RDMA/srpt: fix integer overflow in immediate data length check
In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: fix integer overflow in immediate data length check
imm_buf->len is a user-controlled uint32_t received from the network.
Adding it to imm_data_offset without overflow checking allows a
malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap
around to a small value, bypassing the bounds check, and subsequently
passing a ~4GB length to sg_init_one().
Use check_add_overflow() to detect wrapping before the comparison.
tracing: Bound synthetic-field strings with seq_buf
In the Linux kernel, the following vulnerability has been resolved:
tracing: Bound synthetic-field strings with seq_buf
The synthetic field helpers build a prefixed synthetic variable name and
a generated hist command in fixed MAX_FILTER_STR_VAL buffers. The
current code appends those strings with raw strcat(), so long key lists,
field names, or saved filters can run past the end of the staging
buffers.
Build both strings with seq_buf and propagate -E2BIG if either the
synthetic variable name or the generated command exceeds
MAX_FILTER_STR_VAL. This keeps the existing tracing-side limit while
using the helper intended for bounded command c
RDMA/irdma: Fix out-of-bounds write in irdma_copy_user_pgaddrs
In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix out-of-bounds write in irdma_copy_user_pgaddrs
The irdma_copy_user_pgaddrs function loops through all of the umem DMA
blocks to populate the PBLEs and will stop when either the last DMA
block is reached or palloc->total_cnt is reached. The issue is that
the logic for checking palloc->total_cnt would only work for non-zero
values.
When irdma_setup_pbles is called with lvl==0, it
calls irdma_copy_user_pgaddrs with palloc->total_cnt==0, which means
the only way to break out of the loop is to reach the last umem DMA
block, which means it could end up going beyo
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix log flood after cmd_mbox failure
hns_roce_cmd_mbox() is the command interface between driver and
hardware. When hardware is abnormal, the unlimited error printings
after hns_roce_cmd_mbox() failure will cause log flood and even
system crash.
Replace ibdev_err() and ibdev_warn() with their ratelimited versions
in the error handling path after hns_roce_cmd_mbox() (and its wrappers
hns_roce_create_hw_ctx/hns_roce_destroy_hw_ctx) fails.
ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data
In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data
The OSS sequencer processes the input MIDI bytes into a sequencer
event to be dispatched later (in snd_seq_oss_midi_putc() called from
snd_seq_oss_process_event()). When it's a SysEx data, the event
record contains data.ext.ptr pointer to the original SysEx bytes, and
the referred data is copied into the pool afterwards at dispatching.
The problem is that, if the sequencer port gets closed concurrently
before the dispatch, the OSS sequencer core also releases the
resources (in snd_seq_oss_midi_check_exit_p
ALSA: seq: midi: Serialize output teardown with event_input
In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: midi: Serialize output teardown with event_input
event_process_midi() borrows msynth->output_rfile.output and then
passes the substream to dump_midi() and snd_rawmidi_kernel_write()
without synchronizing with the output open/close transition.
midisynth_use() also publishes output_rfile before
snd_rawmidi_output_params() has finished.
The last midisynth_unuse() can therefore release the same rawmidi file
and free substream->runtime before snd_rawmidi_kernel_write1() takes
its runtime buffer reference. That leaves the event_input path using a
stale substream or ru
nvmet-tcp: fix page fragment cache leak in error path
In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix page fragment cache leak in error path
In nvmet_tcp_alloc_queue(), when a connection is closed during the
allocation process (e.g., nvmet_tcp_set_queue_sock() returns -ENOTCONN),
the error handling jumps to out_destroy_sq and then to out_ida_remove
without draining the page fragment cache.
Although nvmet_tcp_free_cmd() is called in some error paths to release
individual page fragments, the underlying page cache reference held by
queue->pf_cache is never released. The first allocation using pf_cache
is the call to nvmet_tcp_alloc_cmd() for queue->connect, whi
nvmet-tcp: check return value of nvmet_tcp_set_queue_sock
In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check return value of nvmet_tcp_set_queue_sock
The return value of nvmet_tcp_set_queue_sock() is currently ignored in
nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket
not being in TCP_ESTABLISHED state), the socket callbacks will not be
properly set, leading to queue and socket leakage.
Fix this by capturing the return value and calling
nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup.
nvme-multipath: fix flex array size in struct nvme_ns_head
In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: fix flex array size in struct nvme_ns_head
struct nvme_ns_head contains a flexible array member, current_path[],
which is indexed using the NUMA node ID:
head->current_path[numa_node_id()]
The structure is currently allocated as:
size = sizeof(struct nvme_ns_head) +
(num_possible_nodes() * sizeof(struct nvme_ns *));
head = kzalloc(size, GFP_KERNEL);
This allocation assumes that NUMA node IDs are sequential and densely
packed from 0 .. num_possible_nodes() - 1. While this assumption holds
on many systems, it is not always true on some architectures s
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd().
Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the
bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace
calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then
swaps prog/oldprog and recursively calls itself to roll back. But
bpf_tc_accept=0 makes the rollback fail too, which triggers yet another
rollback frame with the same arguments, and so on until the stack is
exhausted.
bpf_tc_accept is just a c
gpu: host1x: Allow entries in BO caches to be freed
In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Allow entries in BO caches to be freed
When a buffer object is pinned via host1x_bo_pin() with a cache, the
resulting mapping is kept in the cache so it can be reused on subsequent
pins. Each mapping held a reference to the underlying host1x_bo (taken
in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached,
the bo itself could not be freed.
However, the only way to remove the cached mapping was through the free
path of the buffer object. This meant that if a bo got cached, it could
never get freed again.
Resolve the circularity by holding a weak
gpu: host1x: Fix iommu_map_sgtable() return value check
In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix iommu_map_sgtable() return value check
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
pin_job() also was incorrectly assigning to 'int', which could cause
overflows into negative values.
Update pin_job() to correctly check for errors from iommu_map_sgtable.
dax/kmem: account for partial discontiguous resource upon removal
In the Linux kernel, the following vulnerability has been resolved:
dax/kmem: account for partial discontiguous resource upon removal
When dev_dax_kmem_probe() partially succeeds (at least one range is
mapped) but a subsequent range fails request_mem_region() or
add_memory_driver_managed(), the probe silently continues, ultimately
returning success, but with the corresponding range resource NULL'ed out.
dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if
the underlying resource exists. When remove_memory() is called later, it
returns 0 because the memory was never added which causes
dev_dax_kmem_remove() to incorrec
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix TOCTOU heap overflow in get_srq_wqe
get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue
buffer, which is mapped into userspace. It validates num_sge against
max_sge, but then re-reads the same field to calculate the memcpy
size. A concurrent userspace thread can modify num_sge between
validation and use, causing a heap buffer overflow when copying the
WQE into qp->resp.srq_wqe.
Read num_sge into a local variable and use it for both the bounds
check and the size calculation.
RDMA/rxe: Copy WQE to local buffer in non-SRQ receive path
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Copy WQE to local buffer in non-SRQ receive path
For non-SRQ QPs, the responder reads WQE fields directly from the
shared queue buffer mapped into userspace. This allows a malicious
user to modify fields like num_sge or sge entries while the kernel
is processing the WQE, leading to out-of-bounds reads in
rxe_resp_check_length() and copy_data().
Introduce get_recv_wqe() that validates num_sge and copies the WQE
to a kernel-local buffer before processing, matching the approach
already used for SRQ WQEs in get_srq_wqe(). The srq_wqe buffer is
reused since SRQ and no
md/raid10: reset read_slot when reusing r10bio for discard
In the Linux kernel, the following vulnerability has been resolved:
md/raid10: reset read_slot when reusing r10bio for discard
put_all_bios() always drops devs[i].bio, but it only drops
devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an
r10bio that was previously used for a read, read_slot can still be
non-negative, and discard cleanup can skip bio_put() on repl_bio.
Reset read_slot to -1 when preparing an r10bio for discard so the
replacement bio is always released correctly.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
md/raid1,raid10: fix deadlock in read error recovery path
In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix deadlock in read error recovery path
raid1d and raid10d may resubmit a split md cloned bio while handling
a read error. In this case, resubmitting the bio can lead to a deadlock
if the array is suspended before md_handle_request() acquires an
active_io reference via percpu_ref_tryget_live().
Since the cloned bio already holds an active_io reference,
trying to acquire another reference via percpu_ref_tryget_live()
can lead to a deadlock while the array is suspended.
Fix this by using percpu_ref_get() for md cloned bios.
md/raid1,raid10: fix error-path detection with md_cloned_bio()
In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
md/raid1,raid10: fix bio accounting for split md cloned bios
In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix bio accounting for split md cloned bios
Use md_cloned_bio() to control bio accounting instead of relying
on r1bio_existed in raid1 or the io_accounting flag in raid10.
The previous logic does not reliably reflect whether a bio is an
md cloned bio. When a failed bio is split and resubmitted via
bio_submit_split_bioset() on the error path, this can lead to either
double accounting for md cloned bios, or missing accounting for bios
returned from bio_submit_split_bioset()
Fix this by using md_cloned_bio() to detect md cloned bios and
skip accounting accor
wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic()
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic()
In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to
ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the
NWIFI header length is invalid, causing the function to abort early with
-EINVAL.
When this happens, the error propagates to
ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it
to NULL. As a result, the corresponding MSDU is no longer referenced
by the defragmentation path and is never freed.
This leads to a memory leak for the affected MSDU on this error path.
Pro