p PatchFirst

PatchFirst · Latest vulnerabilities

Network services stack vulnerabilities

Vulnerabilities published for Network services in the last 30 days: 25. Listed in the KEV catalogue: 0.

RSS ↗
Filter vulnerabilities
Network services

Vulnerabilities: 186

  1. CVE-2026-106589

    Low · CVSS 2.9EPSS 0.08%No fix published

    CVE-2026-106589

    In sshd in OpenSSH through 10.6, in certain environments such as QNX 6 and SCO OpenServer 5, sshd-session can unexpectedly have root privileges. This is related to the GatewayPorts and StreamLocalForwarding configuration options, and lack of support for file-descriptor passing and unprivileged allocation of PTY devices.

    Published Updated
  2. CVE-2026-106587

    Low · CVSS 3.6EPSS 0.08%Fix available

    CVE-2026-106587

    In sshd in OpenSSH before 10.6, the value "none" for a configuration option is sometimes interpreted as a filename but was intended to mean that a feature is disabled.

    • Update to 10.6
    • Update to 1:10.6p1-1
    Published Updated
  3. CVE-2026-106586

    Low · CVSS 2.5EPSS 0.12%Fix available

    CVE-2026-106586

    In sshd in OpenSSH before 10.6, the restrict keyword (in authorized_keys) was supposed to be applicable to tunnel forwarding but was not, a different vulnerability than CVE-2026-73283.

    • Update to 10.6
    • Update to 1:10.6p1-1
    Published Updated
  4. CVE-2026-106585

    Medium · CVSS 6.5EPSS 0.19%Fix available

    CVE-2026-106585

    In sshd and ssh in OpenSSH before 10.6, there is no check for whether the maximum packet length is exceeded during decompression of highly compressed data.

    • Update to 10.6
    • Update to 1:10.6p1-1
    Published Updated
  5. CVE-2026-106584

    Low · CVSS 2.5EPSS 0.06%Fix available

    CVE-2026-106584

    In ssh-keygen in OpenSSH before 10.6, certificates could have incorrect expiration times because of Daylight Saving mishandling. There can be a slightly more severe effect on users in certain Antarctic locations.

    • Update to 10.6
    • Update to 1:10.6p1-1
    Published Updated
  6. CVE-2026-106582

    Low · CVSS 3.7EPSS 0.18%Fix available

    CVE-2026-106582

    In sshd and ssh in OpenSSH before 10.6, an LZ77 dictionary coder can be used even though this is contraindicated by the arXiv 2609.07709 "Crossing the Streams" findings.

    • Update to 10.6
    • Update to 1:10.6p1-1
    Published Updated
  7. CVE-2026-106555

    Low · CVSS 2.2EPSS 0.14%Fix available

    CVE-2026-106555

    In sshd in OpenSSH before 10.6, GSSAPIAuthentication authentication state can incorrectly be persisted across authentication attempts.

    • Update to 10.6
    • Update to 1:10.6p1-1
    Published Updated
  8. CVE-2026-106553

    Low · CVSS 2.2EPSS 0.14%Fix available

    CVE-2026-106553

    In sshd in OpenSSH before 10.6, credentials can incorrectly persist after failure of a GSSAPIAuthentication authentication attempt.

    • Update to 10.6
    • Update to 1:10.6p1-1
    Published Updated
  9. CVE-2026-106552

    Medium · CVSS 4.2EPSS 0.36%Fix available

    CVE-2026-106552

    In sftp in OpenSSH before 10.6, a server can trigger directory traversal (causing files to be written to unintended locations) during a recursive copy operation.

    • Update to 10.6
    • Update to 1:10.6p1-1
    Published Updated
  10. CVE-2026-84784

    High · CVSS 7.5EPSS 0.4%Fix available

    QUIC: Unbounded RETIRE_CONNECTION_ID Backlog

    Issue summary: A malicious remote peer may flood the local QUIC stack with NEW_CONNECTION_ID frames by avoiding a limit check on how many connection IDs the remote QUIC stack can use. Impact summary: The local QUIC stack sends a RETIRE_CONN_ID frame for every NEW_CONNECTION_ID frame it receives. The RETIRE_CONN_ID frame is dispatched via the Control Frame Queue (CFQ). If the remote peer also withholds ACKs, then it can force the local stack to allocate ~400MB (depending on ACK delay). CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: RFC 9000 sections 5.1.1 and 5.1.2 [1] describe the mechanism by which a remot

    • Update to 3.4.8
    • Update to 3.5.5-1ubuntu3.6
    • Update to 3.5.7-1~deb13u3
    • Update to 3.5.9
    • Update to 3.6.5
    • Update to 3.6.5-1
    • Update to 4.0.3
    Published Updated
  11. CVE-2026-84783

    High · CVSS 7.5EPSS 0.23%Fix available

    Use-After-Free in X.509 Extension Cache Under Concurrent Use

    Issue summary: The first concurrent use of the same X.509 certificate by several threads may cause its cached extension data to be freed while another thread is still using it. Impact summary: A remote, unauthenticated peer could crash a multi-threaded TLS client, or a multi-threaded TLS server that requests client certificates, if the first certificate chains built to the same trusted CA certificate are built by several connections at the same time. This is a use-after-free read, which is likely to crash the process, resulting in a Denial of Service. CWE: CWE-416: Use After Free Description: OpenSSL caches the decoded values of a certific

    • Update to 4.0.3
    Published Updated
  12. CVE-2026-84782

    High · CVSS 8.2EPSS 0.39%Fix available

    DTLS Retransmits Handshake Messages From a Stale Buffer Offset

    Issue summary: The DTLS retransmission logic does not correctly handle a handshake message write that is suspended part-way through. The retransmitted message can be read past the message buffer and the retransmission overwrites the internal state the suspended write needs to resume correctly. Impact summary: The retransmitted message can disclose a heap memory to the peer as plaintext handshake data or cause a crash and a Denial of Service when the read reaches an unmapped memory region. CWE: CWE-125: Out-of-bounds Read Description: DTLS handshake messages can be written out in multiple fragments, and a write can suspend mid-message (retu

    • Update to 1.0.1f-1ubuntu2.27+esm17
    • Update to 1.0.2g-1ubuntu4.20+esm19
    • Update to 1.0.2n-1ubuntu5.13+esm7
    • Update to 1.0.2zs
    • Update to 1.1.1-1ubuntu2.1~18.04.23+esm11
    • Update to 1.1.1zj
    • Update to 3.0.23
    • Update to 3.4.8
    • Update to 3.5.7-1~deb13u3
    • Update to 3.5.9
    • Update to 3.6.5
    • Update to 3.6.5-1
    • Update to 4.0.3
    Published Updated
  13. CVE-2026-77696

    Low · CVSS 3.7EPSS 0.24%Fix available

    Timing Side-Channel in SM2 Signature Generation

    Issue summary: SM2 signature generation uses non-constant-time arithmetic on secret values, forming a timing side-channel. Impact summary: An attacker able to measure SM2 signing times may learn information about the per-signature secret nonce, which over many signatures can, via a lattice / Hidden Number Problem attack, lead to recovery of the private key. CWE: CWE-208: Observable Timing Discrepancy Description: SM2 signature generation computes the signature value using variable-time BIGNUM operations on the secret nonce and the private key, so the time taken to produce an SM2 signature depends on these secret values, forming a timing si

    • Update to 1.0.1f-1ubuntu2.27+esm17
    • Update to 1.0.2g-1ubuntu4.20+esm19
    • Update to 1.0.2n-1ubuntu5.13+esm7
    • Update to 1.1.1-1ubuntu2.1~18.04.23+esm11
    • Update to 1.1.1zj
    • Update to 3.0.23
    • Update to 3.4.8
    • Update to 3.5.7-1~deb13u3
    • Update to 3.5.9
    • Update to 3.6.5
    • Update to 3.6.5-1
    • Update to 4.0.3
    Published Updated
  14. CVE-2026-75806

    Medium · CVSS 5.3EPSS 0.39%Fix available

    Unauthenticated and Undersized DTLS 1.2 AEAD Record Causes DoS

    Issue summary: An established DTLS 1.2 association using an AEAD cipher suite can be terminated by a single unauthenticated datagram whose encrypted fragment is shorter than the mandatory explicit IV and authentication tag overhead. Impact summary: An attacker who can send a datagram that is routed to an existing DTLS 1.2 association can tear that association down without knowing any key material. This is a Denial of Service limited to the targeted association. There is no memory safety or confidentiality impact. CWE: CWE-1284: Improper Validation of Specified Quantity in Input Description: In TLS 1.2 and DTLS 1.2 every record protected by

    • Update to 1.1.1zj
    • Update to 3.0.23
    • Update to 3.4.8
    • Update to 3.5.7-1~deb13u3
    • Update to 3.5.9
    • Update to 3.6.5
    • Update to 3.6.5-1
    • Update to 4.0.3
    Published Updated
  15. CVE-2026-75805

    Medium · CVSS 5.3EPSS 0.22%Fix available

    NULL Pointer Dereference in CMP Client Revocation Response Handling

    Issue summary: A CMP client that requests certificate revocation on the basis of a PKCS#10 CSR may dereference a NULL pointer and terminate abnormally when processing a crafted revocation response. Impact summary: The NULL pointer dereference happens on a read which leads to a crash and a Denial of Service for the affected client application. CWE: CWE-476: NULL-pointer dereference Description: A CMP client revoking a certificate has to tell the server which certificate to revoke, and may do so by supplying a PKCS#10 CSR instead of the certificate itself or its issuer name and serial number. This is 'openssl cmp -cmd rr -csr <file>' on th

    • Update to 3.0.13-0ubuntu3.16
    • Update to 3.0.2-0ubuntu1.30
    • Update to 3.0.23
    • Update to 3.4.8
    • Update to 3.5.7-1~deb13u3
    • Update to 3.5.9
    • Update to 3.6.5
    • Update to 3.6.5-1
    • Update to 4.0.3
    Published Updated
  16. CVE-2026-75804

    Medium · CVSS 5.3EPSS 0.35%Fix available

    QUIC Connection-Level Flow Control is Not Enforced for Streams

    Issue summary: OpenSSL QUIC stack does not enforce connection level flow control for streams. Remote peers may send more bytes as long as they fit within the stream flow control limits. Impact summary: A malicious remote peer may exploit the lack of connection flow control for streams to make the QUIC stack receive ~100MB of memory instead of 768 KiB (default flow control window size). CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: The local QUIC stack advertises two flow control limits to its remote peer: stream flow control limit and connection flow control limit. The remote peer must follow both limits w

    • Update to 3.4.8
    • Update to 3.5.5-1ubuntu3.6
    • Update to 3.5.7-1~deb13u3
    • Update to 3.5.9
    • Update to 3.6.5
    • Update to 3.6.5-1
    • Update to 4.0.3
    Published Updated
  17. CVE-2026-72897

    High · CVSS 7.5EPSS 0.27%Fix available

    Out-of-Bounds Access After SSL_set_SSL_CTX() During a Handshake

    Issue summary: A TLS server that calls SSL_set_SSL_CTX() to switch a connection to a different SSL_CTX part way through a handshake may access memory beyond the end of an internal array if the replacement context knows about more provider signature algorithms than the context the connection was created from. Applications which never call SSL_set_SSL_CTX() are not affected. Impact summary: A remote peer may be able to cause a small out-of-bounds read, and in some circumstances a fixed-value out-of-bounds write, on the server heap. This may lead to a Denial of Service. CWE: CWE-787: Out-of-bounds Write Description: A TLS connection records h

    • Update to 3.4.8
    • Update to 3.5.5-1ubuntu3.6
    • Update to 3.5.7-1~deb13u3
    • Update to 3.5.9
    • Update to 3.6.5
    • Update to 3.6.5-1
    • Update to 4.0.3
    Published Updated
  18. CVE-2026-54875

    Low · CVSS 3.7EPSS 0.29%Fix available

    Non-Constant-Time SM2 Scalar Multiplication on ARM64 and RISC-V

    Issue summary: A non-constant-time optimized implementation of scalar point multiplication is used for SM2 private key operations on ARM64 and RISC-V platforms. Impact summary: An attacker able to measure the time taken by, or to observe the cache-line access pattern of SM2 signing or decryption on an affected platform can learn information about the secret scalar. CWE: CWE-208: Observable Timing Discrepancy Description: On ARM64 and RISC-V processors, the SM2 curve uses an optimized scalar multiplication implementation whose conditional branches and table look ups are chosen according to the bits of the secret scalar. The execution time a

    • Update to 3.4.8
    • Update to 3.5.5-1ubuntu3.6
    • Update to 3.5.7-1~deb13u3
    • Update to 3.5.9
    • Update to 3.6.5
    • Update to 3.6.5-1
    • Update to 4.0.3
    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →