ata: libahci: clear PxCLBU and PxFBU for AHCI_HFLAG_32BIT_ONLY
In the Linux kernel, the following vulnerability has been resolved:
ata: libahci: clear PxCLBU and PxFBU for AHCI_HFLAG_32BIT_ONLY
A user reported that commit 105c42566a55 ("ata: ahci: force 32-bit DMA for
JMicron JMB582/JMB585") made the JMicron JMB585 unusable on his board.
The failure is seen as soon as the ahci driver is probed, and booting with
iommu=off does not solve the problem.
Looking at the AHCI specification, PxCLBU and PxFBU are both read only '0'
for HBAs that do not support 64-bit addressing.
For HBAs that do support 64-bit addressing, the registers are read write,
with a reset value that is Implementation Specific.
When
cifs: Fix server use-after-free in cifs_chan_skip_or_disable()
In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix server use-after-free in cifs_chan_skip_or_disable()
When a secondary channel is no longer supported by the server,
cifs_chan_skip_or_disable() drops the channel reference with
cifs_put_tcp_session() and then continues to use the server pointer by
calling cifs_signal_cifsd_for_reconnect() on it and reading its
primary_server pointer. cifs_put_tcp_session() can drop the last
reference of the channel and tear it down, so both the channel and the
primary server (whose reference is also dropped by
cifs_put_tcp_session()) can be freed before they are signaled for
recon
exec: Cleanup POSIX timers right after de_thread()
In the Linux kernel, the following vulnerability has been resolved:
exec: Cleanup POSIX timers right after de_thread()
A per-thread CPU timer holds a reference to the PID of the thread it is
attached to and, while it is armed, its node is queued in that thread's
posix_cputimers. The task is looked up by that PID.
When a non-leader thread exec()s, de_thread() changes which task owns
that PID. pid_task(timer->it.cpu.pid, PIDTYPE_PID) then returns NULL,
but the node is still queued on tsk, which is alive. timer_lock_sighand()
takes a failed lookup to mean that the node is already dequeued, so it
has nothing to undo.
begin_new_exec() calls po
rds: ib: use rds_conn_drop() on protocol version mismatch
In the Linux kernel, the following vulnerability has been resolved:
rds: ib: use rds_conn_drop() on protocol version mismatch
rds_ib_cm_connect_complete() runs from the RDMA-CM event handler with
conn->c_cm_lock held. When the peer negotiates a protocol version
older than RDS_PROTOCOL_COMPAT_VERSION, the handler calls
rds_conn_destroy(), which is only safe in the rmmod path: it
synchronously tears the connection down and flush_work()es the
shutdown work cp_down_w.
That shutdown work (rds_conn_shutdown()) needs cp_cm_lock, which is
the very lock the event handler still holds, so the flush never
completes: the two workers wait on each other
In the Linux kernel, the following vulnerability has been resolved:
tcp: exclude old ACKs from tcp fast path
Exclude old ACKs before SND.UNA from the tcp fast path
as well as ACKs after SND.NXT.
Such ACKs will fall through to the slow path, where tcp_ack()
performs the appropriate validation and challenge ACK handling
according to RFC5961 and Commit 3d501dd326fb1c7 ("tcp: do not
accept ACK of bytes we never sent").
This prevents old ACKs from being accepted
or modifying connection state as part of the fast path before
appropriate ACK validation is applied.
In particular, this prevents payload carried by a segment with
an excessively old A
swiotlb: use the adjusted address for the highmem page lookup
In the Linux kernel, the following vulnerability has been resolved:
swiotlb: use the adjusted address for the highmem page lookup
swiotlb_bounce() reads the page frame number from the slot's recorded
orig_addr, then advances orig_addr by tlb_offset to reach the address
the caller asked about. The highmem branch mixes the two: the offset
within the page comes from the adjusted address, the page from the value
before it.
Once the adjustment crosses a page boundary the pair no longer describes
one location, and the whole copy lands one page below the intended one
for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE
writes
RDMA/ucma: Serialize join and leave on copy_to_user failure
In the Linux kernel, the following vulnerability has been resolved:
RDMA/ucma: Serialize join and leave on copy_to_user failure
rdma_join_multicast() queues RoCE work that later reads the ucma_multicast
through event->param.ud.private_data, then list_add()s the CMA multicast
at the head of id_priv->mc_list. rdma_leave_multicast() matches only by
sockaddr and destroys the first hit.
ucma_process_join() used to drop ctx->mutex after a successful join and
retake it only if copy_to_user() failed. Two concurrent JOIN_MCAST calls
with the same address can therefore insert a second CMA entry before the
first thread's leave. leave then cancels the
RDMA/core: fix refcount bug in iwpm_get_nlmsg_request()
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: fix refcount bug in iwpm_get_nlmsg_request()
iwpm_get_nlmsg_request() initializes refcount _after_ list_add_tail()
making it accessible to global list where another CPU can kref_get()
on nlmsg_request causing a refcount "addition on 0" bug. Fix this
by initializing kref _before_ list_add_tail() so refcount for
nlmsg_request can be incremented/decremented normally. In addition,
also initialize every field before list_add_tail().
In the Linux kernel, the following vulnerability has been resolved:
openvswitch: avoid reallocating confirmed conntrack labels
ovs_ct_get_conn_labels() adds the labels extension when a conntrack
entry does not have one. Confirmed conntracks can be read locklessly,
so adding an extension may reallocate and free the extension block
while another CPU accesses it.
Only add the extension for unconfirmed conntracks. A confirmed
conntrack without labels now fails the caller's label operation instead
of reallocating its extension storage.
arm64: hibernate: pass HVC_SET_VECTORS args to the resume hvc
In the Linux kernel, the following vulnerability has been resolved:
arm64: hibernate: pass HVC_SET_VECTORS args to the resume hvc
swsusp_arch_suspend_exit() reinstalls the restored kernel's hyp stub
vectors with an hvc, but never passes the arguments. x0 is not set to
HVC_SET_VECTORS and x1 is not set to the vector address, so the stub
dispatch falls through and returns without writing vbar_el2. EL2 is
left pointing at the trans_pgd copy of the vectors, a page that
swsusp_free() releases right after resume.
Set the arguments up the same way __hyp_set_vectors() does.
Without this fix, Vladimir was able to trigger a hang when resuming from
arm64: percpu: Fix LSE operations on {8,16}-bit types
In the Linux kernel, the following vulnerability has been resolved:
arm64: percpu: Fix LSE operations on {8,16}-bit types
The assembly for __percpu_##name##_case_##sz() and
__percpu_##name##_return_case_##sz() doesn't use the 'sfx' macro
argument to form the LSE instruction. Without 'sfx', a W register
argument will imply a 32-bit memory location, and consequently
{8,16}-bit ops will erroneously read and write 32 bits of memory when
the LSE instruction is used.
Fix this by appending 'sfx' to 'op_lse' to LSE instruction. It is not
necessary (and not valid) to append 'sfx' to 'op_llsc', as 'op_llsc' is
a register-register operation which doe
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_codec: validate vendor codec count length
The Read Local Supported Codecs parsers consume the variable-sized
standard codec array before parsing the vendor codec count. Although the
initial reply-size check includes a vendor count byte in the fixed layout,
it does not guarantee that the byte remains after the standard codec array.
If a controller reply ends immediately after that array, calculating the
vendor codec array size reads vnd_codecs->num beyond the skb data. Use
skb_pull_data() to validate and consume each codec header before using its
count in b
Bluetooth: hci_sync: Serialize local codec list cleanup
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Serialize local codec list cleanup
hci_dev_close_sync() clears hdev->local_codecs after releasing hdev->lock.
Codec list additions and both traversals in sco_sock_getsockopt() use that
lock, but the close path does not. A close and BT_CODEC query can therefore
interleave as follows:
hci_dev_close_sync() sco_sock_getsockopt()
hci_dev_lock()
fetch codec entry
hci_codec_list_clear()
kfree(entry)
read entry->id
The reader then accesses an entry
btrfs: take commit root semaphore when iterating in mark_block_group_to_copy()
In the Linux kernel, the following vulnerability has been resolved:
btrfs: take commit root semaphore when iterating in mark_block_group_to_copy()
mark_block_group_to_copy() iterates over the commit root with
skip_locking=true. A concurrent transaction commit can swap and free
the commit root during iteration, causing use-after-free when
accessing extent buffers.
Fix it by using path->need_commit_sem to protect the commit root search.
In the Linux kernel, the following vulnerability has been resolved:
ipv6: xfrm: use full sockets in local error paths
xfrm6_local_rxpmtu() and xfrm6_local_error() dereference skb->sk as if it
always pointed at a full IPv6 socket.
That is not guaranteed. TCP SYN-ACK skbs can be owned by a
TCP_NEW_SYN_RECV request_sock while the output path itself is driven by the
full listener. If rerouting selects an IPv6 XFRM tunnel route with a lower
MTU, the local PMTU/error handling path can reach these callbacks with that
mini-socket still attached to the skb.
The callbacks then miscast the request socket as a full inet/IPv6 socket and
can read beyon
In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: fix RX checksum use-after-free
lan743x_rx_process_buffer() adds each non-first receive buffer to the
head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb()
linearizes the head and frees the fragment skb metadata.
The checksum-success path then writes ip_summed through the local skb
pointer, which still points to the final fragment. This causes a
use-after-free write when a packet spans more than one receive buffer.
Set ip_summed on the surviving head skb instead. Multi-buffer receive
can occur after a live MTU increase because existing ring e
net: wwan: t7xx: validate the netif index in t7xx_ccmni_recv_skb()
In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: validate the netif index in t7xx_ccmni_recv_skb()
The netif index carried in the DPMAIF PIT header is five bits wide,
but ccmni_inst[] only has room for NIC_DEV_MAX (21) entries.
t7xx_ccmni_recv_skb() indexes the array without a bounds check, so
indexes 21 to 31 read past it. The out-of-bounds value lands in the
callback table that follows the array, which is never NULL, so the
existing !ccmni check does not catch it and the driver dereferences
whatever sits there as a struct t7xx_ccmni.
Drop the skb when the index is out of range.
Verified in a QEMU gu
net: wwan: mhi_wwan_mbim: guard against a cyclic NDP chain
In the Linux kernel, the following vulnerability has been resolved:
net: wwan: mhi_wwan_mbim: guard against a cyclic NDP chain
The NDP traversal in mhi_mbim_rx() only stops when wNextNdpIndex is
zero. Nothing requires the offsets to advance, so a modem that
points an NDP at itself, or at an earlier NDP, keeps the loop
spinning forever on one CPU.
Break out when the next NDP offset is not larger than the current
one.
Verified in a QEMU guest with a fault injector feeding the driver's
receive callback an NTB whose single NDP points at itself: the
unpatched driver spins in mhi_mbim_rx() with one CPU pinned at 100%
and the thread never retu
net: wwan: mhi_wwan_mbim: check skb_copy_bits() return value
In the Linux kernel, the following vulnerability has been resolved:
net: wwan: mhi_wwan_mbim: check skb_copy_bits() return value
mhi_mbim_rx() ignores the return value of skb_copy_bits() when it
copies each datagram out of the NTB. The datagram offset and length
come from the DPE, which is only checked to lie within the NTB
itself, so a modem can point a datagram outside the received skb.
The copy then fails and the freshly allocated skbn is passed to
netif_rx() with its uninitialized contents still in place, leaking
kernel heap memory into the network stack.
Free the skb and account an error when the copy fails.
Verified in a QEMU gues
net/sched: act_api: release tail references on DELACTION failure
In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: release tail references on DELACTION failure
A batched RTM_DELACTION request takes a temporary reference on each
action before attempting any deletion. tcf_action_delete() clears
each processed slot and drops its temporary reference before attempting
the deletion. If deletion fails, tca_action_gd() calls
tcf_action_put_many() to release the remaining references, but its
tcf_act_for_each_action() iterator stops at the first NULL slot.
When a batch stops at an action bound to a filter, this leaks a
reference on each subsequent action. A later delete of an