Vulnerabilidades de linux-oem-7.0 · Página 191

sctp: fix err_chunk memory leaks in INIT handling

In the Linux kernel, the following vulnerability has been resolved: sctp: fix err_chunk memory leaks in INIT handling When sctp_verify_init() encounters unrecognized parameters, it allocates an err_chunk to report them. However, this chunk is leaked in several code paths: 1. In sctp_sf_do_5_1B_init(), if security_sctp_assoc_request() fails after sctp_verify_init() has populated err_chunk, the function returns immediately without freeing it. 2. In sctp_sf_do_unexpected_init(), the same leak occurs on the security_sctp_assoc_request() failure path. 3. In sctp_sf_do_unexpected_init(), on the success path after copying unrecogniz

• Actualiza a 7.0.0-1015.15

s390/mm: Fix handling of _PAGE_UNUSED pte bit

In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix handling of _PAGE_UNUSED pte bit The _PAGE_UNUSED softbit should not really be lying around. Its sole purpose is to signal to try_to_unmap_one() and try_to_migrate_one() that the page can be discarded instead of being moved / swapped. KVM has no way to know why a page is being unmapped, so it sets the bit on userspace ptes corresponding to unused guest pages every time they get unmapped. KVM has no reasonable way to clear the bit once the page is in use again. While set_ptes() checks and clears the bit, other paths that set new ptes did not. This led to used

• Actualiza a 7.0.0-1014.14

octeontx2-af: Validate NIX maximum LFs correctly

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Validate NIX maximum LFs correctly NIX maximum number of LFs can be set via devlink command but that can be done before assigning any LFs to a PF/VF. The condition used to check whether any LFs are assigned is incorrect. This patch fixes that condition.

• Actualiza a 7.0.0-1015.15

net: mvneta: re-enable percpu interrupt on resume

In the Linux kernel, the following vulnerability has been resolved: net: mvneta: re-enable percpu interrupt on resume On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules NAPI poll, which calls enable_percpu_irq() on completion to unmask. If suspend occurs while NAPI poll is pending (between disable_percpu_irq in the ISR and enable_percpu_irq in poll completion), the interrupt is never re-enabled: 1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule() => MPIC masked, percpu

• Actualiza a 7.0.0-1015.15

geneve: gate GRO hint in geneve_gro_complete() on gs->gro_hint

In the Linux kernel, the following vulnerability has been resolved: geneve: gate GRO hint in geneve_gro_complete() on gs->gro_hint geneve_gro_receive() reads the GRO hint through geneve_sk_gro_hint_off(), which honours it only when the socket enabled IFLA_GENEVE_GRO_HINT (gs->gro_hint). geneve_gro_complete() instead calls the low-level geneve_opt_gro_hint_off() and acts on the hint unconditionally. On a tunnel without the hint, receive aggregates the frames as plain ETH_P_TEB while complete still honours an attacker-supplied hint option: it inflates gh_len by gro_hint->nested_hdr_len (u8) and redirects the dispatch type, so the inner gro_c

• Actualiza a 7.0.0-1015.15

geneve: validate inner network offset in geneve_gro_complete()

In the Linux kernel, the following vulnerability has been resolved: geneve: validate inner network offset in geneve_gro_complete() Even with both paths gated on gs->gro_hint, geneve_gro_complete() re-derives the inner dispatch type and length from the packet and the current gs->gro_hint, independently of geneve_gro_receive(). The two can disagree if gs->gro_hint flips under a concurrent geneve_quiesce()/ geneve_unquiesce() (sk_user_data is NULL across a synchronize_net()), or if the re-read option bytes differ from the ones receive parsed. geneve_gro_receive() already records the inner network header position in NAPI_GRO_CB()->inner_networ

• Actualiza a 7.0.0-1015.15

net: sungem: fix probe error cleanup

In the Linux kernel, the following vulnerability has been resolved: net: sungem: fix probe error cleanup gem_init_one() calls gem_remove_one() when register_netdev() fails. gem_remove_one() unregisters and frees resources owned by the net_device, including the DMA block, MMIO mapping, PCI regions, and the net_device itself. gem_init_one() then falls through to its own cleanup labels and frees the same resources again. Keep the register_netdev() error path in gem_init_one(): clear drvdata so PM/remove paths do not see a half-registered device, remove the NAPI instance added during probe, and let the existing cleanup labels release the resou

• Actualiza a 7.0.0-1015.15

net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync

In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync Yue Sun reported a use-after-free and debugobjects warning in udp_tunnel_nic_device_sync_work() during concurrent device operations. The workqueue core clears the internal pending bit before invoking the worker. At that point, a concurrent thread can queue the work again. When the already running worker eventually clears the work_pending flag to 0, it mistakenly clears the flag for the newly queued instance. udp_tunnel_nic_unregister() then observes work_pending as 0 and frees the structure while the se

• Actualiza a 7.0.0-1015.15

tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy()

In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy() TIPC UDP media bearer teardown calls dst_cache_destroy() on its replicast caches before calling synchronize_net() to wait for concurrent RCU readers (transmitters) to finish: static void cleanup_bearer(struct work_struct *work) { ... list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) { dst_cache_destroy(&rcast->dst_cache); list_del_rcu(&rcast->list); kfree_rcu(rcast, rcu); } ... dst_cache_destroy(&ub->rcast.dst_cache); udp_tunnel_sock_release(ub->sk); synchronize_net(); ... } This i

ALSA: FCP: Fix NULL pointer dereference in interface lookup

In the Linux kernel, the following vulnerability has been resolved: ALSA: FCP: Fix NULL pointer dereference in interface lookup A malformed USB device can provide a vendor-specific interface without any endpoint descriptors. fcp_find_fc_interface() currently selects the first vendor-specific interface and reads endpoint 0 from it, without checking whether the interface actually has any endpoints. When bNumEndpoints is zero, no endpoint array is allocated for the parsed alternate setting, so get_endpoint(..., 0) yields an invalid endpoint descriptor pointer. Dereferencing it through usb_endpoint_num() then triggers a NULL pointer dereferenc

• Actualiza a 7.0.0-1015.15

bpf: Mask pseudo pointer values in verifier logs

In the Linux kernel, the following vulnerability has been resolved: bpf: Mask pseudo pointer values in verifier logs print_bpf_insn() masks ldimm64 immediates for pointer-bearing pseudo sources when pointer leaks are not allowed, but the mask only covers BPF_PSEUDO_MAP_FD and BPF_PSEUDO_MAP_VALUE. BPF_PSEUDO_MAP_IDX, BPF_PSEUDO_MAP_IDX_VALUE, and BPF_PSEUDO_BTF_ID can also be resolved to kernel pointer values before the verifier log prints the instruction. Include them in the existing pointer classification so the log prints 0x0 instead of the rewritten address.

• Actualiza a 7.0.0-1015.15

bpf: Fix insn_aux_data leak on verifier err_free_env path

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix insn_aux_data leak on verifier err_free_env path When bpf_check() allocates env->insn_aux_data successfully but later fails to allocate env->succ, it jumps directly to err_free_env. The existing vfree(env->insn_aux_data) sits before the err_free_env label, so that direct jump bypasses it and leaks insn_aux_data. Move vfree(env->insn_aux_data) into err_free_env so all early and late exit paths release it consistently.

• Actualiza a 7.0.0-1015.15

seg6: validate SRH length before reading fixed fields

In the Linux kernel, the following vulnerability has been resolved: seg6: validate SRH length before reading fixed fields seg6_validate_srh() reads fixed SRH fields such as srh->type and srh->hdrlen before checking that the supplied length covers the fixed struct ipv6_sr_hdr fields. The BPF SEG6 encap path reaches this with a BPF program-supplied pointer and length: bpf_lwt_push_encap() and the SEG6 local BPF END_B6 and END_B6_ENCAP actions call bpf_push_seg6_encap(), which forwards the length to seg6_validate_srh() with no minimum-size guard. A 2-byte SEG6 encap header can therefore make the validator read srh->type at offset 2 beyond th

• Actualiza a 7.0.0-1015.15

net: enetc: check the number of BDs needed for xdp_frame

In the Linux kernel, the following vulnerability has been resolved: net: enetc: check the number of BDs needed for xdp_frame The size of xdp_redirect_arr array is ENETC_MAX_SKB_FRAGS. However, the number of fragments contained in xdp_frame may be greater than or equal to ENETC_MAX_SKB_FRAGS, which will cause the access to xdp_redirect_arr to be out of bounds.

• Actualiza a 7.0.0-1014.14

sctp: add INIT verification after cookie unpacking

In the Linux kernel, the following vulnerability has been resolved: sctp: add INIT verification after cookie unpacking In SCTP handshake, the INIT chunk is initially processed by the server and embedded into the cookie carried in INIT-ACK. The client then returns this cookie via COOKIE-ECHO, where the server unpacks it and reconstructs the original INIT chunk. When cookie authentication is enabled, the cookie contents are protected against tampering, so reusing the unpacked INIT without re-verification is safe. However, when cookie authentication is disabled, the reconstructed INIT can no longer be trusted. In this case, the INIT must be

• Actualiza a 7.0.0-1014.14

hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid()

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid() pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the vrm_version configured by the driver, while pmbus_reg2data_vid() already switched on it. Any driver that selects a non-VR11 VID mode and exposes a regulator (or hwmon vout setter) sent dangerously wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the chip interprets as 1080 mV. Mirror pmbus_reg2data_vid() so writes round-trip with reads.

• Actualiza a 7.0.0-1015.15

hwmon: adm1275: Prevent reading uninitialized stack

In the Linux kernel, the following vulnerability has been resolved: hwmon: adm1275: Prevent reading uninitialized stack While adding support for the ROHM BD127X0 hot-swap controllers, sashiko reported an error in device-name comparison, which can lead to reading uninitialized stack memory. Quoting Sashiko: This is a pre-existing issue, but I noticed that just before this block in adm1275_probe(), there might be an out-of-bounds stack read: ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer); if (ret < 0) { ... } for (mid = adm1275_id; mid->name[0]; mid++) { if (!strncasecmp(mid->name, block_buff

• Actualiza a 7.0.0-1015.15

hwmon: (pmbus) Fix passing events to regulator core

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus) Fix passing events to regulator core Sashiko reports: Commit 754bd2b4a084 ("hwmon: (pmbus/core) Protect regulator operations with mutex") introduced a worker to batch regulator events over time using atomic_or(). The delayed worker then passes the combined bitmask unmodified to regulator_notifier_call_chain(). The core regulator subsystem's regulator_handle_critical() function evaluates the event parameter using a strict switch statement. If multiple distinct faults occur before the worker runs (e.g., REGULATOR_EVENT_UNDER_VOLTAGE | REGULATOR_EVENT_OVER_CUR

• Actualiza a 7.0.0-1015.15

hwmon: (aspeed-g6-pwm-tach) Guard fan RPM calculation against divide-by-zero

In the Linux kernel, the following vulnerability has been resolved: hwmon: (aspeed-g6-pwm-tach) Guard fan RPM calculation against divide-by-zero Sashiko reports: In the aspeed-g6-pwm-tacho driver, the aspeed_tach_val_to_rpm() function calculates the fan RPM using the tachometer value. However, it does not check if the tachometer value is zero before performing the division. If the hardware reports a tachometer value of 0 (which can happen due to an extremely fast pulse, a stuck edge, or a hardware glitch), the calculated tach_div evaluates to 0. The subsequent call to do_div() with tach_div as the divisor triggers a divide-by-zero excepti

• Actualiza a 7.0.0-1015.15

eth: fbnic: don't cache shinfo across skb realloc

In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: don't cache shinfo across skb realloc fbnic_tx_lso() calls skb_cow_head() which may reallocate the skb including the shared info. We can't use the pointer calculated before the call. BUG: KASAN: slab-use-after-free in fbnic_tx_lso.isra.0+0x668/0x8e0 Read of size 4 at addr ff110000262edd98 by task swapper/5/0 Call Trace: fbnic_tx_lso.isra.0+0x668/0x8e0 fbnic_xmit_frame+0x622/0xba0 dev_hard_start_xmit+0xf4/0x620 Allocated by task 8653: __alloc_skb+0x11e/0x5f0 alloc_skb_with_frags+0xcc/0x6c0 sock_alloc_send_pskb+0x327

• Actualiza a 7.0.0-1014.14