driver registration
can attach existing devices before failing. Wait after all drivers have
stopped.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
RDMA/ipoib: Drain RCU callbacks during module teardown
In the Linux kernel, the following vulnerability has been resolved:
RDMA/ipoib: Drain RCU callbacks during module teardown
IPoIB reclamation completions can be signaled from inside an RCU callback.
Teardown can wake before the callback returns and unload ib_ipoib while its
code is still executing.
Client registration failure can also remove already-added devices and queue
callbacks. Wait after client and workqueue teardown.
esp: do not unref managed frag pages in esp_ssg_unref()
In the Linux kernel, the following vulnerability has been resolved:
esp: do not unref managed frag pages in esp_ssg_unref()
esp_ssg_unref() releases the page references held on the source
scatterlist after the AEAD operation completes. It calls
skb_page_unref() on every frag page for an out-of-place transform
(req->src != req->dst), and in the error path of esp_output_tail()
(already_unref == true) on the request's own scatterlist.
This is wrong when the skb carries managed frags
(SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf
and the skb does not hold a per-frag page reference; io_uring SEND_ZC
with a registered bu
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
RDMA/rvt: Return NULL after port allocation failure
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rvt: Return NULL after port allocation failure
rvt_alloc_device() deallocates the IB device when its port array cannot
be allocated but then returns the pointer to the released allocation.
Callers treat any non-NULL value as valid and dereference it, resulting
in a use-after-free.
Return NULL immediately after deallocation so callers can propagate the
allocation failure.
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
RDMA/hfi1: Preserve unit 0 on allocation failure
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Preserve unit 0 on allocation failure
hfi1_free_devdata() assumes that the device was inserted into the unit
table and unconditionally erases dd->unit. If xa_alloc_irq() fails, the
zero-initialized unit remains zero, so full cleanup can remove an
unrelated device from index 0.
Release only the rdmavt allocation and return immediately while the unit
table has not acquired the device.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
RDMA/hfi1: Free RX data on late probe failure
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Free RX data on late probe failure
hfi1_init_dd() allocates the shared AIP/VNIC RX support before returning.
If hfi1_init() or hfi1_register_ib_device() later fails, init_one() tears
down the device data without calling hfi1_free_rx(). This leaks netdev_rx
and its dummy netdev.
Free the RX support after IB unregistration and before postinit_cleanup(),
as done on normal device removal.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that
need the structure to remain valid across a sleep (while waiting on acquiring
rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with
rdtgroup_kn_put().
The release path is intended to serve as the fallback freer: if the count
drops to zero and the group has already been marked RDT_DELETED,
rdtgroup_kn_put() frees the structure.
The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting
from a resctrl d
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
fs/resctrl: Fix UAF from worker threads when domains are removed
In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix UAF from worker threads when domains are removed
The mbm_handle_overflow() and cqm_handle_limbo() workers read event counters
and may sleep while doing so. They are scheduled via delayed_work embedded in
struct rdt_l3_mon_domain. Architecture allocates and frees these domains from
CPU hotplug callbacks under cpus_write_lock(), and the workers acquire
cpus_read_lock() to keep the domain alive across their access.
A use-after-free can occur when a worker is blocked waiting for
cpus_read_lock() while the hotplug core holds cpus_write_lock(): the
architecture f
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
rpmsg: glink: fix deadlock in endpoint destroy during driver detach
In the Linux kernel, the following vulnerability has been resolved:
rpmsg: glink: fix deadlock in endpoint destroy during driver detach
During driver detach, the device core holds the device mutex throughout
the driver's remove callback chain. When the rpmsg endpoint is
destroyed as part of that teardown, the GLINK endpoint destroy
implementation attempts to unregister the underlying rpmsg device.
That unregistration calls device_del(), which tries to re-acquire the
same device mutex already held higher up the stack, causing rmmod to
hang indefinitely.
The deadlock manifests with the following call chain:
[<0>] device_del+0x44/0x414 <-
hfsplus: validate thread record before delete key rebuild
In the Linux kernel, the following vulnerability has been resolved:
hfsplus: validate thread record before delete key rebuild
hfsplus_delete_cat() is called with str == NULL when the last open
reference to an unlinked HFS+ hardlink backing inode is closed. In that
case, the function finds the catalog thread by CNID and rebuilds the
catalog key from thread.nodeName.
That reconstruction path reads thread.nodeName.length directly from the
catalog B-tree into fd.search_key and then copies length * 2 bytes into
fd.search_key->cat.name.unicode. It does not first check that the found
record is a thread record or that its size matches the thread n
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
firmware: arm_scmi: Publish channel state before callbacks
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Publish channel state before callbacks
Transport setup can enable callbacks before the setup routine returns.
mailbox_chan_setup() registers the mailbox client with
mbox_request_channel(), and the mailbox controller startup path can enable
interrupt delivery before SCMI mailbox channel state has been published.
Similarly, smc_chan_setup() requests the optional A2P completion IRQ before
the SMC transport has made its cinfo pointer visible.
If a pending or spurious callback fires in those windows, the transport RX
callback can dereference a NULL transport
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
firmware: arm_scmi: Quiesce notifications before teardown
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Quiesce notifications before teardown
scmi_notification_exit() clears and releases the notification instance,
but transport callbacks can still deliver incoming notifications until
the TX/RX channels are freed. During remove, an RX interrupt in that
window can enter scmi_notify() while notification state is being torn
down and then dereference freed memory. The same ordering exists on the
probe error path after notification initialization.
The notification late-init worker has a separate lifetime issue: protocol
event registration queues ni->init_work o
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix SCMI device destroy lifetimes
scmi_child_dev_find() drops the reference returned by
device_find_child() before returning the scmi_device pointer. A
concurrent unregister can then release the device while the destroy path
is still using the returned pointer.
Make the lookup helper return the device_find_child() reference and keep
it until scmi_device_destroy() has finished unregistering the child.
Also split device_unregister() in __scmi_device_destroy() so the SCMI bus
ID is not made reusable until after device_del() has removed the old
scmi_dev.N
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
irqchip/renesas-irqc: Fix generic interrupt chip leak on remove
In the Linux kernel, the following vulnerability has been resolved:
irqchip/renesas-irqc: Fix generic interrupt chip leak on remove
The driver allocates domain generic chips probe. However, on driver
removal, the generic chips are not automatically freed when the interrupt
domain is removed because the domain flags do not include
IRQ_DOMAIN_FLAG_DESTROY_GC.
This causes both the domain generic chips structure and the associated
generic chips to be leaked. Additionally, the generic chips remain on the
global list and may later be accessed by generic interrupt chip suspend,
resume, or shutdown callbacks after the driver has been removed,
pote
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
drm/bridge: tc358767: clamp the reported AUX read size to the request
In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: tc358767: clamp the reported AUX read size to the request
tc_aux_transfer() clamps an AUX read to the payload limit:
size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
After the transfer it replaces size with the byte count the controller
reports in AUX_BYTES:
if (size)
size = FIELD_GET(AUX_BYTES, auxstatus);
AUX_BYTES is GENMASK(15, 8), so it can be up to 255. Nothing clamps it
back to the request. tc_aux_read_data() reads that many bytes into the
16-byte auxrdata stack buffer, then copies them into the caller buffer. A
reported count
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments
Make sure we don't end-up with a num_frags = 0 situation.
For that, check that the required size is not 0 and put a checker on
num_frags as well.
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
gpu: host1x: Avoid stack over-read in debug output helpers
In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Avoid stack over-read in debug output helpers
host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which
returns the length the formatted string would have reached with an
unbounded buffer. That return value was passed straight to o->fn as
the number of bytes to emit.
This could cause a read past end of the output buffer if a call to
host1x_debug_* produced a string longer than 256 bytes. This only
affected the debugfs files as the printk debug sink ignores the
number of bytes. In practice, this is very unlikely to occur.
Fix by switching to vscnpr
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
drm/msm: Only fini scheduler after successful init
In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Only fini scheduler after successful init
msm_ringbuffer_new() destroys a partially initialized ring through
msm_ringbuffer_destroy() when an allocation or scheduler setup step
fails.
If drm_sched_init() fails before it finishes initializing the scheduler,
the failure path still calls drm_sched_fini(). That teardown path assumes
the scheduler work items, lists, and workqueue state were initialized.
Track successful scheduler initialization and call drm_sched_fini() only
after drm_sched_init() returned 0.
This issue was found by a static analysis checker and conf
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_uac1_legacy: remove broken string configfs attributes
The UAC1_STR_ATTRIBUTE macro defines configfs show/store handlers for
the fn_play, fn_cap, and fn_cntl string options. The store function
contains an inverted null check on the kstrndup() return value.
This means every write attempt returns -ENOMEM on success and
dereferences a NULL pointer on allocation failure. The attributes
have been broken and unused for many years.
Remove the UAC1_STR_ATTRIBUTE macro and the three attributes it
generated. The internal defaults (FILE_PCM_PLAYBACK, FILE_PCM_CAPTURE,
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
UDF symlink pathComponent header OOB read
In the Linux kernel, the following vulnerability has been resolved:
UDF symlink pathComponent header OOB read
udf_symlink_filler() can enter udf_pc_to_char() with a partial pathComponent header.
Validate that enough input remains for a complete pathComponent header
before accessing it. Reject malformed symlink data that would otherwise
make udf_pc_to_char() perform an out-of-bounds read.