Vulnérabilités de linux-aws · Page n° 198

comedi: dt2815: add hardware detection to prevent crash

In the Linux kernel, the following vulnerability has been resolved: comedi: dt2815: add hardware detection to prevent crash The dt2815 driver crashes when attached to I/O ports without actual hardware present. This occurs because syzkaller or users can attach the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl. When no hardware exists at the specified port, inb() operations return 0xff (floating bus), but outb() operations can trigger page faults due to undefined behavior, especially under race conditions: BUG: unable to handle page fault for address: 000000007fffff90 #PF: supervisor write access in kernel mode #PF: err

• Mettez à jour vers 5.15.0-1112.119

comedi: ni_atmio16d: Fix invalid clean-up after failed attach

In the Linux kernel, the following vulnerability has been resolved: comedi: ni_atmio16d: Fix invalid clean-up after failed attach If the driver's COMEDI "attach" handler function (`atmio16d_attach()`) returns an error, the COMEDI core will call the driver's "detach" handler function (`atmio16d_detach()`) to clean up. This calls `reset_atmio16d()` unconditionally, but depending on where the error occurred in the attach handler, the device may not have been sufficiently initialized to call `reset_atmio16d()`. It uses `dev->iobase` as the I/O port base address and `dev->private` as the pointer to the COMEDI device's private data structure.

• Mettez à jour vers 5.15.0-1112.119

comedi: me_daq: Fix potential overrun of firmware buffer

In the Linux kernel, the following vulnerability has been resolved: comedi: me_daq: Fix potential overrun of firmware buffer `me2600_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Although it checks that the supplied firmware is at least 16 bytes long, it does not check that it is long enough to contain the data stream. Add a test to ensure that the

• Mettez à jour vers 5.15.0-1112.119

comedi: me4000: Fix potential overrun of firmware buffer

In the Linux kernel, the following vulnerability has been resolved: comedi: me4000: Fix potential overrun of firmware buffer `me4000_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. Note: The firmwar

• Mettez à jour vers 5.15.0-1112.119

vxlan: validate ND option lengths in vxlan_na_create

In the Linux kernel, the following vulnerability has been resolved: vxlan: validate ND option lengths in vxlan_na_create vxlan_na_create() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address.

• Mettez à jour vers 5.15.0-1112.119

net: ftgmac100: fix ring allocation unwind on open failure

In the Linux kernel, the following vulnerability has been resolved: net: ftgmac100: fix ring allocation unwind on open failure ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and rx_scratch in stages. On intermediate failures it returned -ENOMEM directly, leaking resources allocated earlier in the function. Rework the failure path to use staged local unwind labels and free allocated resources in reverse order before returning -ENOMEM. This matches common netdev allocation cleanup style.

• Mettez à jour vers 5.15.0-1112.119

usb: typec: ucsi: validate connector number in ucsi_notify_common()

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_notify_common() The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a 7-bit field (0-127) that is used to index into the connector array in ucsi_connector_change(). However, the array is only allocated for the number of connectors reported by the device (typically 2-4 entries). A malicious or malfunctioning device could report an out-of-range connector number in the CCI, causing an out-of-bounds array access in ucsi_connector_change(). Add a bounds check in ucsi_notify_common(), the central point where CC

usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop A race condition between gether_disconnect() and eth_stop() leads to a NULL pointer dereference. Specifically, if eth_stop() is triggered concurrently while gether_disconnect() is tearing down the endpoints, eth_stop() attempts to access the cleared endpoint descriptor, causing the following NPE: Unable to handle kernel NULL pointer dereference Call trace: __dwc3_gadget_ep_enable+0x60/0x788 dwc3_gadget_ep_enable+0x70/0xe4 usb_ep_enable+0x60/0x15c eth_stop+0xb8/0x108 Because eth_stop() cr

• Mettez à jour vers 5.15.0-1112.119

usb: gadget: uvc: fix NULL pointer dereference during unbind race

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix NULL pointer dereference during unbind race Commit b81ac4395bbe ("usb: gadget: uvc: allow for application to cleanly shutdown") introduced two stages of synchronization waits totaling 1500ms in uvc_function_unbind() to prevent several types of kernel panics. However, this timing-based approach is insufficient during power management (PM) transitions. When the PM subsystem starts freezing user space processes, the wait_event_interruptible_timeout() is aborted early, which allows the unbind thread to proceed and nullify the gadget pointer (cdev->gadget

• Mettez à jour vers 5.15.0-1112.119

usb: gadget: f_ecm: Fix net_device lifecycle with device_move

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ecm: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Us

usb: gadget: f_eem: Fix net_device lifecycle with device_move

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_eem: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_m

usb: gadget: f_subset: Fix net_device lifecycle with device_move

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory

usb: gadget: f_rndis: Fix net_device lifecycle with device_move

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory

usb: gadget: f_hid: move list and spinlock inits from bind to alloc

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: move list and spinlock inits from bind to alloc There was an issue when you did the following: - setup and bind an hid gadget - open /dev/hidg0 - use the resulting fd in EPOLL_CTL_ADD - unbind the UDC - bind the UDC - use the fd in EPOLL_CTL_DEL When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported within remove_wait_queue (via ep_remove_wait_queue). After some debugging I found out that the queues, which f_hid registers via poll_wait were the problem. These were initialized using init_waitqueue_head inside hidg_bind. So effectively, th

• Mettez à jour vers 5.15.0-1112.119

usb: gadget: f_uac1_legacy: validate control request size

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate control request size f_audio_complete() copies req->length bytes into a 4-byte stack variable: u32 data = 0; memcpy(&data, req->buf, req->length); req->length is derived from the host-controlled USB request path, which can lead to a stack out-of-bounds write. Validate req->actual against the expected payload size for the supported control selectors and decode only the expected amount of data. This avoids copying a host-influenced length into a fixed-size stack object.

• Mettez à jour vers 5.15.0-1112.119

fs/ntfs3: validate rec->used in journal-replay file record check

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate rec->used in journal-replay file record check check_file_record() validates rec->total against the record size but never validates rec->used. The do_action() journal-replay handlers read rec->used from disk and use it to compute memmove lengths: DeleteAttribute: memmove(attr, ..., used - asize - roff) CreateAttribute: memmove(..., attr, used - roff) change_attr_size: memmove(..., used - PtrOffset(rec, next)) When rec->used is smaller than the offset of a validated attribute, or larger than the record size, these subtractions can underflow

• Mettez à jour vers 5.15.0-1112.119

f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io()

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io() The xfstests case "generic/107" and syzbot have both reported a NULL pointer dereference. The concurrent scenario that triggers the panic is as follows: F2FS_WB_CP_DATA write callback umount - f2fs_write_checkpoint - f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA) - blk_mq_end_request - bio_endio - f2fs_write_end_io : dec_page_count(sbi, F2FS_WB_CP_DATA) : wake_up(&sbi->cp_wait)

• Mettez à jour vers 5.15.0-1117.124

ksmbd: require minimum ACE size in smb_check_perm_dacl()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: require minimum ACE size in smb_check_perm_dacl() Both ACE-walk loops in smb_check_perm_dacl() only guard against an under-sized remaining buffer, not against an ACE whose declared `ace->size` is smaller than the struct it claims to describe: if (offsetof(struct smb_ace, access_req) > aces_size) break; ace_size = le16_to_cpu(ace->size); if (ace_size > aces_size) break; The first check only requires the 4-byte ACE header to be in bounds; it does not require access_req (4 bytes at offset 4) to be readable. An attacker who has set a crafted DACL on a

• Mettez à jour vers 5.15.0-1117.124

smb: server: fix active_num_conn leak on transport allocation failure

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of th

• Mettez à jour vers 5.15.0-1117.124

smb: client: validate the whole DACL before rewriting it in cifsacl

In the Linux kernel, the following vulnerability has been resolved: smb: client: validate the whole DACL before rewriting it in cifsacl build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a server-supplied dacloffset and then use the incoming ACL to rebuild the chmod/chown security descriptor. The original fix only checked that the struct smb_acl header fits before reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate header-field OOB read, but the rewrite helpers still walk ACEs based on pdacl->num_aces with no structural validation of the incoming DACL body. A malicious server can return a truncated

• Mettez à jour vers 5.15.0-1117.124