Bluetooth: hci_sync: Serialize local codec list cleanup
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Serialize local codec list cleanup
hci_dev_close_sync() clears hdev->local_codecs after releasing hdev->lock.
Codec list additions and both traversals in sco_sock_getsockopt() use that
lock, but the close path does not. A close and BT_CODEC query can therefore
interleave as follows:
hci_dev_close_sync() sco_sock_getsockopt()
hci_dev_lock()
fetch codec entry
hci_codec_list_clear()
kfree(entry)
read entry->id
The reader then accesses an entry
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
btrfs: take commit root semaphore when iterating in mark_block_group_to_copy()
In the Linux kernel, the following vulnerability has been resolved:
btrfs: take commit root semaphore when iterating in mark_block_group_to_copy()
mark_block_group_to_copy() iterates over the commit root with
skip_locking=true. A concurrent transaction commit can swap and free
the commit root during iteration, causing use-after-free when
accessing extent buffers.
Fix it by using path->need_commit_sem to protect the commit root search.
In the Linux kernel, the following vulnerability has been resolved:
ipv6: xfrm: use full sockets in local error paths
xfrm6_local_rxpmtu() and xfrm6_local_error() dereference skb->sk as if it
always pointed at a full IPv6 socket.
That is not guaranteed. TCP SYN-ACK skbs can be owned by a
TCP_NEW_SYN_RECV request_sock while the output path itself is driven by the
full listener. If rerouting selects an IPv6 XFRM tunnel route with a lower
MTU, the local PMTU/error handling path can reach these callbacks with that
mini-socket still attached to the skb.
The callbacks then miscast the request socket as a full inet/IPv6 socket and
can read beyon
In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: fix RX checksum use-after-free
lan743x_rx_process_buffer() adds each non-first receive buffer to the
head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb()
linearizes the head and frees the fragment skb metadata.
The checksum-success path then writes ip_summed through the local skb
pointer, which still points to the final fragment. This causes a
use-after-free write when a packet spans more than one receive buffer.
Set ip_summed on the surviving head skb instead. Multi-buffer receive
can occur after a live MTU increase because existing ring e
net: wwan: t7xx: validate the netif index in t7xx_ccmni_recv_skb()
In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: validate the netif index in t7xx_ccmni_recv_skb()
The netif index carried in the DPMAIF PIT header is five bits wide,
but ccmni_inst[] only has room for NIC_DEV_MAX (21) entries.
t7xx_ccmni_recv_skb() indexes the array without a bounds check, so
indexes 21 to 31 read past it. The out-of-bounds value lands in the
callback table that follows the array, which is never NULL, so the
existing !ccmni check does not catch it and the driver dereferences
whatever sits there as a struct t7xx_ccmni.
Drop the skb when the index is out of range.
Verified in a QEMU gu
net: wwan: mhi_wwan_mbim: guard against a cyclic NDP chain
In the Linux kernel, the following vulnerability has been resolved:
net: wwan: mhi_wwan_mbim: guard against a cyclic NDP chain
The NDP traversal in mhi_mbim_rx() only stops when wNextNdpIndex is
zero. Nothing requires the offsets to advance, so a modem that
points an NDP at itself, or at an earlier NDP, keeps the loop
spinning forever on one CPU.
Break out when the next NDP offset is not larger than the current
one.
Verified in a QEMU guest with a fault injector feeding the driver's
receive callback an NTB whose single NDP points at itself: the
unpatched driver spins in mhi_mbim_rx() with one CPU pinned at 100%
and the thread never retu
net: wwan: mhi_wwan_mbim: check skb_copy_bits() return value
In the Linux kernel, the following vulnerability has been resolved:
net: wwan: mhi_wwan_mbim: check skb_copy_bits() return value
mhi_mbim_rx() ignores the return value of skb_copy_bits() when it
copies each datagram out of the NTB. The datagram offset and length
come from the DPE, which is only checked to lie within the NTB
itself, so a modem can point a datagram outside the received skb.
The copy then fails and the freshly allocated skbn is passed to
netif_rx() with its uninitialized contents still in place, leaking
kernel heap memory into the network stack.
Free the skb and account an error when the copy fails.
Verified in a QEMU gues
In the Linux kernel, the following vulnerability has been resolved:
net/sched: hhf: cap hh_flows_limit at change time
hhf_change() stores TCA_HHF_HH_FLOWS_LIMIT with no upper bound. A huge
hh_flows_limit lets each new heavy-hitter flow pass the
hh_flows_current_cnt check in alloc_new_hh() and forces a fixed-size
kzalloc(GFP_ATOMIC) per flow under spoofed traffic, for unbounded memory
growth.
Bound the attribute with NLA_POLICY_MAX() at 2*HH_FLOWS_CNT (the
hhf_init() default) and report the rejected value via extack. The
deprecated nested parse is kept: legacy tc does not set NLA_F_NESTED on
TCA_OPTIONS. Configs relying on hh_limit above th
In the Linux kernel, the following vulnerability has been resolved:
net/packet: clear RX owner on VNET header error
Commit 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race
condition") added rx_owner_map and made tpacket_rcv() claim a V1 or V2
ring slot before converting the virtio-net header. If the conversion
fails, the drop path leaves the slot claimed.
With a one-frame TPACKET_V2 ring, an unsupported UDP GSO packet leaves
the only slot unavailable, so the ring also drops the next valid packet.
Clear the ownership bit on this error path. TPACKET_V3 already clears
its block state here.
In the Linux kernel, the following vulnerability has been resolved:
xfrm: save input state data before secpath resets
xfrm_input() stores the current xfrm_state in the skb secpath while it
continues receive-side processing. Some input paths can reset that secpath
before xfrm_input() has finished dereferencing the state.
Receive callback users such as VTI and XFRM interfaces can reset the
secpath. The VTI receive path does so before checking whether the packet
crosses network namespaces, while the XFRM interface path does so only for
cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also
reset the secpath before the final d
memstick: ms_block: destroy io_queue workqueue on removal
In the Linux kernel, the following vulnerability has been resolved:
memstick: ms_block: destroy io_queue workqueue on removal
msb_init_disk() creates the per-card ordered workqueue msb->io_queue with
alloc_ordered_workqueue(). It is torn down with destroy_workqueue() only
on the init error path; msb_remove() never destroys it. msb_stop() merely
flushes the queue, and neither msb_data_clear() nor put_disk() free it. As
a result every card insert/remove cycle leaks the workqueue and its
kworker, exhausting kernel memory over repeated cycles.
Destroy the workqueue in msb_remove() after the disk has been removed and
the queue drained.
KEYS: encrypted: fix integer overflow of datablob_len
In the Linux kernel, the following vulnerability has been resolved:
KEYS: encrypted: fix integer overflow of datablob_len
encrypted_key_alloc() stores datablob_len in a u16. It is computed from
multiple string and payload lengths. If the result exceeds U16_MAX, the
assignment truncates the allocation size. KASAN reports a 32760-byte
slab-out-of-bounds write when __ekey_init() copies the master key
description into the undersized buffer.
The total payload length stored in key->datalen is also a u16. Use
check_add_overflow() to reject values that do not fit either destination,
and use kzalloc_flex() for the flexible-array allocation.
In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix tpm2_load_cmd() boundary check
tpm2_load_cmd() does boundary checks against the ASN.1 size i.e.,
payload->blob_len. Address this by passing the decoded blob size to
tpm2_load_cmd(), and use it for the boundary checks.
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
In the Linux kernel, the following vulnerability has been resolved:
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
register_pkey_tree() ignores errors from register_one_pkey_tree() and
continues registering the remaining slaves. The per-slave error path has
already released the pkey parent kobjects, but their pointers remain
stored in the device. A later device cleanup therefore passes the stale
pointers to kobject_put(), causing a use-after-free.
Clear the parent pointers after releasing a failed slave tree and skip
unregistered trees during device cleanup. This preserves the existing
best-effort registration behavior whil
mmc: core: Cancel SDIO IRQ work before freeing host
In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Cancel SDIO IRQ work before freeing host
A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work
from its interrupt handler. That work is only cancelled on the suspend
path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed
just before the controller freed its IRQ can run after
mmc_host_classdev_release() has freed the host and dereference it through
container_of().
Cancel host->sdio_irq_work in mmc_free_host(), like the existing
host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel
delayed work before releasi
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
mmc: hsq: Fix use-after-free in retry work
In the Linux kernel, the following vulnerability has been resolved:
mmc: hsq: Fix use-after-free in retry work
mmc_hsq_pump_requests() queues retry_work when request_atomic() returns
-EBUSY; today sdhci-sprd is the only consumer that implements
request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but
is never cancelled during driver removal. Work still pending at unbind
can therefore run after the devm allocation has been released and
dereference hsq->mmc and hsq->mrq.
Use devm_work_autocancel() to cancel and drain retry_work before the devm
allocation is released. By the time devres cleanup begins,
mmc_remove_host() has alr
mmc: mxcmmc: cancel data work and watchdog on remove
In the Linux kernel, the following vulnerability has been resolved:
mmc: mxcmmc: cancel data work and watchdog on remove
mxcmci_remove() frees the host through the devm tail, but neither it nor
mmc_remove_host() drains the driver's own asynchronous state.
host->watchdog, a 10 s timer armed on the DMA path in mxcmci_setup_data(),
is deleted only by the DMA- and IRQ-complete paths, which the remove path
does not explicitly drain; it can therefore fire after the host is freed
and dereference it in mxcmci_watchdog(). host->datawork, armed from the
IRQ handler on the PIO path, is not cancelled by the remove path either.
Free the devm-registere
mmc: sdhci-of-aspeed: Remove children before releasing SDC resources
In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-of-aspeed: Remove children before releasing SDC resources
Probe failure and removal leave SDHCI child devices registered after the
parent clock and managed resources are released.
Unregister the OF children in reverse order before disabling the parent
clock on both paths. Use of_platform_device_destroy() because manual
child creation does not set the flag required by of_platform_depopulate().
This issue was identified during our ongoing static-analysis research
while reviewing kernel code.
mmc: sdio_uart: fix xmit_fifo leak when the port table is full
In the Linux kernel, the following vulnerability has been resolved:
mmc: sdio_uart: fix xmit_fifo leak when the port table is full
sdio_uart_add_port() allocates the transmit fifo before claiming a
slot in sdio_uart_table[]. When all UART_NR slots are taken, it
returns -EBUSY with the fifo still allocated, but the probe error
path only kfree()s the port, leaking the transmit fifo.
Free the fifo in the failure path of sdio_uart_add_port() itself so
the function retains nothing on error.
mmc: spi: reset bytes_xfered before retrying CRC failures
In the Linux kernel, the following vulnerability has been resolved:
mmc: spi: reset bytes_xfered before retrying CRC failures
mmc_spi_data_do() updates data->bytes_xfered after each block has been
transferred successfully. If a later block in the same data request
fails with a CRC error, data->bytes_xfered may therefore contain the
number of bytes completed before the failing block.
mmc_spi_request() has a private recovery path for such CRC failures. It
sends STOP_TRANSMISSION, clears data->error and jumps back to
crc_recover to issue the same command and data request again. However,
it does not clear data->bytes_xfered before the retry