Sicherheitslücken in linux-realtime · Seite 190

efi: Allocate runtime workqueue before ACPI init

In the Linux kernel, the following vulnerability has been resolved: efi: Allocate runtime workqueue before ACPI init Since commit 5894cf571e14 ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers") ACPI PRM calls are delegated to a workqueue which runs in a kernel thread, making it easier to detect and mitigate faulting memory accesses performed by the firmware. Rafael reports that such PRM accesses may occur before efisubsys_init() executes, which is where the workqueue is allocated, leading to NULL pointer dereferences. Since acpi_init() [which triggers the early PRM accesses] executes as a subsys_initcall() as well, and has i

• Auf 6.8.1-1059.60 aktualisieren

drivers/base/memory: fix memory block reference leak in poison accounting

In the Linux kernel, the following vulnerability has been resolved: drivers/base/memory: fix memory block reference leak in poison accounting memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block via find_memory_block_by_id(), which acquires a reference to the memory block device. Both helpers use the returned memory block without dropping that reference, leaking the device reference on each successful lookup. Drop the reference after updating nr_hwpoison.

• Auf 6.8.1-1059.60 aktualisieren

mm/memory_hotplug: fix memory block reference leak on remove

In the Linux kernel, the following vulnerability has been resolved: mm/memory_hotplug: fix memory block reference leak on remove Patch series "mm: Fix memory block leaks and locking", v2. This series fixes two memory block device reference leaks and one locking issue around the per-memory_block hwpoison counter. This patch (of 2): remove_memory_blocks_and_altmaps() looks up each memory block with find_memory_block(), which acquires a reference to the memory block device. That reference is never dropped on this path, resulting in a leaked device reference when removing memory blocks and their altmaps. Drop the reference after retrievin

• Auf 6.8.1-1059.60 aktualisieren

net: wwan: iosm: fix potential memory leaks in ipc_imem_init()

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix potential memory leaks in ipc_imem_init() The memory allocated in ipc_protocol_init() is not freed on the error paths that follow in ipc_imem_init(). Fix that by calling the corresponding release function ipc_protocol_deinit() in the error path.

• Auf 6.8.1-1059.60 aktualisieren

Bluetooth: bnep: Fix UAF read of dev->name

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: Fix UAF read of dev->name bnep_add_connection() needs to keep holding the bnep_session_sem while reading dev->name (just like bnep_get_connlist() does); otherwise the bnep_session() thread can concurrently free the net_device, which can for example be triggered by a concurrent bnep_del_connection(). (This UAF is fairly uninteresting from a security perspective; calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN) check. It also requires completely tearing down a netdev during a fairly tight race window.)

• Auf 6.8.1-1059.60 aktualisieren

phonet/pep: disable BH around forwarded sk_receive_skb()

In the Linux kernel, the following vulnerability has been resolved: phonet/pep: disable BH around forwarded sk_receive_skb() The networking receive path is usually run from softirq context, but protocols that take the socket lock may have packets stored in the backlog and processed later from process context. In that case release_sock() -> __release_sock() drops the slock with spin_unlock_bh() and then calls sk->sk_backlog_rcv() with bottom halves enabled. Typical sk_backlog_rcv handlers process the socket whose backlog is being drained, so the BH state at entry is irrelevant for the slocks they touch. pep_do_rcv() is different: when the i

• Auf 6.8.1-1059.60 aktualisieren

wifi: cfg80211: advance loop vars in cfg80211_merge_profile()

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: advance loop vars in cfg80211_merge_profile() cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS profile that has been split across multiple consecutive MBSSID elements. Its while-loop calls cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem) but never advances mbssid_elem or sub_elem inside the body. Each iteration therefore searches for a continuation that follows the same fixed pair; the helper returns the same next_mbssid; and the same next_sub bytes are memcpy()'d into merged_ie at a growing offset until the buffe

• Auf 6.8.1-1059.60 aktualisieren

tracing: Do not call map->ops->elt_free() if elt_alloc() fails

In the Linux kernel, the following vulnerability has been resolved: tracing: Do not call map->ops->elt_free() if elt_alloc() fails In paths where tracing_map_elt_alloc() failed to allocate objects, the map->ops->elt_alloc() call was never successful. In this case, map->ops->elt_free() should not be called.

• Auf 6.8.1-1059.60 aktualisieren

spi: qup: fix error pointer deref after DMA setup failure

In the Linux kernel, the following vulnerability has been resolved: spi: qup: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to the clear the DMA channel pointers on setup failure to avoid dereferencing an error pointer (or attempting to release a channel a second time) on later probe errors or driver unbind. This issue was flagged by Sashiko when reviewing a devres allocation conversion patch.

• Auf 6.8.1-1059.60 aktualisieren

spi: sprd: fix error pointer deref after DMA setup failure

In the Linux kernel, the following vulnerability has been resolved: spi: sprd: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to check the dma.enabled flag before trying to release the DMA channels also on late probe errors to avoid dereferencing an error pointer (or attempting to release a channel a second time). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch.

• Auf 6.8.1-1059.60 aktualisieren

firmware: arm_ffa: Check for NULL FF-A ID table while driver registration

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Check for NULL FF-A ID table while driver registration The bus match callback assumes that every FF-A driver provides an id_table and dereferences it unconditionally. Enforce that contract at registration time so a buggy client driver cannot crash the bus during match.

• Auf 6.8.1-1059.60 aktualisieren

ARM: integrator: Fix early initialization

In the Linux kernel, the following vulnerability has been resolved: ARM: integrator: Fix early initialization Starting with commit bdb249fce9ad4 ("ARM: integrator: read counter using syscon/regmap"), intcp_init_early calls syscon_regmap_lookup_by_compatible which in turn calls of_syscon_register. This function allocates memory. Since the memory management code has not been initialized at that time, the call always fails. It either returns -ENOMEM or crashes as follows. Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read [0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 UI

• Auf 6.8.1-1059.60 aktualisieren

btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file()

In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file() The trace event btrfs_sync_file() is called in an atomic context (all trace events are) and its call to dput(), which is needed due to the call to dget_parent(), can sleep, triggering a kernel splat. This can be reproduced by enabling the trace event and running btrfs/056 from fstests for example. The splat shown in dmesg is the following: [53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970 [53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: x

• Auf 6.8.1-1056.57 aktualisieren

test_kprobes: clear kprobes between test runs

In the Linux kernel, the following vulnerability has been resolved: test_kprobes: clear kprobes between test runs Running the kprobes sanity tests twice makes all tests fail and eventually crashes the kernel. [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # Totals: pass:5 fail:0 skip:0 total:5 ok 1 kprobes_test [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # test_kprobe: EXPECTATION FAILED at lib/tests/test_kprobes.c:64 Expected 0 == register_kprobe(&kp), but register_kprobe(&kp) == -22 (0xffffffffffffffea) ... Unable to handle kernel paging request ... The

• Auf 6.8.1-1059.60 aktualisieren

netfs: Fix potential for tearing in ->remote_i_size and ->zero_point

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential for tearing in ->remote_i_size and ->zero_point Fix potential tearing in using ->remote_i_size and ->zero_point by copying i_size_read() and i_size_write() and using the same seqcount as for i_size. We need to make sure that netfslib and the filesystems that use it always hold i_lock whilst updating any of the sizes to prevent i_size_seqcount from getting corrupted.

wifi: ath11k: fix error path leaks in some WMI WOW calls

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix error path leaks in some WMI WOW calls Fix two instances where we used to directly return the result of ath11k_wmi_cmd_send(...). Because we did not check the return value, we also did not free the skb in the error path.

• Auf 6.8.1-1059.60 aktualisieren

drm/msm/adreno: Fix a reference leak in a6xx_gpu_init()

In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: Fix a reference leak in a6xx_gpu_init() In a6xx_gpu_init(), node is obtained via of_parse_phandle(). While there was a manual of_node_put() at the end of the common path, several early error returns would bypass this call, resulting in a reference leak. Fix this by using the __free(device_node) cleanup handler to release the reference when the variable goes out of scope. Patchwork: https://patchwork.freedesktop.org/patch/700661/

drm/msm: Fix iommu_map_sgtable() return value check and avoid WARN

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix iommu_map_sgtable() return value check and avoid WARN Commit "iommu: return full error code from iommu_map_sg[_atomic]()" changed iommu_map_sgtable() to return an ssize_t and negative values in error cases, rather than a size_t and a zero. Store the return value in the appropriate type and in case of error, return it rather than WARNing. Patchwork: https://patchwork.freedesktop.org/patch/719685/

• Auf 6.8.1-1059.60 aktualisieren

pds_core: fix error handling in pdsc_devcmd_wait

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix error handling in pdsc_devcmd_wait Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT

• Auf 6.8.1-1059.60 aktualisieren

pds_core: fix debugfs_lookup dentry leak and error handling

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix debugfs_lookup dentry leak and error handling debugfs_lookup() returns a dentry with an elevated reference count that must be released with dput(). The current code discards the returned dentry without calling dput(), causing a reference leak on every firmware reset recovery. Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup() returns ERR_PTR(-ENODEV), not NULL. The current check passes for error pointers and would call dput() on an invalid pointer, causing a crash.

• Auf 6.8.1-1059.60 aktualisieren