Vulnérabilités de linux · Page n° 36

net/sched: hhf: cap hh_flows_limit at change time

In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: cap hh_flows_limit at change time hhf_change() stores TCA_HHF_HH_FLOWS_LIMIT with no upper bound. A huge hh_flows_limit lets each new heavy-hitter flow pass the hh_flows_current_cnt check in alloc_new_hh() and forces a fixed-size kzalloc(GFP_ATOMIC) per flow under spoofed traffic, for unbounded memory growth. Bound the attribute with NLA_POLICY_MAX() at 2*HH_FLOWS_CNT (the hhf_init() default) and report the rejected value via extack. The deprecated nested parse is kept: legacy tc does not set NLA_F_NESTED on TCA_OPTIONS. Configs relying on hh_limit above th

• Mettez à jour vers 6.12.113-1

net/packet: clear RX owner on VNET header error

In the Linux kernel, the following vulnerability has been resolved: net/packet: clear RX owner on VNET header error Commit 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race condition") added rx_owner_map and made tpacket_rcv() claim a V1 or V2 ring slot before converting the virtio-net header. If the conversion fails, the drop path leaves the slot claimed. With a one-frame TPACKET_V2 ring, an unsupported UDP GSO packet leaves the only slot unavailable, so the ring also drops the next valid packet. Clear the ownership bit on this error path. TPACKET_V3 already clears its block state here.

• Mettez à jour vers 6.12.113-1

scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable()

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable() scsi_cdl_enable() uses length fields returned by MODE SENSE to locate the ATA feature mode page in a 64-byte stack buffer. A target can report a total length shorter than its mode header and block descriptors. The unsigned subtraction used for the MODE SELECT length can wrap, and the separately computed buf_data can point beyond buf. During automatic scan, enable is false, so the read-modify-write of buf_data[4] can clear the low two bits of a target-selected out-of-bounds stack byte. scsi_mode_select() can then

• Mettez à jour vers 6.12.113-1

xfrm: serialize state GC with device state flush

In the Linux kernel, the following vulnerability has been resolved: xfrm: serialize state GC with device state flush The deferred-device pass in xfrm_dev_state_flush() finds states under xfrm_state_dev_gc_lock, but drops the lock before calling xfrm_dev_state_free() because the driver callback may sleep. The device GC list does not hold an xfrm_state reference, so the state GC worker can destroy the same state concurrently. The race can proceed as follows: CPU 0 CPU 1 find x on the device GC list drop xfrm_state_dev_gc_lock read x->xso.dev xfrm_state_gc_destroy(x

• Mettez à jour vers 6.12.113-1

xfrm: use hlist_del_init_rcu for state_cache and state_cache_input

In the Linux kernel, the following vulnerability has been resolved: xfrm: use hlist_del_init_rcu for state_cache and state_cache_input Commit 14acf9652e56 ("xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete") converted bydst/bysrc/byseq/byspi from hlist_del_rcu() to hlist_del_init_rcu() so that a second __xfrm_state_delete() on the same object becomes a no-op rather than a write through LIST_POISON pprev. It missed state_cache and state_cache_input, which kept hlist_del_rcu(): - hlist_del_rcu() leaves pprev = LIST_POISON2 (non-NULL), so hlist_unhashed() returns false. - hlist_del_init_rcu() leaves pprev = NULL, so hlist_un

• Mettez à jour vers 6.12.113-1

xfrm: save input state data before secpath resets

In the Linux kernel, the following vulnerability has been resolved: xfrm: save input state data before secpath resets xfrm_input() stores the current xfrm_state in the skb secpath while it continues receive-side processing. Some input paths can reset that secpath before xfrm_input() has finished dereferencing the state. Receive callback users such as VTI and XFRM interfaces can reset the secpath. The VTI receive path does so before checking whether the packet crosses network namespaces, while the XFRM interface path does so only for cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also reset the secpath before the final d

• Mettez à jour vers 6.12.113-1

mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ

In the Linux kernel, the following vulnerability has been resolved: mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ On I6500 CPU cores, lld and scd give no ordering guarantees (same as all other instructions). To respect the assumption that arch_cmpxchg() is fully ordered, we must inject sync instructions above and below our lld/scd loops using the already in place WEAK_REORDERING_BEYOND_LLSC infrastructure. Otherwise, bad things can happen: [ 34.054496] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000000, epc == a80000080838e01c, ra == a80000080838dfc4 [ 34.054559] Oops[#1]: [ 34.069561

memstick: ms_block: destroy io_queue workqueue on removal

In the Linux kernel, the following vulnerability has been resolved: memstick: ms_block: destroy io_queue workqueue on removal msb_init_disk() creates the per-card ordered workqueue msb->io_queue with alloc_ordered_workqueue(). It is torn down with destroy_workqueue() only on the init error path; msb_remove() never destroys it. msb_stop() merely flushes the queue, and neither msb_data_clear() nor put_disk() free it. As a result every card insert/remove cycle leaks the workqueue and its kworker, exhausting kernel memory over repeated cycles. Destroy the workqueue in msb_remove() after the disk has been removed and the queue drained.

• Mettez à jour vers 6.12.113-1

KEYS: encrypted: fix integer overflow of datablob_len

In the Linux kernel, the following vulnerability has been resolved: KEYS: encrypted: fix integer overflow of datablob_len encrypted_key_alloc() stores datablob_len in a u16. It is computed from multiple string and payload lengths. If the result exceeds U16_MAX, the assignment truncates the allocation size. KASAN reports a 32760-byte slab-out-of-bounds write when __ekey_init() copies the master key description into the undersized buffer. The total payload length stored in key->datalen is also a u16. Use check_add_overflow() to reject values that do not fit either destination, and use kzalloc_flex() for the flexible-array allocation.

• Mettez à jour vers 6.12.113-1

KEYS: trusted: Fix tpm2_load_cmd() boundary check

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix tpm2_load_cmd() boundary check tpm2_load_cmd() does boundary checks against the ASN.1 size i.e., payload->blob_len. Address this by passing the decoded blob size to tpm2_load_cmd(), and use it for the boundary checks.

• Mettez à jour vers 6.12.113-1

i2c: atr: fix dangling adapter pointer on add failure

In the Linux kernel, the following vulnerability has been resolved: i2c: atr: fix dangling adapter pointer on add failure i2c_atr_add_adapter() stores atr->adapter[chan_id] before i2c_add_adapter() so that the I2C bus notifier can match child clients during registration. On failure the channel is freed but the slot was left pointing at freed memory, which can lead to use-after-free in i2c_atr_del_adapter() / cleanup and also block reuse with -EEXIST. Clear the slot on the i2c_add_adapter() error path before freeing chan.

• Mettez à jour vers 6.12.113-1

IB/mlx4: Fix use-after-free on pkey sysfs registration failure

In the Linux kernel, the following vulnerability has been resolved: IB/mlx4: Fix use-after-free on pkey sysfs registration failure register_pkey_tree() ignores errors from register_one_pkey_tree() and continues registering the remaining slaves. The per-slave error path has already released the pkey parent kobjects, but their pointers remain stored in the device. A later device cleanup therefore passes the stale pointers to kobject_put(), causing a use-after-free. Clear the parent pointers after releasing a failed slave tree and skip unregistered trees during device cleanup. This preserves the existing best-effort registration behavior whil

• Mettez à jour vers 6.12.113-1

IB/hfi1: Fix the PIO_CRED credit-return mmap

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix the PIO_CRED credit-return mmap hfi1_file_mmap()'s PIO_CRED case must hand user space the single credit-return page that holds this context's entry. That page is the second or third page of the per-node credit-return allocation once the hardware send context index reaches 64 or 128, so the failure below is intermittent: when the entry lands on the first page the offset is zero and everything works. Two things are wrong. First, cr_page_offset is a byte offset but .va is a struct credit_return *, so adding it is pointer arithmetic and scales the offset by size

• Mettez à jour vers 6.12.113-1

selinux: preserve user SID across nested backing files

In the Linux kernel, the following vulnerability has been resolved: selinux: preserve user SID across nested backing files SELinux saves the user file SID in a backing-file security blob so it remains available after mmap() replaces vma->vm_file with a backing file. For nested backing files (overlayfs over overlayfs, or FUSE passthrough backed by overlayfs), user_file may itself be a backing file. Its fsec->sid is the SID of the mounter that opened it, rather than the user that opened the top-level file. mprotect() then checks fd { use } against the mounter SID. This can incorrectly deny access without a domain transition, or check the

• Mettez à jour vers 6.12.113-1

selinux: recheck intermediate backing files on mprotect()

In the Linux kernel, the following vulnerability has been resolved: selinux: recheck intermediate backing files on mprotect() mprotect() can be used to bypass the SELinux checks that mmap() performs against the intermediate layers of a stacked filesystem. mmap() checks every backing layer as the request descends through the stack. mprotect() only has the lowest backing file in vma->vm_file, so it rechecks the top-level user and the lowest mounter, but skips the mounters of every layer in between. With two nested overlayfs mounts and a policy denying mounter_t -> middle_file_t:file { execute }, a direct mmap(PROT_EXEC) is denied: avc:

• Mettez à jour vers 6.12.113-1

mmc: core: Cancel SDIO IRQ work before freeing host

In the Linux kernel, the following vulnerability has been resolved: mmc: core: Cancel SDIO IRQ work before freeing host A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work from its interrupt handler. That work is only cancelled on the suspend path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed just before the controller freed its IRQ can run after mmc_host_classdev_release() has freed the host and dereference it through container_of(). Cancel host->sdio_irq_work in mmc_free_host(), like the existing host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel delayed work before releasi

• Mettez à jour vers 6.12.113-1

mmc: hsq: Fix use-after-free in retry work

In the Linux kernel, the following vulnerability has been resolved: mmc: hsq: Fix use-after-free in retry work mmc_hsq_pump_requests() queues retry_work when request_atomic() returns -EBUSY; today sdhci-sprd is the only consumer that implements request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but is never cancelled during driver removal. Work still pending at unbind can therefore run after the devm allocation has been released and dereference hsq->mmc and hsq->mrq. Use devm_work_autocancel() to cancel and drain retry_work before the devm allocation is released. By the time devres cleanup begins, mmc_remove_host() has alr

• Mettez à jour vers 6.12.113-1

mmc: mmci: Fix use-after-free in busy-timeout work

In the Linux kernel, the following vulnerability has been resolved: mmc: mmci: Fix use-after-free in busy-timeout work ux500_busy_complete() can queue ux500_busy_timeout_work for an R1b command, but mmci_remove() never cancels it. The work can subsequently dereference the devm-allocated mmci_host after it has been released. Mask the controller interrupts and disable the delayed work during removal. This drains any queued instance and stops an IRQ handler that is still in progress from queueing the work again once it has been disabled. This issue was found by an in-house static analysis tool.

• Mettez à jour vers 6.12.113-1

mmc: mxcmmc: cancel data work and watchdog on remove

In the Linux kernel, the following vulnerability has been resolved: mmc: mxcmmc: cancel data work and watchdog on remove mxcmci_remove() frees the host through the devm tail, but neither it nor mmc_remove_host() drains the driver's own asynchronous state. host->watchdog, a 10 s timer armed on the DMA path in mxcmci_setup_data(), is deleted only by the DMA- and IRQ-complete paths, which the remove path does not explicitly drain; it can therefore fire after the host is freed and dereference it in mxcmci_watchdog(). host->datawork, armed from the IRQ handler on the PIO path, is not cancelled by the remove path either. Free the devm-registere

• Mettez à jour vers 6.12.113-1

mmc: sdhci-of-aspeed: Remove children before releasing SDC resources

In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-aspeed: Remove children before releasing SDC resources Probe failure and removal leave SDHCI child devices registered after the parent clock and managed resources are released. Unregister the OF children in reverse order before disabling the parent clock on both paths. Use of_platform_device_destroy() because manual child creation does not set the flag required by of_platform_depopulate(). This issue was identified during our ongoing static-analysis research while reviewing kernel code.

• Mettez à jour vers 6.12.113-1