Vulnerabilidades de linux · Página 67

null_blk: register configfs subsystem after creating default devices

In the Linux kernel, the following vulnerability has been resolved: null_blk: register configfs subsystem after creating default devices In null_init(), configfs_register_subsystem() currently runs before register_blkdev(), so when null_blk is built as a module, a racing mkdir() + poweron from userspace can reach null_add_dev() while null_major is still 0. __add_disk() then hits WARN_ON(disk->minors) (major=0 with minors!=0) and fails: [root@fedora ~]# [ 2366.521436] WARNING: block/genhd.c:476 at __add_disk+0x8a7/0xde0, [ 2366.523552] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib [ 2366.529081] CPU: 26 UID:

• Actualiza a 6.1.190-1

null_blk: free global tag_set on init error path

In the Linux kernel, the following vulnerability has been resolved: null_blk: free global tag_set on init error path If shared_tags is enabled, null_setup_tagset() allocates the global tag_set via null_init_global_tag_set(). If device creation later fails, err_dev destroys the default devices and calls unregister_blkdev(), but never frees the global tag_set. Since module init failed, null_exit() is never invoked, so the global tag_set's tags and maps are permanently leaked. Free the global tag_set in err_dev, matching null_exit() which does if (tag_set.ops) blk_mq_free_tag_set(&tag_set).

• Actualiza a 6.1.190-1

null_blk: free zones array on device power-off

In the Linux kernel, the following vulnerability has been resolved: null_blk: free zones array on device power-off null_init_zoned_dev() allocates dev->zones when a zoned device is powered on, but null_del_dev() never frees it on power-off; dev->zones is only freed later in null_free_dev(), when the configfs directory is removed. If the device is powered off and then on again, null_init_zoned_dev() allocates a new array and overwrites the dev->zones pointer, leaking the previous allocation each power cycle. Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it. And calling null_free_zoned_dev() in null_free_dev() is no lo

null_blk: reject per-device queue resize for shared tag set

In the Linux kernel, the following vulnerability has been resolved: null_blk: reject per-device queue resize for shared tag set When shared_tags is enabled, null_setup_tagset() makes the device use the global tag_set, whose driver_data stays NULL. null_map_queues() therefore falls back to the module-wide g_submit_queues/g_poll_queues instead of any per-device value. Resizing submit_queues or poll_queues via configfs on such a device calls blk_mq_update_nr_hw_queues() on the shared set, shrinking set->nr_hw_queues. __blk_mq_realloc_hw_ctxs() only grows the q->queue_hw_ctx[] allocation, so on shrink it merely exits and NULLs the now-excess

• Actualiza a 6.1.190-1

null_blk: serialize configfs attribute stores with the lock

In the Linux kernel, the following vulnerability has been resolved: null_blk: serialize configfs attribute stores with the lock The NULLB_DEVICE_ATTR _store takes no lock: apply_fn attributes (submit_queues, poll_queues) get dev->NAME written again after apply_fn returns, outside its lock; APPLY=NULL attributes are entirely lockless. configfs only serializes stores per-open-file, so concurrent stores on separate fds race. For apply_fn attributes, once one store's apply_fn has reconfigured the hardware, a second (losing) store can still overwrite dev->NAME afterwards. This leaves dev->submit_queues out of sync with the live queue count, whi

• Actualiza a 6.1.190-1

null_blk: serialize configfs attribute updates with device setup

In the Linux kernel, the following vulnerability has been resolved: null_blk: serialize configfs attribute updates with device setup The attribute store methods generated with NULLB_DEVICE_ATTR() refuse to change the configuration of a live device by testing NULLB_DEV_FL_CONFIGURED, but that flag is only set by nullb_device_power_store() after null_add_dev() has returned, and the store methods take no lock at all. configfs only serializes writes to the same open file (buffer->mutex), so a write to any attribute can run concurrently with null_add_dev() and change the device configuration while it is being used. null_add_dev() reads the conf

• Actualiza a 6.1.190-1

blk-iolatency: clear delay state when freeing policy data

In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: clear delay state when freeing policy data io.latency can throttle a group which has no latency target of its own. When a sibling misses its target, check_scale_change() scales down its peers, and a peer that reaches queue depth one gets blkcg_use_delay() called on it on every further scale-down, even with min_lat_nsec == 0. iolatency_pd_offline() resets the target through iolatency_set_min_lat_nsec(), which clears the delay only on a nonzero to zero transition, so it never clears such a peer. Freeing the policy data then leaves blkg->use_delay set and blkc

blk-iocost: clear delay state when freeing policy data

In the Linux kernel, the following vulnerability has been resolved: blk-iocost: clear delay state when freeing policy data iocg_kick_delay() turns sufficiently large debt into an explicit block-cgroup delay with blkcg_set_delay(), setting blkg->use_delay to -1 and incrementing blkcg->congestion_count. Clearing it again depends on iocg_kick_delay() running from the period timer, the waitq timer or the issue path. ioc_pd_free() removes the iocg from active_iocgs and cancels its waitq timer, and no further bios can arrive, so once it has run nothing is left which can reduce the debt and clear the delay. The blkcg stays marked congested for

block: mtip32xx: synchronize ioctls with device removal

In the Linux kernel, the following vulnerability has been resolved: block: mtip32xx: synchronize ioctls with device removal The ioctl handlers only test REMOVE_PENDING before entering mtip_hw_ioctl(). Removal can set that bit immediately afterwards and free dd->port in mtip_hw_exit() while an ioctl still dereferences it. An already open block device can reach the handlers while del_gendisk() is in progress. Serialize both native and compat ioctls with removal. Set REMOVE_PENDING before taking the mutex so new callers fail after an in-flight ioctl has drained, and hold the mutex until the port has been torn down.

• Actualiza a 6.1.190-1

apparmor: fix deadlock in complain-mode change_hat

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix deadlock in complain-mode change_hat The use of change_hat when in complain mode can cause a deadlock when the hat doesn't exist and a new learning profile is created for the missing profile. This is because change_hat() has taken the lock to search the hat list and creating the new learning profile needs to take the lock to add it to the list. From the bug report: Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su in complain mode set to change hats. Then verified in newest available vanilla kernel I've compiled to see if still present:

ksmbd: Do not skip lock checks for single-byte ranges

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Do not skip lock checks for single-byte ranges check_lock_range() uses inclusive ranges. Its callers pass the end offset as start + length - 1, so start == end represents a valid single-byte range rather than an empty range. The start == end shortcut therefore skips mandatory byte-range lock checks for one-byte reads, writes, copychunk operations and one-byte truncate ranges. A conflicting lock covering that byte is not checked and the operation is allowed to proceed. Remove the shortcut. The truncate size == inode->i_size case is already handled by only calling ch

• Actualiza a 6.1.190-1

ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user() ksmbd_alloc_user() copies resp->hash_sz bytes out of the mountd IPC login response with user->passkey_sz = resp->hash_sz; user->passkey = kmalloc(resp->hash_sz, KSMBD_DEFAULT_GFP); if (user->passkey) memcpy(user->passkey, resp->hash, resp->hash_sz); resp->hash_sz is a __u16 supplied by the response, but resp->hash[] is only KSMBD_REQ_MAX_HASH_SZ bytes. A malformed or malicious login response can set hash_sz well beyond that (up to 65535), so the memcpy() reads past the end of the response object. ipc_validate

ksmbd: free preauth sessions on connection teardown

In the Linux kernel, the following vulnerability has been resolved: ksmbd: free preauth sessions on connection teardown SMB3.1.1 multichannel binding preserves the preauthentication hash in a preauth_session between the NTLM negotiate and authenticate requests. The binding NTLM negotiate allocates this object and returns STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends the authenticate request, neither the authenticate nor error cleanup paths free the object. Release any remaining preauthentication sessions when tearing down the connection. Initialize the list when allocating the connection so that this cleanup is

ksmbd: serialize oplock close with pending break ownership

In the Linux kernel, the following vulnerability has been resolved: ksmbd: serialize oplock close with pending break ownership close may abort an in-flight oplock break while another breaker already holds an opinfo reference. Releasing pending_break wakes that waiter, but without serializing the close transition with bit acquisition it can become a new break owner through the test_and_set_bit() fast path. It can then overwrite OPLOCK_CLOSING with OPLOCK_ACK_WAIT and continue a break for a dying opinfo. Make OPLOCK_CLOSING terminal once the opinfo is removed from the inode list. Serialize that transition, pending_break acquisition, and OPLO

smb/server: fix null-ptr-deref in ksmbd_ipc_tree_connect_request()

In the Linux kernel, the following vulnerability has been resolved: smb/server: fix null-ptr-deref in ksmbd_ipc_tree_connect_request() See the procedure below: ksmbd_tree_conn_connect ksmbd_share_config_get share->name = kstrdup() // fail if (!test_share_config_flag(share, KSMBD_SHARE_FLAG_PIPE)) // false // do not check `share->name` ksmbd_ipc_tree_connect_request strlen(share->name) // null-ptr-deref

ksmbd: defer publishing granted locks to prevent UAF/double-free race

In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer publishing granted locks to prevent UAF/double-free race In smb2_lock(), mid-batch granted locks are published to connection-wide (conn->lock_list) and file-wide (fp->lock_list) lists immediately upon vfs_lock_file() success, while also remaining tracked on the stack-local rollback_list. If a subsequent element in the same SMB2_LOCK request array fails validation or execution, the thread jumps to out: and walks rollback_list to undo previously granted locks. However, because the granted lock was already published to conn->lock_list, a concurrent UNLOCK request

erofs: fix interlaced ztailpacking pclusters

In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced ztailpacking pclusters On-disk sizes of interlaced pclusters should be block-aligned, and ztailpacking interlaced pclusters should be invalid at all. Currently, mkfs.erofs won't generate any interlaced pcluster with ztailpacking enabled, so this doesn't affect any existing valid filesystems. However, crafted images can contain invalid interlaced ztailpacking pclusters, resulting in an out-of-bounds read from a kmap'd page and copying irrelevant kernel memory into userspace-visible page cache.

lwt_bpf: Restore reserved headroom after xmit program

In the Linux kernel, the following vulnerability has been resolved: lwt_bpf: Restore reserved headroom after xmit program ip_finish_output2() expands an skb to LL_RESERVED_SPACE(dev) before LWT xmit. An LWT_XMIT BPF program can then modify the skb head and still return BPF_OK, so bpf_xmit() rechecks the remaining headroom before the skb continues to neighbour output. That recheck uses dst->dev->hard_header_len. This is not enough for the neighbour cached-header path: neigh_hh_output() copies the cached hardware header using the aligned hh_cache size, HH_DATA_MOD for short headers or HH_DATA_ALIGN(hh_len) otherwise. On Ethernet, hard_heade

• Actualiza a 6.1.190-1

bpf: Reject negative optlen in cgroup getsockopt hook

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative optlen in cgroup getsockopt hook A cgroup getsockopt BPF program can shrink ctx->optlen after the kernel getsockopt handler has run. The kernel-buffer variant, used by TCP_ZEROCOPY_RECEIVE, only rejects values larger than the original length. If BPF writes a negative optlen, that value is accepted and propagated back to the TCP getsockopt code. It can then be passed to copy_to_sockptr() as a size_t and trigger the hardened usercopy bytes > INT_MAX warning. Reject negative ctx.optlen in __cgroup_bpf_run_filter_getsockopt_kern(), matching the lower-boun

• Actualiza a 6.1.190-1

ksmbd: safely discard unregistered deferred locks

In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper.