p PatchFirst

PatchFirst · Vulnerabilidades recientes

Vulnerabilidades de bind

Vulnerabilidades publicadas para bind en los últimos 30 días: 0. Incluidas en el catálogo KEV: 0.

Filtrar vulnerabilidades
Borrar filtros

Vulnerabilidades: 20

  1. ALPINE-CVE-2019-6471

    Media · CVSS 5.9Corrección disponible

    ALPINE-CVE-2019-6471

    A race condition which may occur when discarding malformed packets can result in BIND exiting due to a REQUIRE assertion failure in dispatch.c. Versions affected: BIND 9.11.0 -> 9.11.7, 9.12.0 -> 9.12.4-P1, 9.14.0 -> 9.14.2. Also all releases of the BIND 9.13 development branch and version 9.15.0 of the BIND 9.15 development branch and BIND Supported Preview Edition versions 9.11.3-S1 -> 9.11.7-S1.

    • Actualiza a 9.11.8-r0
    Publicación Actualización
  2. ALPINE-CVE-2019-6467

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2019-6467

    A programming error in the nxdomain-redirect feature can cause an assertion failure in query.c if the alternate namespace used by nxdomain-redirect is a descendant of a zone that is served locally. The most likely scenario where this might occur is if the server, in addition to performing NXDOMAIN redirection for recursive clients, is also serving a local copy of the root zone or using mirroring to provide the root zone, although other configurations are also possible. Versions affected: BIND 9.12.0-> 9.12.4, 9.14.0. Also affects all releases in the 9.13 development branch.

    • Actualiza a 9.11.6_p1-r0
    Publicación Actualización
  3. ALPINE-CVE-2019-6465

    Media · CVSS 5.3Corrección disponible

    ALPINE-CVE-2019-6465

    Controls for zone transfers may not be properly applied to Dynamically Loadable Zones (DLZs) if the zones are writable Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P2, 9.12.0 -> 9.12.3-P2, and versions 9.9.3-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2019-6465.

    • Actualiza a 9.11.5_p4-r0
    Publicación Actualización
  4. ALPINE-CVE-2018-5745

    Media · CVSS 4.9Corrección disponible

    ALPINE-CVE-2018-5745

    "managed-keys" is a feature which allows a BIND resolver to automatically maintain the keys used by trust anchors which operators configure for use in DNSSEC validation. Due to an error in the managed-keys feature it is possible for a BIND server which uses managed-keys to exit due to an assertion failure if, during key rollover, a trust anchor's keys are replaced with keys which use an unsupported algorithm. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P1, 9.12.0 -> 9.12.3-P1, and versions 9.9.3-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected. Ver

    • Actualiza a 9.11.5_p4-r0
    Publicación Actualización
  5. ALPINE-CVE-2018-5744

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2018-5744

    A failure to free memory can occur when processing messages having a specific combination of EDNS options. Versions affected are: BIND 9.10.7 -> 9.10.8-P1, 9.11.3 -> 9.11.5-P1, 9.12.0 -> 9.12.3-P1, and versions 9.10.7-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected.

    • Actualiza a 9.11.5_p4-r0
    Publicación Actualización
  6. ALPINE-CVE-2018-5743

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2018-5743

    By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development br

    • Actualiza a 9.11.6_p1-r0
    Publicación Actualización
  7. ALPINE-CVE-2018-5741

    Media · CVSS 6.5Corrección disponible

    ALPINE-CVE-2018-5741

    To provide fine-grained controls over the ability to use Dynamic DNS (DDNS) to update records in a zone, BIND 9 provides a feature called update-policy. Various rules can be configured to limit the types of updates that can be performed by a client, depending on the key used when sending the update request. Unfortunately, some rule types were not initially documented, and when documentation for them was added to the Administrator Reference Manual (ARM) in change #3112, the language that was added to the ARM at that time incorrectly described the behavior of two rule types, krb5-subdomain and ms-subdomain. This incorrect documentation could mi

    • Actualiza a 9.11.5-r0
    Publicación Actualización
  8. ALPINE-CVE-2018-5740

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2018-5740

    "deny-answer-aliases" is a little-used feature intended to help recursive server operators protect end users against DNS rebinding attacks, a potential method of circumventing the security model used by client browsers. However, a defect in this feature makes it easy, when the feature is in use, to experience an assertion failure in name.c. Affects BIND 9.7.0->9.8.8, 9.9.0->9.9.13, 9.10.0->9.10.8, 9.11.0->9.11.4, 9.12.0->9.12.2, 9.13.0->9.13.2.

    • Actualiza a 9.11.4_p1-r0
    Publicación Actualización
  9. ALPINE-CVE-2018-5738

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2018-5738

    Change #4777 (introduced in October 2017) introduced an unforeseen issue in releases which were issued after that date, affecting which clients are permitted to make recursive queries to a BIND nameserver. The intended (and documented) behavior is that if an operator has not specified a value for the "allow-recursion" setting, it SHOULD default to one of the following: none, if "recursion no;" is set in named.conf; a value inherited from the "allow-query-cache" or "allow-query" settings IF "recursion yes;" (the default for that setting) AND match lists are explicitly set for "allow-query-cache" or "allow-query" (see the BIND9 Administrative R

    • Actualiza a 9.11.5_p4-r0
    Publicación Actualización
  10. ALPINE-CVE-2017-3145

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2017-3145

    BIND was improperly sequencing cleanup operations on upstream recursion fetch contexts, leading in some cases to a use-after-free error that can trigger an assertion failure and crash in named. Affects BIND 9.0.0 to 9.8.x, 9.9.0 to 9.9.11, 9.10.0 to 9.10.6, 9.11.0 to 9.11.2, 9.9.3-S1 to 9.9.11-S1, 9.10.5-S1 to 9.10.6-S1, 9.12.0a1 to 9.12.0rc1.

    • Actualiza a 9.11.2_p1-r0
    Publicación Actualización
  11. ALPINE-CVE-2017-3143

    Media · CVSS 5.9Corrección disponible

    ALPINE-CVE-2017-3143

    An attacker who is able to send and receive messages to an authoritative DNS server and who has knowledge of a valid TSIG key name for the zone and service being targeted may be able to manipulate BIND into accepting an unauthorized dynamic update. Affects BIND 9.4.0->9.8.8, 9.9.0->9.9.10-P1, 9.10.0->9.10.5-P1, 9.11.0->9.11.1-P1, 9.9.3-S1->9.9.10-S2, 9.10.5-S1->9.10.5-S2.

    • Actualiza a 9.11.3-r0
    Publicación Actualización
  12. ALPINE-CVE-2017-3142

    Baja · CVSS 3.7Corrección disponible

    ALPINE-CVE-2017-3142

    An attacker who is able to send and receive messages to an authoritative DNS server and who has knowledge of a valid TSIG key name may be able to circumvent TSIG authentication of AXFR requests via a carefully constructed request packet. A server that relies solely on TSIG keys for protection with no other ACL protection could be manipulated into: providing an AXFR of a zone to an unauthorized recipient or accepting bogus NOTIFY packets. Affects BIND 9.4.0->9.8.8, 9.9.0->9.9.10-P1, 9.10.0->9.10.5-P1, 9.11.0->9.11.1-P1, 9.9.3-S1->9.9.10-S2, 9.10.5-S1->9.10.5-S2.

    • Actualiza a 9.11.3-r0
    Publicación Actualización
  13. ALPINE-CVE-2017-3141

    Alta · CVSS 7.8Corrección disponible

    ALPINE-CVE-2017-3141

    The BIND installer on Windows uses an unquoted service path which can enable a local user to achieve privilege escalation if the host file system permissions allow this. Affects BIND 9.2.6-P2->9.2.9, 9.3.2-P1->9.3.6, 9.4.0->9.8.8, 9.9.0->9.9.10, 9.10.0->9.10.5, 9.11.0->9.11.1, 9.9.3-S1->9.9.10-S1, 9.10.5-S1.

    • Actualiza a 9.11.3-r0
    Publicación Actualización
  14. ALPINE-CVE-2017-3140

    Media · CVSS 5.9Corrección disponible

    ALPINE-CVE-2017-3140

    If named is configured to use Response Policy Zones (RPZ) an error processing some rule types can lead to a condition where BIND will endlessly loop while handling a query. Affects BIND 9.9.10, 9.10.5, 9.11.0->9.11.1, 9.9.10-S1, 9.10.5-S1.

    • Actualiza a 9.11.3-r0
    Publicación Actualización
  15. ALPINE-CVE-2017-3138

    Media · CVSS 5.3Corrección disponible

    ALPINE-CVE-2017-3138

    named contains a feature which allows operators to issue commands to a running server by communicating with the server process over a control channel, using a utility program such as rndc. A regression introduced in a recent feature change has created a situation under which some versions of named can be caused to exit with a REQUIRE assertion failure if they are sent a null command string. Affects BIND 9.9.9->9.9.9-P7, 9.9.10b1->9.9.10rc2, 9.10.4->9.10.4-P7, 9.10.5b1->9.10.5rc2, 9.11.0->9.11.0-P4, 9.11.1b1->9.11.1rc2, 9.9.9-S1->9.9.9-S9.

    • Actualiza a 9.11.0_p5-r0
    Publicación Actualización
  16. ALPINE-CVE-2017-3137

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2017-3137

    Mistaken assumptions about the ordering of records in the answer section of a response containing CNAME or DNAME resource records could lead to a situation in which named would exit with an assertion failure when processing a response in which records occurred in an unusual order. Affects BIND 9.9.9-P6, 9.9.10b1->9.9.10rc1, 9.10.4-P6, 9.10.5b1->9.10.5rc1, 9.11.0-P3, 9.11.1b1->9.11.1rc1, and 9.9.9-S8.

    • Actualiza a 9.11.0_p5-r0
    Publicación Actualización
  17. ALPINE-CVE-2017-3136

    Media · CVSS 5.9Corrección disponible

    ALPINE-CVE-2017-3136

    A query with a specific set of characteristics could cause a server using DNS64 to encounter an assertion failure and terminate. An attacker could deliberately construct a query, enabling denial-of-service against a server if it was configured to use the DNS64 feature and other preconditions were met. Affects BIND 9.8.0 -> 9.8.8-P1, 9.9.0 -> 9.9.9-P6, 9.9.10b1->9.9.10rc1, 9.10.0 -> 9.10.4-P6, 9.10.5b1->9.10.5rc1, 9.11.0 -> 9.11.0-P3, 9.11.1b1->9.11.1rc1, 9.9.3-S1 -> 9.9.9-S8.

    • Actualiza a 9.11.0_p5-r0
    Publicación Actualización
  18. ALPINE-CVE-2016-9444

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2016-9444

    named in ISC BIND 9.x before 9.9.9-P5, 9.10.x before 9.10.4-P5, and 9.11.x before 9.11.0-P2 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a crafted DS resource record in an answer.

    • Actualiza a 9.10.4_p5-r0
    Publicación Actualización
  19. ALPINE-CVE-2016-9147

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2016-9147

    named in ISC BIND 9.9.9-P4, 9.9.9-S6, 9.10.4-P4, and 9.11.0-P1 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a response containing an inconsistency among the DNSSEC-related RRsets.

    • Actualiza a 9.10.4_p5-r0
    Publicación Actualización
  20. ALPINE-CVE-2016-9131

    Alta · CVSS 7.5Corrección disponible

    ALPINE-CVE-2016-9131

    named in ISC BIND 9.x before 9.9.9-P5, 9.10.x before 9.10.4-P5, and 9.11.x before 9.11.0-P2 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a malformed response to an RTYPE ANY query.

    • Actualiza a 9.10.4_p5-r0
    Publicación Actualización

Comprueba tu servidor

Compara tu pila y las versiones instaladas con las bases actuales de vulnerabilidades.

Comprueba tu servidor →