Vulnerabilidades de la pila Python · Página 182

Ansible-core: unsafe tagging bypass via hostvars object in ansible-core

A flaw was found in Ansible-Core. This vulnerability allows attackers to bypass unsafe content protections using the hostvars object to reference and execute templated content. This issue can lead to arbitrary code execution if remote data or module outputs are improperly templated within playbooks.

• Actualiza a 2.14.18-0+deb12u1
• Actualiza a 2.16.14rc1
• Actualiza a 2.17.7rc1
• Actualiza a 2.18.0-2
• Actualiza a 2.18.1rc1
• Actualiza a 5.4.0-1

RMAC revert to the beginning of the session in libosdp

libosdp is an implementation of IEC 60839-11-5 OSDP (Open Supervised Device Protocol) and provides a C library with support for C++, Rust and Python3. In affected versions an unexpected `REPLY_CCRYPT` or `REPLY_RMAC_I` may be introduced into an active stream when they should not be. Once RMAC_I message can be sent during a session, attacker with MITM access to the communication may intercept the original RMAC_I reply and save it. While the session continues, the attacker will record all of the replies and save them, till capturing the message to be replied (can be detected by ID, length or time based on inspection of visual activity next to t

• Actualiza a 3.0.0

Apache Airflow: Secrets not masked in UI when sensitive variables are set via Airflow cli

Airflow versions before 2.10.3 have a vulnerability that allows authenticated users with audit log access to see sensitive values in audit logs which they should not see. When sensitive variables were set via airflow CLI, values of those variables appeared in the audit log and were stored unencrypted in the Airflow database. While this risk is limited to users with audit log access, it is recommended to upgrade to Airflow 2.10.3 or a later version, which addresses this issue. Users who previously used the CLI to set secret variables should manually delete entries with those variables from the log table.

• Actualiza a 2.10.3

CVE-2024-27530

wasm3 139076a contains a Use-After-Free in ForEachModule.

CVE-2024-27529

wasm3 139076a contains memory leaks in Read_utf8.

CVE-2024-27528

wasm3 139076a suffers from Invalid Memory Read, leading to DoS and potential Code Execution.

CVE-2024-27527

wasm3 139076a is vulnerable to Denial of Service (DoS).

Path traversal using file URI scheme without supplying hostname in changedetection.io

changedetection.io is a free open source web page change detection tool. The validation for the file URI scheme falls short, and results in an attacker being able to read any file on the system. This issue only affects instances with a webdriver enabled, and `ALLOW_FILE_URI` false or not defined. The check used for URL protocol, `is_safe_url`, allows `file:` as a URL scheme. It later checks if local files are permitted, but one of the preconditions for the check is that the URL starts with `file://`. The issue comes with the fact that the file URI scheme is not required to have double slashes. This issue has been addressed in version 0.47.06

• Actualiza a 0.47.6

Arbitrary file read with File and UploadButton components in Gradio

Gradio is an open-source Python package designed to enable quick builds of a demo or web application. If File or UploadButton components are used as a part of Gradio application to preview file content, an attacker with access to the application might abuse these components to read arbitrary files from the application server. This issue has been addressed in release version 5.5.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

• Actualiza a 5.5.0

CVE-2024-10082

CodeChecker is an analyzer tooling, defect database and viewer extension for the Clang Static Analyzer and Clang Tidy. Authentication method confusion allows logging in as the built-in root user from an external service. The built-in root user up until 6.24.1 is generated in a weak manner, cannot be disabled, and has universal access.This vulnerability allows an attacker who can create an account on an enabled external authentication service, to log in as the root user, and access and control everything that can be controlled via the web interface. The attacker needs to acquire the username of the root user to be successful. This issue affe

• Actualiza a 6.24.2

CVE-2024-10081

CodeChecker is an analyzer tooling, defect database and viewer extension for the Clang Static Analyzer and Clang Tidy. Authentication bypass occurs when the API URL ends with Authentication. This bypass allows superuser access to all API endpoints other than Authentication. These endpoints include the ability to add, edit, and remove products, among others. All endpoints, apart from the /Authentication is affected by the vulnerability. This issue affects CodeChecker: through 6.24.1.

• Actualiza a 6.24.2

Ansible-core: ansible-core user may read/write unauthorized content

A flaw was found in Ansible. The ansible-core `user` module can allow an unprivileged user to silently create or replace the contents of any file on any system path and take ownership of it when a privileged user executes the `user` module against the unprivileged user's home directory. If the unprivileged user has traversal permissions on the directory containing the exploited target file, they retain full control over the contents of the file as its owner.

• Actualiza a 2.14.18-0+deb12u1
• Actualiza a 2.14.18rc1
• Actualiza a 2.15.13rc1
• Actualiza a 2.16.13rc1
• Actualiza a 2.17.6rc1
• Actualiza a 2.18.0-1
• Actualiza a 2.18.0rc2
• Actualiza a 5.4.0-1

Jinja2 Templates are vulnerable to XSS attacks due to their configuration in OctoPrint

OctoPrint provides a web interface for controlling consumer 3D printers. OctoPrint versions up until and including 1.10.2 contain reflected XSS vulnerabilities in the login dialog and the standalone application key confirmation dialog. An attacker who successfully talked a victim into clicking on a specially crafted login link, or a malicious app running on a victim's computer triggering the application key workflow with specially crafted parameters and then redirecting the victim to the related standalone confirmation dialog could use this to retrieve or modify sensitive configuration settings, interrupt prints or otherwise interact with th

• Actualiza a 1.10.3

API key access in settings without reauthentication in OctoPrint

OctoPrint provides a web interface for controlling consumer 3D printers. OctoPrint versions up until and including 1.10.2 contain a vulnerability that allows an attacker that has gained temporary control over an authenticated victim's OctoPrint browser session to retrieve/recreate/delete the user's or - if the victim has admin permissions - the global API key without having to reauthenticate by re-entering the user account's password. An attacker could use a stolen API key to access OctoPrint through its API, or disrupt workflows depending on the API key they deleted. This vulnerability will be patched in version 1.10.3 and all users are advi

• Actualiza a 1.10.3

User data deletion by anoynmous users in Zope

Zope AccessControl provides a general security framework for use in Zope. In affected versions anonymous users can delete the user data maintained by an `AccessControl.userfolder.UserFolder` which may prevent any privileged access. This problem has been fixed in version 7.2. Users are advised to upgrade. Users unable to upgrade may address the issue by adding `data__roles__ = ()` to `AccessControl.userfolder.UserFolder`.

• Actualiza a 5.11.1
• Actualiza a 7.2

CVE-2024-48061

langflow <=1.0.18 is vulnerable to Remote Code Execution (RCE) as any component provided the code functionality and the components run on the local machine rather than in a sandbox.

CVE-2024-48052

In gradio <=4.42.0, the gr.DownloadButton function has a hidden server-side request forgery (SSRF) vulnerability. The reason is that within the save_url_to_cache function, there are no restrictions on the URL, which allows access to local target resources. This can lead to the download of local resources and sensitive information.

CVE-2024-48050

In agentscope <=v0.0.4, the file agentscope\web\workstation\workflow_utils.py has the function is_callable_expression. Within this function, the line result = eval(s) poses a security risk as it can directly execute user-provided commands.

• Actualiza a 0.0.5a1

changedetection.io Path Traversal vulnerability

changedetection.io is free, open source web page change detection software. Prior to version 0.47.5, when a WebDriver is used to fetch files, `source:file:///etc/passwd` can be used to retrieve local system files, where the more traditional `file:///etc/passwd` gets blocked. Version 0.47.5 fixes the issue.

• Actualiza a 0.47.5

CVE-2024-42835

langflow v1.0.12 was discovered to contain a remote code execution (RCE) vulnerability via the PythonCodeTool component.