Vulnerabilidades de linux · Página 68

ksmbd: detach blocked lock requests before freeing

In the Linux kernel, the following vulnerability has been resolved: ksmbd: detach blocked lock requests before freeing A file_lock retained by ksmbd for byte-range lock bookkeeping can still be part of the VFS blocked-request graph. In particular, the VFS can chain a new waiter below an already blocked request through flc_blocked_requests. The ksmbd_file reference count does not cover that graph. Both __ksmbd_close_fd() and the cross-request unlock path free these retained file_lock objects directly. If a dependent waiter is still attached, locks_release_private() hits BUG_ON(!list_empty(&flc->flc_blocked_requests)). The same lifetime mism

ksmbd: scope session state changes to bound connections

In the Linux kernel, the following vulnerability has been resolved: ksmbd: scope session state changes to bound connections ksmbd_all_conn_set_status() treats every connection whose transient binding flag is set as belonging to the target SessionId. A logoff or session replacement can consequently move an unrelated connection to NEED_RECONNECT or NEED_SETUP. Pass the target session itself and select connections using either the connection-local session xarray or the session's permanent channel list. Use the same association test while waiting for requests to drain. Serialize session-wide status changes under request_lock and do not overw

ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size

In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size smb_check_perm_dacl() validates that the DACL fits inside the NT security descriptor, but then bounds its two ACE walks by the remaining NTSD length (acl_size) rather than the DACL's declared size (pdacl_size). When pdacl->size is smaller than the trailing NTSD buffer, bytes after the declared DACL boundary - still inside the stored security descriptor - are parsed as ACEs during access checks. A crafted DACL can place an access-granting ACE beyond pdacl->size, and the current code accepts it during SMB2_CREATE acc

smb/server: fix session leak in ksmbd_session_register()

In the Linux kernel, the following vulnerability has been resolved: smb/server: fix session leak in ksmbd_session_register() See the procedure below: smb2_sess_setup ksmbd_smb2_session_create __session_create atomic_set(&sess->refcnt, 2) hash_add(sessions_table, &sess->hlist, sess->id) ksmbd_session_register xa_store(&conn->sessions, sess->id, sess) // fail ksmbd_user_session_put atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed Remove the session from sessions_table and drop its table reference if xa_store() fails.

NFSv4: remove callback IDR entry on client allocation failure

In the Linux kernel, the following vulnerability has been resolved: NFSv4: remove callback IDR entry on client allocation failure nfs4_alloc_client() allocates an NFSv4.0 callback identifier before it finishes setting up the client. If any later initialization step fails, the error path frees the nfs_client directly with nfs_free_client(). That bypasses nfs_put_client(), which is where the callback IDR entry is removed during normal teardown. A failed allocation can therefore leave cb_ident_idr pointing at a freed nfs_client. A later NFSv4.0 callback lookup by cb_ident would find the stale pointer and take a reference to it. Make the call

• Actualiza a 6.1.190-1

pnfs/blocklayout: Fix device leaks on parse failure

In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Fix device leaks on parse failure bl_parse_concat() and bl_parse_stripe() allocate a child device array and then parse each child in turn. If parsing a child fails, the failed child is not counted in nr_children and the parent may be left with a children array that bl_free_device() will not release when nr_children is zero. Release the failed child and the already parsed children before returning the error. Also make bl_free_device() release the child array whenever the children pointer is set, so that partially initialised concat or stripe devices are

NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers

In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so I/O to a v4.0 flexfiles DS oopses: - nfs4_init_ds_session() dereferences clp->cl_session->session_state while seeding the DS lease. It also only seeds cl_lease_time when NFS4_SESSION_INITING is set; without a session that never happens, so cl_lease_time stays 0 and nfs4_renew_state() b

NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease()

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease() When nfs4_add_lease() races with a delegation return, it calls nfs4_delete_lease() to clean up. Previously, it passed priv, which can legitimately be NULL. Passing a NULL priv eventually leads to a NULL pointer dereference in generic_setlease().

bpf, xdp: move offload check into dev_xdp_install()

In the Linux kernel, the following vulnerability has been resolved: bpf, xdp: move offload check into dev_xdp_install() bpf_xdp_link_update() calls dev_xdp_install() directly and skips dev_xdp_attach(), so the checks in dev_xdp_attach() do not run. A user can make an XDP link with a normal program and then swap in an offloaded or device-bound program with BPF_LINK_UPDATE, which puts it on the software path. dev_xdp_install() is the one place all three paths go through: "ip link set xdp" and BPF_LINK_CREATE reach it via dev_xdp_attach(), and BPF_LINK_UPDATE calls it directly. So move the program checks (offloaded, bound to another device, d

net: kcm: Hold RCU read lock while running BPF parser

In the Linux kernel, the following vulnerability has been resolved: net: kcm: Hold RCU read lock while running BPF parser kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which prevents CPU migration, but does not establish an RCU read-side critical section. Consequently, BPF map operations can trigger WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser program. Hold the RCU read lock while running the program.

• Actualiza a 6.1.190-1

ipvs: fix integer overflow in ftp helper port/address parsing

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix integer overflow in ftp helper port/address parsing ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16 (hport) and into unsigned char (p[]) without checking for overflow. A crafted FTP PASV/EPSV response with an over-long port or address octet wraps the value, so the helper configures the data connection with a truncated port/address. The netfilter conntrack FTP helper had the same defect, fixed in commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16 overflows"). Apply the equivalent fix here: widen the port accumulator to u32 and reject val

• Actualiza a 6.1.190-1

cuse: wait for pending RCU callbacks on module exit

In the Linux kernel, the following vulnerability has been resolved: cuse: wait for pending RCU callbacks on module exit Since commit 053fc4f755ad ("fuse: fix UAF in rcu pathwalks"), fuse_conn_put() frees the fuse_conn through call_rcu() rather than synchronously. For cuse, fc->release is cuse_fc_release(), which lives in the cuse module. If the module is removed before the RCU grace period ends, the callback jumps into freed module memory: userspace / module unload | RCU softirq ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ close(/dev/cuse) | cuse_channel_release()

• Actualiza a 6.1.190-1

fuse: check for NULL root inode in fuse_fill_super_submount

In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL when its inode allocation fails, but fuse_fill_super_submount() passed the result straight to get_fuse_inode() and decremented fi->nlookup without checking it: root = fuse_iget(sb, parent_fi->nodeid, ...); fi = get_fuse_inode(root); fi->nlookup--; Inside fuse_iget() the inode allocation can fail and return NULL. The submount root takes the iget5_locked() path, whose alloc_inode() can fail under memory pressure (the auto-submount branch can fail the same way in

vsock: don't check the listener's sk_err in vsock_accept()

In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO

net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()

In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/* causes use-afer-free crash when either alloc_percpu() or dev_addr_init() in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure") added ref_tracker_dir_exit() to only free_netdev() path.

vdpa/mlx5: fix wrong list iterated in add_direct_chain error path

In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: fix wrong list iterated in add_direct_chain error path In add_direct_chain(), newly allocated direct MR entries are added to the local list 'tmp', which is spliced into mr->head only on success. On the error path, the cleanup loop was incorrectly iterating over mr->head instead of tmp. Fix by iterating over 'tmp' in the err_alloc cleanup path.

• Actualiza a 6.1.190-1

rtc: pcf8563: fix clock provider leak on unbind

In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers the CLKOUT clock provider with of_clk_add_provider(), but nothing ever unwinds it: there is no of_clk_del_provider() call and the driver has no remove callback. Each of_clk_add_provider() allocates a struct of_clk_provider, takes a reference on the OF node and adds an entry to the global of_clk_providers list, none of which is released when the device is unbound. Every bind/unbind (or module reload) therefore leaks a provider structure and an of_node reference. The clock itself is alrea

• Actualiza a 6.1.190-1

smb: client: fix request buffer leak in smb2_new_read_req()

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix request buffer leak in smb2_new_read_req() smb2_new_read_req() allocates the request buffer with smb2_plain_req_init() but only publishes it to the caller with *buf = req at the very end of the function. Two error returns sit in between: rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server, (void **) &req, total_len); if (rc) return rc; if (server == NULL) return -ECONNABORTED; [...] rdata->mr = smbd_register_mr(server->smbd_conn, &rdata->subreq.io_iter, true, need_invalidate); if (!rdata->mr) return -EAGAIN;

irqchip/renesas-rzg2l: Fix loss of interrupt

In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-rzg2l: Fix loss of interrupt rzg2l_clear_irq_int() and rzg2l_clear_tint_int() perform a read-modify-write on the ISCR/TSCR status registers to clear the bit for the interrupt just handled. Since these registers are write-0-to-clear per bit, this is racy: If another interrupt's status bit gets set between the read and the write, that bit is written back as 0 by the software-constructed value, clearing an interrupt that hasn't been serviced yet and losing it. This can be reproduced by triggering multiple interrupts at once, e.g.: gpioset -c gpiochip0 355=

• Actualiza a 6.1.190-1

clk: visconti: Make sure clk_init_data is fully initialized

In the Linux kernel, the following vulnerability has been resolved: clk: visconti: Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. visconti_clk_register_gate() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter in uninitialized, and thus may cause a c

• Actualiza a 6.1.190-1