PatchFirst · Vulnérabilités récentes
Vulnérabilités publiées pour linux-kvm au cours des 30 derniers jours : 407. Présentes dans le catalogue KEV : 0.
Vulnérabilités : 5677
In the Linux kernel, the following vulnerability has been resolved: ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy For some reason, the driver adding support for Exynos5420 MIPI phy back in 2016 wasn't used on Exynos5420, which caused a kernel panic. Add the proper compatible for it.
In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers.
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: reject auth/assoc to AP with our address If the AP uses our own address as its MLD address or BSSID, then clearly something's wrong. Reject such connections so we don't try and fail later.
In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix incomplete state save in rxe_requester If a send packet is dropped by the IP layer in rxe_requester() the call to rxe_xmit_packet() can fail with err == -EAGAIN. To recover, the state of the wqe is restored to the state before the packet was sent so it can be resent. However, the routines that save and restore the state miss a significnt part of the variable state in the wqe, the dma struct which is used to process through the sge table. And, the state is not saved before the packet is built which modifies the dma struct. Under heavy stress testing with many
In the Linux kernel, the following vulnerability has been resolved: btrfs: insert tree mod log move in push_node_left There is a fairly unlikely race condition in tree mod log rewind that can result in a kernel panic which has the following trace: [530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002 [530.618] #PF: supervisor read access in kernel mode [530.629] #PF: error_code(0x0000) - not-present page [530.641] PGD 0 P4D 0 [530.647] Oops: 0000 [#1] SMP
In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: Add a check for oversized packets Occasionnaly we may get oversized packets from the hardware which exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early check which drops the packet to avoid invoking skb_over_panic() and move on to processing the next packet.
In the Linux kernel, the following vulnerability has been resolved: ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode There are many places that will get unhappy (and crash) when ext4_iget() returns a bad inode. However, if iget the boot loader inode, allows a bad inode to be returned, because the inode may not be initialized. This mechanism can be used to bypass some checks and cause panic. To solve this problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag we'd be returning bad inode from ext4_iget(), otherwise we always return the error code if the inode is bad inode.(suggested by Jan Kara)
In the Linux kernel, the following vulnerability has been resolved: xen/gntdev: Accommodate VMA splitting Prior to this commit, the gntdev driver code did not handle the following scenario correctly with paravirtualized (PV) Xen domains: * User process sets up a gntdev mapping composed of two grant mappings (i.e., two pages shared by another Xen domain). * User process munmap()s one of the pages. * User process munmap()s the remaining page. * User process exits. In the scenario above, the user process would cause the kernel to log the following messages in dmesg for the first munmap(), and the second munmap() call would result in simila
In the Linux kernel, the following vulnerability has been resolved: cgroup: split cgroup_destroy_wq into 3 workqueues A hung task can occur during [1] LTP cgroup testing when repeatedly mounting/unmounting perf_event and net_prio controllers with systemd.unified_cgroup_hierarchy=1. The hang manifests in cgroup_lock_and_drain_offline() during root destruction. Related case: cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio Call Trace: cgroup_lock_and_drain_offline+0x14c/0x1e8 cgroup_destroy_root+0x3c/0x2c0 css_free_rwork_fn+0x248/0x338 process_one_work+0x16c/0x3b8
In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: avoid buffer overflow in WID string configuration Fix the following copy overflow warning identified by Smatch checker. drivers/net/wireless/microchip/wilc1000/wlan_cfg.c:184 wilc_wlan_parse_response_frame() error: '__memcpy()' 'cfg->s[i]->str' copy overflow (512 vs 65537) This patch introduces size check before accessing the memory buffer. The checks are base on the WID type of received data from the firmware. For WID string configuration, the size limit is determined by individual element size in 'struct wilc_cfg_str_vals' that is maintained in
In the Linux kernel, the following vulnerability has been resolved: cnic: Fix use-after-free bugs in cnic_delete_task The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(), which does not guarantee that the delayed work item 'delete_task' has fully completed if it was already running. Additionally, the delayed work item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that
In the Linux kernel, the following vulnerability has been resolved: dm-stripe: fix a possible integer overflow There's a possible integer overflow in stripe_io_hints if we have too large chunk size. Test if the overflow happened, and if it did, don't set limits->io_min and limits->io_opt;
In the Linux kernel, the following vulnerability has been resolved: net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") rfkill_find_type() gets called with the possibly uninitialized "const char *type_name;" local variable. On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752" acpi_device, the rfkill->type is set based on the ACPI acpi_device_id: rfkill->type = (unsigned)id->driver_data; and there is no "type" property so device_property_read_string() will fail and leave type_name uninitialized, leading to
In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Set merge to zero early in af_alg_sendmsg If an error causes af_alg_sendmsg to abort, ctx->merge may contain a garbage value from the previous loop. This may then trigger a crash on the next entry into af_alg_sendmsg when it attempts to do a merge that can't be done. Fix this by setting ctx->merge to zero near the start of the loop.
Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix slab-out-of-bounds in ses_intf_remove() A fix for: BUG: KASAN: slab-out-of-bounds in ses_intf_remove+0x23f/0x270 [ses] Read of size 8 at addr ffff88a10d32e5d8 by task rmmod/12013 When edev->components is zero, accessing edev->component[0] members is wrong.
In the Linux kernel, the following vulnerability has been resolved: media: v4l2-mem2mem: add lock to protect parameter num_rdy Getting below error when using KCSAN to check the driver. Adding lock to protect parameter num_rdy when getting the value with function: v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready. kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue kworker/u16:3: [name:report&] kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7: kworker/u16:3: v4l2_m2m_buf_queue+0xd8/0x10c
In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Fix leak in devfreq_dev_release() srcu_init_notifier_head() allocates resources that need to be released with a srcu_cleanup_notifier_head() call. Reported by kmemleak.
In the Linux kernel, the following vulnerability has been resolved: tipc: do not update mtu if msg_max is too small in mtu negotiation When doing link mtu negotiation, a malicious peer may send Activate msg with a very small mtu, e.g. 4 in Shuang's testing, without checking for the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then n->links[bearer_id].mtu is set to 4294967228, which is a overflow of '4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss(). With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning: tipc: Too large msg, purging xmit list 1 5 0 40 4! tipc: Too large msg, purging xmit list 1 15 0 60 4!
In the Linux kernel, the following vulnerability has been resolved: virtio-mmio: don't break lifecycle of vm_dev vm_dev has a separate lifecycle because it has a 'struct device' embedded. Thus, having a release callback for it is correct. Allocating the vm_dev struct with devres totally breaks this protection, though. Instead of waiting for the vm_dev release callback, the memory is freed when the platform_device is removed. Resulting in a use-after-free when finally the callback is to be called. To easily see the problem, compile the kernel with CONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs. The fix is easy, don't use devres in thi
Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.