PatchFirst · Aktuelle Sicherheitslücken
In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux-fips: 814. Davon im KEV-Katalog: 0.
Sicherheitslücken: 9434
In the Linux kernel, the following vulnerability has been resolved: s390/qeth: Check CAP_NET_ADMIN for private ioctls Gate the SIOCDEVPRIVATE ioctl commands SIOC_QETH_ADP_SET_SNMP_CONTROL, SIOC_QETH_GET_CARD_TYPE and SIOC_QETH_QUERY_OAT with CAP_NET_ADMIN capable check to ensure unprivileged users cannot invoke them.
In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used.
In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix potential UAF on meter attach failure While attaching a newly created meter attach_meter() function makes the new meter visible to other CPUs but can still fail afterwards. On failure, it detaches the meter back and returns an error. However, this is an unexpected behavior for the ovs_meter_cmd_set() that uses a plain kfree(meter) on attach failure without waiting for RCU readers to stop using it, assuming it was never visible. This is never a problem for ovs-vswitchd as it always creates meters before creating any flows that use them. But the UAF c
In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko.
In the Linux kernel, the following vulnerability has been resolved: i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock Fix a severe AB/BA deadlock between the Common Clock Framework (CCF) and the I2C adapter lock, which triggers when an I2C-controlled clock generator client (like the Si5351) is registered or modified under the CCF. During an i2c client clock (generator) frequency change, the CCF acquires its global 'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's chip registers, stalling for the adapter's I2C bus lock. Concurrently, an independent, parallel transfer on the same
In the Linux kernel, the following vulnerability has been resolved: i2c: imx: Cancel hrtimer before clearing slave pointer In i2c_imx_unreg_slave(), the slave pointer is set to NULL after disabling interrupts. However, a pending interrupt might already have started the hrtimer (i2c_imx_slave_timeout) before the pointer was cleared. If the hrtimer fires after i2c_imx->slave is set to NULL, the timer callback i2c_imx_slave_finish_op() will call i2c_imx_slave_event() with a NULL slave pointer, which results in a use-after-free / NULL pointer dereference. Fix by canceling the hrtimer and waiting for it to complete after disabling interrupts,
In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: validate CPC message lengths ems_usb_read_bulk_callback() walks CPC messages packed in one USB receive buffer. Check that each declared message fits in the URB payload. Also require the type-specific payload to cover the fields used by the CAN, state, error and overrun handlers.
In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure es58x_read_bulk_callback() resubmits the RX URB after processing a received packet. If the resubmit succeeds, the URB remains anchored and will be handled by the normal RX path or by teardown. However, if usb_submit_urb() fails, the callback unanchors the URB and then returns directly. This skips the existing free_urb path, so the coherent transfer buffer allocated with usb_alloc_coherent() is not released. Reuse the existing free_urb path after a resubmit failure so that the RX cohere
In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents The wait and bulk receive paths walk variable-length commands from a USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be dispatched, and the wait path copies a matching command into a fixed caller-owned struct kvaser_cmd using the device-provided length. Reject nonzero commands that do not contain the fixed header or that extend beyond the current USB buffer item. In the wait path, also reject a matching command that exceeds the destination before copying it.
In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error().
In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc() and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also frees the transfer buffer. If usb_submit_urb() fails, the error path frees the buffer explicitly with kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set, usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double free of the transfer buffer. BUG: KASAN: double-free in usb_free_urb.part.0+0
In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: validate uCAN receive record lengths pcan_usb_fd_decode_buf() walks uCAN records packed in one USB receive buffer. Require each record to contain the fixed header for its type, and verify CAN payload bytes before copying them into the skb.
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB binner BO, but writes the size of the whole BO to BPOS. On every binner out-of-memory event the PTB is therefore authorized to write tile lists across all the other slots (which may hold the tile state, tile alloc and overflow memory of in-flight jobs) and, for any slot but the first, past the end of the binner BO into unrelated CMA memory. Since CMA pages are recycled into page cache and user allocations, this is arbitrary memory co
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Zero the tile state data array before each BIN job The binner BO is a single 16MB buffer split into 512KB slots that are handed out to jobs at submission time and recycled as jobs complete, without ever being cleared. Each slot holds the job's Tile State Data Array (TSDA) at its start, followed by the tile allocation pool. While the tile allocation pool is only walked by the render thread through branches the binner generated during the current job, the TSDA is the PTB's own per-tile bookkeeping and is consumed by the hardware itself. Although the kernel sets the
In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix pptable use-after-free amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table after dropping adev->pm.mutex. The sysfs path then copies from that pointer. A concurrent pp_table write can replace and free the allocation during the copy, causing a use-after-free. Change the DPM interface to copy into caller-provided storage while the mutex is held. Keep the size-only query for attribute discovery without exposing the driver-owned pointer. (cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631)
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix QID bit leak in pqm_create_queue() When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during the first queue creation for a process, pqm_create_queue() returns early via 'return retval' without going through the err_create_queue cleanup label. This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called, leaving the reserved QID bit permanently set in queue_slot_bitmap. Over time this leaks QID slots, potentially exhausting all available queue slots. Fix this by replacing 'return retval' with 'goto err_allocate_pqn' so that clear_bit() is
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: hold event_mutex while checkpointing CRIU events kfd_criu_checkpoint_events() counts the entries in p->event_idr via kfd_get_num_events(), allocates an array sized to that count, and then walks the same IDR to fill it. Neither the count nor the walk holds p->event_mutex. The CRIU checkpoint caller holds only p->mutex. Event create and destroy (kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not take p->mutex, so a second thread in the same process can insert or remove events between the count and the walk. If an event is inserted, the walk it
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: reject DX_BIND_QUERY without a DX context vmw_cmd_dx_bind_query() unconditionally dereferences sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer dereference from any render-node fd by submitting an execbuf with dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY opcode in the command stream: dx_ctx_node is left NULL and the kernel oopses on the assignment. The same NULL is then re-read in vmw_resources_reserve() via vmw_context_get_dx_query_mob(). All sibling DX handlers fail-close on a missing dx_ctx_node using VMW_GET_CTX
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject unde
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: bound DMA command body size against suffix pointer vmw_cmd_dma() locates the DMA suffix at (unsigned long) &cmd->body + header->size - sizeof(*suffix) without checking that header->size is large enough to contain both cmd->body and the suffix. An undersized header makes the suffix pointer underflow back into the previous command in the bounce buffer. The verifier later writes suffix->maximumOffset, clobbering verified fields of an already-relocated earlier command -- a TOCTOU on the device-visible command stream that lets one command rewrite another's GMR i
Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.